Summary:
This is to fix the conflicts between Eradicate and the Biabduction when reporting the same kind of errors: when Eradicate is on, the Eradicate warnings will have priority over the null deference reported by the biabduction.
If this approach proved to be successful in prod, I will refactor the reporting mechanism in the analysis itself to simply not report the null dereference in this case at all. For the codebases that aren't yet fully consistently using `Nullable`, this combined approach looks like a good way to deploy Infer toward full null safety.
Reviewed By: mbouaziz
Differential Revision: D7102119
fbshipit-source-id: 35d3add
Summary:
This allows Eradicate to lookup the annotations from the classpath and without requiring the code in the classpath to have been previously analyzed. The benefit is that source files can be analyzed independently of each other as long as the classpath is known.
The main goal is to run be able to run Eradicate as a linter without losing warnings.
We may have to add some more models of the standard libraries as no `Nullable` on a parameter does not necessarily mean that the method does not accept `null`.
Reviewed By: sblackshear
Differential Revision: D6921720
fbshipit-source-id: f525269
Summary:
Record "capture phases" in the runstate and in the source files table of the
database. Use this instead of filesystem timestamps to decide which files need
re-analyzing in the reactive analysis.
Reviewed By: jeremydubreil
Differential Revision: D6760833
fbshipit-source-id: 7955621
Summary:
The infer results directories in buck-out/ are "cleaned up" to avoid polluting
the Buck cache with too much data or non-deterministic data. In particular, the
runstate is deleted, which confused subsequent infer processes trying to read
the pre-existing results directory.
Add a special case in infer to delete pre-existing results directories in
buck-out instead of trying to load their state.
Reviewed By: mbouaziz
Differential Revision: D6845128
fbshipit-source-id: 5c716aa
Summary: This should allow to report several occurences of the an issue appearing several times within the same method.
Reviewed By: jvillard
Differential Revision: D6783298
fbshipit-source-id: 5555906
Summary:
Not sure what an "iCFG" is but the dotty is only about CFGs anyway.
Diff obtained by mass-`sed`.
Reviewed By: sblackshear
Differential Revision: D6324280
fbshipit-source-id: b7603bb
Summary:
Record the db schema, infer version, and run dates into
infer-out/.infer_runstate.json. This allows us to check on startup whether the
results directory was generated using a compatible version of infer or not, and
give a better error message in the latter case than some SQLite error about
mismatching tables.
This will be used in a follow-up diff to record capture phases too, and avoid
relying on filesystem timestamps of the infer-out/capture/foo/ directories for
reactive analysis.
Had to change some tests Makefiles to make sure they do not attempt to re-use
stale infer-out directories, which would now fail the run.
The stale infer-out directory gets deleted if `--force-delete-results-dir` is
passed (but a warning still gets printed).
Reviewed By: mbouaziz
Differential Revision: D6760787
fbshipit-source-id: f36f7df
Summary:
In Java, static variables are distinguished by package/class:
the file where they are defined doesn't matter.
Fixes#831.
Closes https://github.com/facebook/infer/pull/833
Reviewed By: jeremydubreil
Differential Revision: D6661240
Pulled By: sblackshear
fbshipit-source-id: beeb2f9
Summary:
Some commands (mostly `infer report`) would attempt to run the initialisation
code of infer from the default results directory instead of the one used by the
test. This is mostly harmless because we do not actually use anything from the
directory (typically, we pass `--from-json-results foo.json` and only foo.json
matters). However, this can trip the initialisation code, eg on db schema
changes.
Reviewed By: mbouaziz
Differential Revision: D6711641
fbshipit-source-id: f04b4c7
Summary: This will avoid collisions when the inner classes are implementing the same methods. For example, the previous version of the bug hash could conflate the issues when several annonymous inner classes are implementing the same method, e.g. a annonymous subclass of `Runnable` implementing `run()`.
Reviewed By: sblackshear
Differential Revision: D6461594
fbshipit-source-id: 2bb8545
Summary:
It seems that the abstraction instructions were not previously added the the CFG.
This is a functional changes to make sure that the abstraction state is always added. We can simplify the code later and just run this step before storing the CFG instead of after loading them.
Reviewed By: sblackshear, jvillard
Differential Revision: D6383672
fbshipit-source-id: cedcb8a
Summary: This option was for compatibility with the command line options of the previous, but is no longer used. This diff removes the option and the deprecated code.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6351097
fbshipit-source-id: 0e4cfc5
Summary:
This diff adds a new way of executing blocks when they are passed as parameters to a method. So far we just skipped the block in this case.
Now we can execute it. Let's demonstrate with an example. Say we have
//foo has a block parameter that it executes in its body
foo (Block block) { block();}
// bar calls foo with a concrete block
bar() {
foo (^(){
self->x = 10;
});
};
Now, when we call the method foo with a concrete block, we create a copy of foo instantiated with the concrete block, which in itself is translated as a method with a made-up name.
The copy of foo will get a name that is foo extended with the name of the block parameter, the call to the block parameter will be replaced to a call to the concrete block, and the captured variables
of the concrete block (self in this case), will be added to the formals of the specialized method foo_block_name.
This is turned on at the moment for ObjC methods with ObjC blocks as parameters, and called with concrete blocks. Later on we can extend it to other types of methods, and to C++ lambdas, that are handled similarly to blocks.
Another extension is to check when the block has been called with nil instead of an actual block, and raise an error in that case.
After this diff, we can also model various methods and functions from the standard library that take blocks as parameters, and remove frontend hacks to deal with that.
Reviewed By: ddino
Differential Revision: D6260792
fbshipit-source-id: 0b6f22e
Summary: The Java bytecode does not contain information about the location of abstract of interface methods. Before this diff, the analysis trace was tuncated and the file where the abstract or interface method was not included in the trace, which makes it harder to understand the Infer report, especially when the method is on a generated file that is not checked in the repository.
Reviewed By: sblackshear
Differential Revision: D6223612
fbshipit-source-id: c80c6f2
Summary:
Due to limitations in our Buck integration, the thread-safety analysis cannot create a trace that bottoms out in a Buck target that is not a direct dependency of the current target.
These truncated traces are confusing and tough to act on.
Until we can address these limitations, let's avoid reporting on truncated traces.
Reviewed By: jeremydubreil
Differential Revision: D5969840
fbshipit-source-id: 877b9de
Summary:
:
Make both buck capture and compilation database handle buck command line arguments and invoke buck query the same way.
Plus allow:
- target patterns `//some/dir:` and `//some/dir/...`. However since `//some/dir:#flavor` and `//some/dir/...#flavor` are not supported, they need to be expanded before adding the infer flavor.
- target aliases (defined in `.buckconfig`)
- shortcuts `//some/dir` rewritten to `//some/dir:dir`
- relative path `some/dir:name` rewritten to `//some/dir:name`
Reviewed By: jvillard
Differential Revision: D5321087
fbshipit-source-id: 48876d4
Summary:
This is in the spec for clang compilation databases.
Also improves error messages when we fail to parse the compilation database.
closes#771
Reviewed By: dulmarod
Differential Revision: D6123832
fbshipit-source-id: 070f70f
Summary: In preparation for making `-a checkers` the default (when no analyzer is specified), let's test `-a checkers` by default.
Reviewed By: mbouaziz
Differential Revision: D6051177
fbshipit-source-id: d8ef611
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
This adds more structure to the SQL schema backing attributes. With that, we
can transfer the logic for updating attributes in SQLite, instead of doing
optimistic concurrency in the client.
Reviewed By: jberdine
Differential Revision: D5891038
fbshipit-source-id: 6577ba2
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Summary:
With this change and the previous facebook-clang-plugins change, infer no
longer exhausts the biniou buffer when reading the serialized C++ AST.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5891081
fbshipit-source-id: cf48eac
Summary: Infer can then detect the resource leak when resources are stored into a container
Reviewed By: sblackshear
Differential Revision: D5887702
fbshipit-source-id: 6106cfb
Summary: Model the `remove(...)` and the `clear()` method of `HashMap`.
Reviewed By: sblackshear
Differential Revision: D5887674
fbshipit-source-id: c3f40ee
Summary:
It's useful to be able to disable de-duplication on the command line with `--no-filtering`.
Gate de-duplication with `Config.filtering` and move the de-duplication tests to a new directory under the build systems tests.
Reviewed By: jeremydubreil
Differential Revision: D5865329
fbshipit-source-id: 5094f5b
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary:
We need to make sure that destructors of virtual base classes are called only once. Similarly to what clang does, we have two destructors for a class: a destructor wrapper and an inner destructor.
Destructor wrapper is called from outside, i.e., when variables go out of scope or when destructors of fields are being called.
Destructor wrappers have calls to inner destructors of all virtual base classes in the inheritance as their bodies.
Inner destructors have destructor bodies and calls to destructor wrappers of fields and inner destructors of non-virtual base classes.
Reviewed By: dulmarod
Differential Revision: D5834555
fbshipit-source-id: 51db238
Summary:
Simple instance of the problem: analyzing the following program times out.
```
#include <tuple>
void foo() {
std::tuple<std::tuple<int>> x;
}
```
Replacing `std::tuple<std::tuple<int>>` by `std::tuple<int>` makes the analysis
terminate.
In the AST, both tuple<tuple<int>> and tuple<int> have the same template
specialization type: "Pack" (which means we're supposed to go look into the
arguments of the template to get their values). This is not information enough
and that's the plugin fault.
On the backend side, this means that two types have the same Typ.Name.t, namely
"std::tuple<_>", so they collide in the tenv. The definition of
tuple<tuple<int>> is the one making it into the tenv. One of the fields of the
corresponding CxxRecord is of type "tuple<int>", which we see as the same
"tuple<_>", which causes the loop.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5775840
fbshipit-source-id: 0528604
Summary:
Sort the complete set of warnings by everything except procname, then de-duplicate.
This scheme prevents reporting identical error messages on the same line/same file.
This is important for avoiding duplicate reports on multiple instantiations of the same template.
Reviewed By: jberdine
Differential Revision: D5819467
fbshipit-source-id: 984f47f
Summary: The resolution was previously only happening for constructors, but calls to private methods or to `super` are also neither static calls nor virtual calls. In this case, the resolution logic should be the same as for constructors.
Reviewed By: sblackshear
Differential Revision: D5830376
fbshipit-source-id: 9b56f80
Summary: With this diff, the analysis trace will jump to the definition of the skipped methods when the location is known. This is especially useful when the analysis is relying on the method annotations.
Reviewed By: sblackshear
Differential Revision: D5783428
fbshipit-source-id: 561b739
Summary: The list of fields of a Java object in SIL is the list of fields declared in the class plus all the fields declared in the the super classes. It turns out that we were missing the fields declared in the implemented interfaces.
Reviewed By: sblackshear
Differential Revision: D5720386
fbshipit-source-id: d65c9de
Summary: We inject destructor calls of base classes inside destructor bodies after the destructor calls of fields.
Reviewed By: dulmarod
Differential Revision: D5745499
fbshipit-source-id: 90745ec
Summary: This adds an option to only translate the body of a method when the file matches the give pattern. This is especially intended to be use for generated files.
Reviewed By: jvillard
Differential Revision: D5729120
fbshipit-source-id: 1e28469
Summary: With this, we can now get now get inter-procedural issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5730638
fbshipit-source-id: 3bdbdbd
Summary: This makes the traces more readable when involving skipped functions.
Reviewed By: sblackshear
Differential Revision: D5731683
fbshipit-source-id: 49d363b
Summary: This new tests outlines that Infer does not detect inter-target issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5720873
fbshipit-source-id: cce8193
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary:
The `-index-store-path` argument does not exist in Clang 5.0 and it gets discarded without any error message. The problem is that its argument, a folder, is not discarded, and Clang considers it as a source file. This leads to the following errors:
- `cannot specify -o when generating multiple output files` (this happens if a `-o` argument is passed)
- `error reading '<PATH>'` (this can be observed when running the "normalized" version of the clang command, generated via the -### flag)
This weird case can be observed when `-index-store-path` is passed in a sequence like the following: `-x c -index-store-path <PATH> -c`.
With this change, we remove the `index-store-path` option, and its argument, from the original clang command.
Reviewed By: jvillard
Differential Revision: D5601808
fbshipit-source-id: 4200308
Summary:
Use jbuilder to build infer instead of ocamlbuild. This is mainly to get faster builds:
```
times in 10ms, ±differences measured in speedups, 4 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|-----------------------------------+-----------+------+--------+----------+------+-------+---------+-----+------+---------+------+------|
| byte from scratch | 6428 | 2456 | 2.62 | 7743 | 6662 | 1.16 | 138 | 331 | 2.40 | 1184 | 1477 | 0.80 |
| native from scratch | 9841 | 4289 | 2.29 | 9530 | 8834 | 1.08 | 110 | 245 | 2.23 | 1373 | 1712 | 0.80 |
| byte after native | 29578 | 1602 | 18.46 | 4514 | 4640 | 0.97 | 170 | 325 | 1.91 | 543 | 576 | 0.94 |
| change infer.ml byte | 344 | 282 | 1.22 | 292 | 215 | 1.36 | 96 | 99 | 1.03 | 040 | 066 | 0.61 |
| change infer.ml native | 837 | 223 | 3.75 | 789 | 174 | 4.53 | 98 | 99 | 1.01 | 036 | 47 | 0.77 |
| change Config.ml byte | 451 | 339 | 1.33 | 382 | 336 | 1.14 | 97 | 122 | 1.26 | 056 | 80 | 0.70 |
| change Config.ml native | 4024 | 1760 | 2.29 | 4585 | 4225 | 1.09 | 127 | 276 | 2.17 | 559 | 644 | 0.87 |
| change cFrontend_config.ml byte | 348 | 643 | 0.54 | 297 | 330 | 0.90 | 96 | 67 | 0.70 | 038 | 102 | 0.37 |
| change cFrontend_config.ml native | 1480 | 584 | 2.53 | 1435 | 906 | 1.58 | 106 | 185 | 1.75 | 136 | 178 | 0.76 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
50 cores
| | ocb total | jb | ±total | ocb user | jb | ±user | ocb cpu | jb | ±cpu | ocb sys | jb | ±sys |
|---------------------+-----------+------+--------+----------+------+-------+---------+----+------+---------+------+------|
| byte from scratch | 9114 | 2061 | 4.42 | 9334 | 5133 | 1.82 | | | 0/0 | 2566 | 1726 | 1.49 |
| native from scratch | 13481 | 3967 | 3.40 | 12291 | 7608 | 1.62 | | | 0/0 | 3003 | 2100 | 1.43 |
| byte after native | 3467 | 1476 | 2.35 | 5067 | 3912 | 1.30 | | | 0/0 | 971 | 801 | 1.21 |
#+TBLFM: $4=$2/$3;f2::$7=$5/$6;f2::$10=$9/$8;f2::$13=$11/$12;f2
```
Menu:
1. Write a jbuild file, autogenerated from jbuild.in because we need to fill in
some information at build-time (really, at configure time, but TODO), such as
whether or not clang is enabled.
2. Nuke lots of stuff from infer/src/Makefile that is now in the jbuild file
3. The jbuild file lives in infer/src/ so it can see all the sources. If we put it somewhere else, eg, infer/, then `jbuilder` scans too many files (all irrelevant) and takes 2.5s to start instead of .8s. Adding irrelevant directories to jbuild-ignore does not help.
4. jbuilder does not support subdirectories, so resort to listing all the
source files in the generated jbuild (only source directories need to be
manually listed in jbuild.in though). Still, the generated .merlin is wrong
and makes merlin find source files in _build, so manually tune it to get
good merlin support. We also lose some of merlin for unit tests as it
cannot see their build artefacts anymore.
5. checkCopyright gets its own jbuild because it's standalone. Also, remove
some deprecation warnings in checkCopyright due to the new version of Core from
a while ago.
6. Drop less-used Makefile features (they had regressed anyway) such as
building individual modules. Also, building mod_dep.pdf now takes all the
source files available so they better build (before, it would only take the
source files from the config, eg with or without clang) (that's pretty minor).
7. The toplevel is now built as a custom toplevel because that was easier. It
should soon be even easier: https://github.com/janestreet/jbuilder/issues/210
8. Move BUILTINS.mli to BUILTINS.ml because jbuilder is not happy about
interface files without implementations.
In particular, I did not try to migrate too much of the Makefile logic to jbuilder,
more can be done in the future.
Reviewed By: jberdine
Differential Revision: D5573661
fbshipit-source-id: 4ca6d8f
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary: That was too noisy. Propagate `--quiet` to the Python reporting hook so as to still emit bugs.txt and so on.
Reviewed By: martinoluca
Differential Revision: D5501106
fbshipit-source-id: 63b6451
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary:
Cosmetic changes to the output of `make clean` and `make test-replace`.
Run the inferTraceBugs tests from tests/build_systems/ like other such e2e
tests, so that they can run in parallel with other tests instead of
sequentially at the end.
Reviewed By: dulmarod
Differential Revision: D5526599
fbshipit-source-id: 57231bd
Summary:
This was an oversight. The prologue has to be run before capture and analysis
(see eg Infer.run). This sets up a bunch of things that are useful for the
diff analysis as well.
Reviewed By: jeremydubreil
Differential Revision: D5499405
fbshipit-source-id: 8f339cf
Summary: The `--failures-allowed` was doing for the Clang frontend what `--keep-doing` was doing for the backend. This revision merges the two options to simplify the Infer CLI and our tests.
Reviewed By: jvillard
Differential Revision: D5474347
fbshipit-source-id: 09bcea4
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Fixes#683
Disclaimer: I don't know what XML namespaces/namespace prefixes are, but this seems to do the trick.
Reviewed By: mbouaziz
Differential Revision: D5381480
fbshipit-source-id: 3da16e7
Summary: So that it get rebuilt. Test is clang_compilation_db_relpath
Reviewed By: mbouaziz
Differential Revision: D5364561
fbshipit-source-id: 8cae984
Summary: It was passing the argument multiple times rather than once with all the accepted values
Reviewed By: jvillard
Differential Revision: D5338509
fbshipit-source-id: 22b86a5
Summary:
Once the fixed/preexisting/introduced sets have been computed, they endure
further filtering which may decide that more of them are equal. These bugs just
get dropped on the floor. Put these into preexisting as well instead, at least
in the case of the "skip_duplicated_types_on_filenames" filter.
Reviewed By: martinoluca
Differential Revision: D5274248
fbshipit-source-id: 99b3f3d
Summary:
:
What is relevant for the Buck integration is not the list of bugs that we find in a single target, which is essentially identical to testing `infer -- javac ...`, but to make sure that we still find the issues that are involving several Buck targets, and later other things like the caching mechanism.
This should also make the tests faster.
Reviewed By: jberdine, jvillard
Differential Revision: D5250205
fbshipit-source-id: 7f66b68
Summary: This change introduces the a new argument that lets you restrict the results of a differential report to only certain files.
Reviewed By: mbouaziz
Differential Revision: D5236626
fbshipit-source-id: 52711e9
Summary:
This messes up with the Buck cache: if infer recaptures a file with only trivial changes that shouldn't affect the capture Buck will still believe it has to reanalyze everything that depends on that file if there's non-deterministic data in infer's output.
Re-use the `--buck` flag used by the Java Buck integration for mostly the same purposes. Add a few special cases for the flavours integration (eg: keep capture data).
Change perf stats registration to take `Config.buck_cache_mode` into account instead of relying on each call site to handle that peculiarity correctly. Also, there's no need to create the perf stats directories before calling the registration function since it will do that too.
Reviewed By: jeremydubreil
Differential Revision: D5192311
fbshipit-source-id: 334ea6e
Summary: This also allows us to better test that the new commands will keep working.
Reviewed By: jeremydubreil
Differential Revision: D5172891
fbshipit-source-id: 169bd6f
Summary: This fixes a couple of false positives as objects of BufferedReader don't need to be closed if the wrapped reader resource gets closed correctly.
Reviewed By: sblackshear
Differential Revision: D5106596
fbshipit-source-id: 725fb80
Summary:
Introduce `infer-<command>` for each command, except for internal commands
(only `infer-clang` for now) which are not exported. Install these executables
(which are just symlinks to `infer`) on `make install`. The main executable
looks at the name it was invoked with to figure out if it should behave as a
particular command.
Get rid of `InferClang`, `InferAnalyze`, and `InferPrint`. As a bonus, we now
only need to build one executable: `infer`, which should be a few seconds
faster (less link time).
`InferAnalyze` is now `infer-analyze` and `InferPrint` is `infer-print`. To run
`InferClang`, use a symlink named `clang`, `clang++`, etc. to `infer`. There
are such symlinks available in "infer/lib/wrappers/" already.
I also noticed that the scripts in xcodebuild_wrappers/ don't seem useful
anymore, so use wrappers/ instead, as for `make`.
Reviewed By: mbouaziz
Differential Revision: D5036495
fbshipit-source-id: 4a90030
Summary:
Don't store redundant information in C++ template Type.Name.t.
New signature:
```
| CppClass (qual_name, template_args)
```
For example, for `std::shared_ptr<int>`, will look like this:
```
| CppClass (["std", "shared_ptr"], Template [int])
```
While it used to be:
```
| CppClass (["std", "shared_ptr<int>"], Template (["std", "shared_ptr"], [int]))
```
Reviewed By: jberdine, mbouaziz
Differential Revision: D4834512
fbshipit-source-id: cb1c570
Summary:
Title.
The way types are printed is completely valid, but little weird for some C++ programmers:
`int const` - same as `const int`
`int * const` - pointer is `const`, value under it is not
`int const *` - pointer is not `const`, but the value is
`int const * const` - both pointer and value are const
Reviewed By: jberdine
Differential Revision: D4962180
fbshipit-source-id: dcb02e3
Summary: Sometimes reports need traces to be fully understood, but sometimes reporting where the exception takes place can save time to developers.
Reviewed By: jvillard
Differential Revision: D4914037
fbshipit-source-id: 039ab63
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
Add support for Makefiles to the copyright linter. Makefiles are a bit
different than shell because they should start with the copyright notice
straight away (whereas shell starts with the #! stuff).
Reviewed By: mbouaziz
Differential Revision: D4786620
fbshipit-source-id: 504dc23
Summary:
It can be useful when debugging infer or the Makefiles themselves to see what
`make` is doing. Instead of editing Makefiles to remove `@` now you can `make
VERBOSE=1`.
This is just `git ls-files | grep -e Makefile -e '.*\.make' | xargs sed -e 's/^\t@/\t$(QUIET)/' -i`, and adding the definition of `QUIET` to Makefile.config.
Reviewed By: jeremydubreil
Differential Revision: D4779115
fbshipit-source-id: e6e4642
Summary:
Most of our tests work by comparing the output of some command to a baseline
expected output. It's often needed to update that baseline.
Previously, that was crudely done by attempting to move every foo.exp.test file
to foo.exp. This does not work terribly well, in particular because
foo.exp.test might be stale.
Instead, add a `replace` target to every test that knows how to update the
baseline. This allows custom behaviours too, eg in the differential tests.
Most of the tests include base.make or differential.make, so add a replace target
there. A few tests are completely custom, add a replace target to them too.
Reviewed By: jeremydubreil
Differential Revision: D4754279
fbshipit-source-id: ec34273
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary:
Two issues in the previous code:
1. We'd just tack on `#compilation-database` so if there already are `#flavors`
in a Buck target then we get a malformed `#flavors#compilation-database`
instead of `#flavors,compilation-database`. There's already code to deal
with that for other flavors (`#infer-capture-all`), so extend and reuse that.
2. The code didn't work if there are spaces in target names (sigh). Harden the
code a bit so that it works. Unfortunately Buck doesn't escape spaces at all
in its `buck targets --show-output` output, so the parsing still relies on
there being no spaces in flavors to work correctly. Sample output:
```
$ buck targets --show-full-output //clang_compilation_database:Hel\ lo#compilation-database
Not using buckd because watchman isn't installed.
[+] PROCESSING BUCK FILES...0.1s [100%] 🐳 New buck daemon
//clang_compilation_database:Hel lo#compilation-database /home/jul/infer/infer/tests/build_systems/codetoanalyze/buck-out/gen/clang_compilation_database/__Hel lo#compilation-database.json
```
Also, some code in codetoanalyze/clang-compilation-database/ didn't compile, so
fix that.
Reviewed By: dulmarod
Differential Revision: D4714338
fbshipit-source-id: b8ae324
Summary:
This makes sure that one can run `./build-infer.sh` then `make`. Otherwise it's
not always clear what one should do to recompile infer, eg when `make` will
work and when `./build-infer.sh` should be used instead, in particular when the
user doesn't have opam configured for her terminal.
Reviewed By: jberdine
Differential Revision: D4698159
fbshipit-source-id: 5df8059
Summary:
We were including hex of empty string if mangled name was not empty (so for all C++ functions).
Instead, include hex of a source file only if it's not empty
Reviewed By: mbouaziz
Differential Revision: D4705388
fbshipit-source-id: 55b6587
Summary:
Procnames files are now reversed qualifier lists with `#` as separator (instead of `::` which needs to be escaped in bash).
Because of the mechanism that is used to obtain qualifiers, it also affects naming for ObjC classes.
Examples:
```
std::unique_ptr<int>::get -> get#unique_ptr<int>#std#__MANGLED,...__ // C++ method
folly::split -> split#folly#__MANGLED,..._ // function within namespace
NSNumber numberWithBool: -> numberWithBool:#NSNumber#class // ObjC method
```
Reviewed By: jvillard
Differential Revision: D4689701
fbshipit-source-id: c3acfc6
Summary:
There is no point in attaching plugin to `clang -E` calls since they don't produce any AST.
Same applies to `-M`, `-MM`, etc. (but not `-MD` nor `-MMD`).
Reviewed By: jvillard
Differential Revision: D4681618
fbshipit-source-id: 7a76add
Summary:
When parsing .inferconfig and the env var, allow all modes of infer. This
allows people to provide default values for options in .inferconfig. This
requires subcommands' options to be all distinct, but that's already the case.
Reviewed By: jberdine
Differential Revision: D4674672
fbshipit-source-id: 992b454
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
Make sure `inferTraceBugs` works with non-ascii characters. Harden the code a
bit more on the way.
Fixes#592
Reviewed By: mbouaziz
Differential Revision: D4659016
fbshipit-source-id: 79f7a80
Summary:
- The package declaration was wrong
- There was a leftover copy-pasted resource leak test from `CursorLeak.java`.
Reviewed By: sblackshear
Differential Revision: D4612687
fbshipit-source-id: 42c1a35
Summary:
Running Buck can be very expensive depending on your installation of Buck (eg,
no watchman). Hardcoded paths seem good enough for now as `make test` will
catch if they go out of date.
Reviewed By: jeremydubreil
Differential Revision: D4597629
fbshipit-source-id: da9b704
Summary: Shorter is better. `--compilation-database` was taken, renaming it to `--buck-compilation-database`.
Reviewed By: dulmarod
Differential Revision: D4567028
fbshipit-source-id: 011cd6f
Summary:
Sevel auxiliary files made it to the output directory of the analysis of individual targets when analyzing Java projects build with Buck. However, these files are then taken into account= to compute the target rule key and then to decide whether to analyze the dependent targets. Since these auxiliary files were containing time sentive information, every cach miss on a given target would then invalitate the cache entries for all the dependent targets.
This diff cleans up the output directory to only keep the specs files, the `global.tenv` and the `report.json` files which are the only artifacts needed to analyze the dependent targets
This diff makes a minimal number of changes to see how it behaves in prod, but I intend to refoctor this more when continuing to add support for running Infer with genrules
Reviewed By: sblackshear
Differential Revision: D4562615
fbshipit-source-id: 4628420
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary: Some compilation databases give relatives paths for the `"file"` field. This is not ambiguous as there is also a `"dir"` field, so use that to make the path absolute when needed.
Reviewed By: dulmarod
Differential Revision: D4559145
fbshipit-source-id: be36a16
Summary: This annotation can then be used to suppress the warnings on non-android Java projects.
Reviewed By: sblackshear
Differential Revision: D4544858
fbshipit-source-id: 8a0b8fa
Summary: This case was already working but there was no tests for it
Reviewed By: sblackshear
Differential Revision: D4529473
fbshipit-source-id: ca3ff02
Summary: This fixes a wrong level of indirection when performing the type substitution.
Reviewed By: sblackshear
Differential Revision: D4521008
fbshipit-source-id: 7324ea6
Summary: This should fix the issue with broken invariants when the method specialization on pointer ends up doing a substitution on non pointer types
Reviewed By: sblackshear
Differential Revision: D4487232
fbshipit-source-id: f3fce84
Summary: Just adding some more test cases on how Infer handles dynamic dispatch.
Reviewed By: jberdine
Differential Revision: D4486529
fbshipit-source-id: d90ef42
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
Also make sure we don't introduce deprecated options in our repo, eg when
calling infer from infer.
Reviewed By: jeremydubreil
Differential Revision: D4430379
fbshipit-source-id: 77ea7fd
Summary: This allows to modify the structure of the buck project under test with less risk of breaking the tests
Reviewed By: sblackshear
Differential Revision: D4411721
fbshipit-source-id: 6ee2cc5
Summary:
This makes it more obvious why infer would force a path to be absolute since we
base that decision on the resolved path. For instance:
```
$ mkdir foo
$ cd foo
$ ln -s ../examples goo
$ infer -- clang -c goo/hello.c
[...]
/home/jul/infer/examples/hello.c:14: error: NULL_DEREFERENCE
```
We see that the path is outside of the current directory clearly, whereas
before infer would report on "goo/hello.c".
Reviewed By: akotulski
Differential Revision: D4409579
fbshipit-source-id: 7172005
Summary:
- Only generate one extra genrule for running infer. Remove all other java library rules currently being generated
- Generate infer genrule only if the `java_library` has `srcs`, otherwise there is nothing to analyze
- Use `SRCDIR` to avoid making a copy of the target sources as buck will just symlink them instead
- Added support for `android_library` rules as well
- Added support to generate both `infer` and `eradicate` genrules
Closes https://github.com/facebook/infer/pull/558
Reviewed By: sblackshear
Differential Revision: D4400365
Pulled By: jeremydubreil
fbshipit-source-id: 24750e2
Summary:
If we don't delete infer-out then it gets polluted with files from previous
versions of infer resulting in segfaults during `make test`.
Reviewed By: cristianoc
Differential Revision: D4397723
fbshipit-source-id: 1211d40
Summary:
The cmake test removes the _build dirs, and the utf8_in_pwd test
rsyncs them.
Reviewed By: akotulski
Differential Revision: D4375554
fbshipit-source-id: 3fa088c
Summary: Need to upgrade in order to specify some taint properties on a more recent `WebView` API.
Reviewed By: cristianoc
Differential Revision: D4382590
fbshipit-source-id: 0925742
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary:
Without this it's not always obvious which test fails. It also makes it easier
to mass-patch test failures from the CI jobs to replace expected outputs with
actual outputs (eg, when debugging osx frontend tests from linux).
Reviewed By: jberdine
Differential Revision: D4352205
fbshipit-source-id: 8887d7b
Summary:
Seems like we cannot run 2 instances of Buck in parallel even when one uses
buck-out/ and the other buck-out/foo/.
Reviewed By: sblackshear
Differential Revision: D4347090
fbshipit-source-id: 7e65d2f
Summary:
This will simplify the InferPrint logic of checking what should/should-not be reported.
I will remove the issue names in Localise in a next diff.
Reviewed By: ddino
Differential Revision: D4334327
fbshipit-source-id: ebcfd6c
Summary:
SuppressWarnings annotations are hardly used and add considerable
complexity due to requiring recompilation with an annotation processor.
Reviewed By: jvillard
Differential Revision: D4312193
fbshipit-source-id: c4fc07e
Summary:
Most of the diff adds a way to run an existing test with different infer
options.
Also, do not run the Python script when capturing "analyze".
fixes https://github.com/facebook/infer/issues/518
Reviewed By: jberdine
Differential Revision: D4333762
fbshipit-source-id: 642acff
Summary: These direct tests were still mostly relying on PHONY targets.
Reviewed By: jberdine
Differential Revision: D4326469
fbshipit-source-id: 37b2d0a
Summary:
We don't need to have separate `--` integration for compilation database. Instead use:
infer --compilation-db-files db.json <other_infer_options> // no -- anywhere!
Reviewed By: jberdine
Differential Revision: D4327570
fbshipit-source-id: caf0dc9
Summary: Allow backend to trigger compilation of extra files when it needs them. This will allow infer to capture less files initally and possibly speed up compilation
Reviewed By: cristianoc, jberdine
Differential Revision: D4231581
fbshipit-source-id: 181abea
Summary: Our C++ model magic didn't work when instantiating smart pointers with volatile types. Fix it
Reviewed By: jvillard
Differential Revision: D4313271
fbshipit-source-id: 55ffb98
Summary: Adding Buck `DEFS` macros for generating Infer genrules. The generated genrules can be used to run the analysis on any existing `java_library` targets.
Reviewed By: sblackshear
Differential Revision: D4291234
fbshipit-source-id: 6430e2e
Summary: Globals that are constexpr-initializable do not participate in SIOF.
Reviewed By: sblackshear
Differential Revision: D4277216
fbshipit-source-id: fd601c8
Summary:
Whenever header file is in changed-files-index, it should be captured and analyzed on demand.
It was already being captured, but ondemand analysis wasn't triggered for code in header file. This diff does it.
Use hacky header->source mapping to go from header to source (cluster) and then analyze everything in that cluster (inlucing code coming from header)
Reviewed By: jberdine
Differential Revision: D4265495
fbshipit-source-id: 61606f4
Summary: When infer runs on preprocessed source, original files may not be around anymore. Don't crash infer when that happens.
Reviewed By: jvillard, jberdine
Differential Revision: D4258285
fbshipit-source-id: a19569c
Summary: This should no work even when Infer is not setup in the PATH
Reviewed By: jvillard
Differential Revision: D4262356
fbshipit-source-id: e3fa779
Summary: Originially, there was a missing package declaration meaning that the generated class was ending in a different place. I also added a test for equality of Integer to complement the test of no equality, which could be always true.
Reviewed By: sblackshear
Differential Revision: D4263676
fbshipit-source-id: 86ab0d3
Summary:
Currently cfg nodes are written into dot files in whatever order they
appear in a hash table. This seems unnecessarily sensitive, so this
diff sorts the nodes.
Reviewed By: dulmarod
Differential Revision: D4232377
fbshipit-source-id: a907cc6
Summary:
Implement heuristic to capture more of the user code:
In C++ there is a lot of interesting code in header files. On the other hand,
that code gets included in multiple places and we don't want to capture it by default (for performance reasons).
Right now we capture everything from source file + all symbols from headers that source file needs.
New heuristic will extend "capturing everything" to matching header files (ie. capture everything in X.h if source file is X.cpp)
Reviewed By: jberdine
Differential Revision: D4238008
fbshipit-source-id: 0528250
Summary:
Dealing with symbolic links in project root is tricky. To avoid it, always normalize all paths to sources with `realpath`.
Changes to tests are expected - infer started to resolve symbolic links which screws up with our testing mechanism.
Reviewed By: jberdine
Differential Revision: D4237587
fbshipit-source-id: fe1cb01
Summary: Add new integration test for compilation databse integration. Because new test needs another flags in infer invocation, I created one directory per test.
Reviewed By: jberdine
Differential Revision: D4231659
fbshipit-source-id: 81bb355
Summary:
Add test for compilation database and --changed-files-index option
Fix one bug that the test uncovered
Reviewed By: dulmarod
Differential Revision: D4198502
fbshipit-source-id: 9039c65
Summary:
Developers will sometimes write GuardedBy("T.f") with the intended semantics: "guarded by the field f of the object with type T in the current state".
We want to support this to avoid false positives.
Reviewed By: peterogithub
Differential Revision: D4197476
fbshipit-source-id: acd00d9
Summary:
The way interfaces are dealt with led to a false positive,
where tryLock() works OK for a Lock but not for a ReentrantLock.
The solution is just to provide the model.
While I am at it I am adding some more standard tests for Lock and ReentrantLock, which were not present.
Reviewed By: sblackshear
Differential Revision: D4204551
fbshipit-source-id: 9b6de28
Summary: These are dangerous if you are trying to compare a type to a string, and they're also unsightly.
Reviewed By: jvillard
Differential Revision: D4189956
fbshipit-source-id: 14ce127
Summary:
Record an abstraction of the bug traces in the tests. The abstraction of a
trace is the sequence of descriptions. In practice, descriptions are either
empty, or of the form "start/end/return from/call to procedure X". They seem
pretty stable.
Motivation: there is nothing testing the traces reported by Infer right now,
even though they are surfaced to developers. For instance, Quandary uses
--issues-txt instead of --issues-tests to make sure the traces do not regress.
This change would make this approach more widespread.
Reviewed By: sblackshear
Differential Revision: D4159597
fbshipit-source-id: 9c83952
Summary: clang has very complicated logic what to translate based on `project_root` and filename. Add tests for different situations in regard of symbolic links in path/project_root
Reviewed By: jvillard
Differential Revision: D4168551
fbshipit-source-id: 586b364
Summary:
`make` doesn't delay variable evaluation in targets' dependencies, so
`$(OBJECTS)` was always empty. Including clang.make after having defined
`OBJECTS` fixes it.
Reviewed By: jberdine
Differential Revision: D4159522
fbshipit-source-id: 6925f8a
Summary: Only run the buck (and ant) tests if the tools can be found at ./configure-time.
Reviewed By: jberdine
Differential Revision: D4167586
fbshipit-source-id: e77b736
Summary:
- rename java.make -> javac.make, config.make -> java.make, and move to infer/tests/ so it's easier to use from infer/tests/build_systems/
- use these from ant's test Makefile, much code reuse!
- factor out common functionality between java and clang
A wrinkle: sorting is now done the same way for --issues-tests and
--issues-txt, which produces bogus (but still as deterministic) sorting for
--issues-txt. This is more of a cosmetic issue, but I hope to fix it in a later
diff that gets rid of calls to `sort` in favour of sorting directly from
`InferPrint`.
Reviewed By: jberdine
Differential Revision: D4166841
fbshipit-source-id: ed6f232
Summary:
Our patch to Javalib has been accepted, so we can parse programs with invokedynamic!
invokedynamic still crashes Sawja, but I have worked around this by replacing all invokedynamic's with invokestatic's before passing them to Sawja.
This means we can handle everything about invokedynamic except calling the correct function (I call a dummy function with the correct signature for now).
We can try to actually call the right method in the future.
Reviewed By: jvillard
Differential Revision: D4160384
fbshipit-source-id: a8ef4e1
Summary:
Instead of the custom filtering done by `InferPrint --issues-tests`, use the
filtering done by `infer` and run without filtering for our e2e tests. We still
test the filtering for our build systems integration tests, and this diff
restores that behaviour for the ant test (hence the bugs removed from
ant/issues.exp).
Also add internal exceptions to most tests to get more signal out of them (eg,
knowing when we add assertion failures and the like).
Retire the old `--issues-tests` to limit the number of ways we do filtering.
Reviewed By: jeremydubreil
Differential Revision: D4131308
fbshipit-source-id: 35805cc
Summary:
This makes our python code work (instead of crashing) when the source file
should be found not from the current directory (or absolute path), eg with
`infer --project-root .. -- clang -c hello.c`.
Reviewed By: jeremydubreil
Differential Revision: D4130802
fbshipit-source-id: 001f72d
Summary: Right now there is no test for compilation database integration. Add one
Reviewed By: jvillard
Differential Revision: D4118769
fbshipit-source-id: 5591de7
Summary:
Time for this framework to die. This converts the ant test to a Makefile. The
design is that each test or family of tests will have its own directory.
Do the necessary plumbing from the toplevel Makefile so that `make test` runs
the migrated tests.
Reviewed By: jberdine
Differential Revision: D4106298
fbshipit-source-id: 7bd694d
Summary:
The build system may expect the assembly commands to run. The only issue with
assembly commands is that we shouldn't attach the plugin to them.
This diff also moves the logic of what to capture to the `Capture.capture`
function to be able to reuse code from Capture. This makes sense because the
Capture module is the one with the knowledge of what to actually capture or
not.
Reviewed By: akotulski
Differential Revision: D4096019
fbshipit-source-id: 7fc99e1
Summary: Make sure that infer ignores the .S file and still finds an issue in `hello.c`
Reviewed By: jvillard
Differential Revision: D4110622
fbshipit-source-id: 32f907e
Summary:
In several places the tests were using whatever 'infer' executable was
found in PATH, instead of the one build from the source to be tested.
Reviewed By: jeremydubreil
Differential Revision: D4065019
fbshipit-source-id: 9b65099
Summary:
Convert the last remaining tests to the new direct format: java harness and crashcontext.
Remove what is left of the old testing infrastructure.
Reviewed By: sblackshear
Differential Revision: D3886355
fbshipit-source-id: 5117868
Summary:
The error code was always 1, and was only enabled in crashcontext mode due to a
typo.
Reviewed By: sblackshear, lazaroclapp
Differential Revision: D3735661
fbshipit-source-id: c0bb0f5
Summary:
Previously, we would translate `throw` with `return`. However, `throw` in
ObjC/C++ is often used to mean "abort". We now translate `throw` the same as
`exit` to prune these paths.
Reviewed By: akotulski
Differential Revision: D3594156
fbshipit-source-id: 81083bb
Summary:
Python needs to know about these because it does different things depending on
whether these flags are passed or not.
Reviewed By: cristianoc
Differential Revision: D3593381
fbshipit-source-id: fe3194d
Summary:
Use the output of `clang -###` to drive which commands to run. Attach the plugin to all commands starting with `-cc1`.
Benefits:
- support for compiling multiple files in one clang command, eg `infer -- clang -c file1.c file2.c`
- support for compile commands that do not target a `.o` file, eg `infer -- clang -S hello.c`
- support for `-cc1` compile commands
- more generally, run all commands that clang would run, and attach plugin in all compilation cases
Reviewed By: martinoluca
Differential Revision: D3366912
fbshipit-source-id: 98d5e3b
Summary:
This removes some boilerplate and duplicated code and makes it easier to add
more tests.
Reviewed By: martinoluca, jeremydubreil
Differential Revision: D3365807
fbshipit-source-id: 9a2e0e5
Summary:
When syntax highlighting the source excerpts that Infer prints on stdout, we
would crash if `pygments.lexers` did not find a suitable class given the name
of the source file. Instead, do not colorize when that's the case.
Reviewed By: martinoluca
Differential Revision: D3358115
fbshipit-source-id: ccb9b41
Summary:
- [python] decode strings coming from `os.*` commands
- [python] decode strings coming from the command-line
- [python] encode a few remaining unicodes into strings
- [java] replace lex/yacc parser for javac verbose output by regex-based matching to handle unicode in paths
- [make] random fix of `make test` to have `make clean test` work
- [integration tests] add e2e build integration tests for utf8 in the PWD
Closes#76
Reviewed By: martinoluca
Differential Revision: D3240809
fb-gh-sync-id: 8c2e1ed
fbshipit-source-id: 8c2e1ed
Jeremy Dubreil
Dulma Churchill
Jules Villard
Sam Blackshear
Tony Hu
Radu Grigore
Dino Distefano
Mehdi Bouaziz
Daiva Naudziuniene
Martino Luca
Jia Chen
azhdar
Andrzej Kotulski
Paco Estevez Garcia
Juergen Hoetzel
Gautam Korlam
Josh Berdine
Cristiano Calcagno
Ryan Rhee
Peter O'Hearn
Lázaro Clapp Jiménez Labora