Summary:
Move Sqlite registered statements inside the functions that use them, since these are only ever used in one place.
Also, reformat some SQL.
Also, make `mark_all_source_files_stale` use an un-prepared statement, as it is used at most once per run, wasting resources if registered.
Reviewed By: skcho
Differential Revision: D23423844
fbshipit-source-id: 07362d19c
Summary: We only added suffix-stripped prefixes of props but this causes FPS if a component declares props that actually contain suffixes since we strip them when we are adding builder calls. The fix is to add both normal and stripped versions.
Reviewed By: skcho, Katalune
Differential Revision: D23375405
fbshipit-source-id: e99cb4dd8
Summary:
This diff finishes the migration from the specialization of methods that take blocks as arguments. Here we delete all the old code and change the way we model dispatch functions so that the tests pass.
- Remove the code for specializing the methods in biabduction.
- Remove the call flags `cf_with_block_parameters` that was only used in this algorithm.
- Removes models for dispatch functions.
- Adds models for dispatch functions as program transformation only in biabduction. To be added in other checkers in the future.
Reviewed By: ngorogiannis
Differential Revision: D23345342
fbshipit-source-id: b5e8542ce
Summary:
This preanalysis in general aims to create specialized clones of methods that have blocks as arguments and that are called with concrete closures, and then call these clone methods instead of the original ones.
One complication is what happens with the captured variables in the closure. What we do is we add them to the formals of the cloned method and passed them through to the concrete blocks.
We do this transformation in two steps:
1. Go through all the callers of methods with blocks as parameters, and create the clone methods. In this preanalysis we only create the attributes for the new method, not the code. We also update the call instructions in the callers to represent a call to the cloned method with updated arguments: we don't need to pass closures arguments anymore, we instead pass the captured variables as new arguments.
2. We add the corresponding code to the newly created clones: this means swapping the call to the block variable with a call to the corresponding block. Moreover, we add some of the new formals (that correspond to the captured variables) to the arguments of the call.
This diff implements step 1 of the analysis. The next diff D23216021 implements step 2.
Reviewed By: ngorogiannis
Differential Revision: D23109204
fbshipit-source-id: 91a5eb16b
Summary: There was a mismatch between formals and actuals in `std::function::operator()` because we were not passing the first argument corresponding to the closure.
Reviewed By: ezgicicek
Differential Revision: D23372104
fbshipit-source-id: d0f9b27d6
Summary: When we evaluate lambdas in pulse, we create a closure object with `fake` fields to store captured variables. However, during the function call we were not linking the captured values from the closure object. We address this missing part here.
Reviewed By: jvillard
Differential Revision: D23316750
fbshipit-source-id: 14751aa58
Summary:
Report errors found by running Topl on top of Pulse, when using
--topl-pulse. Topl tests now run on top of Pulse.
Reviewed By: jvillard
Differential Revision: D23030771
fbshipit-source-id: 8770c2902
Summary:
Two issues are fixed
1. For this diff, when the condition `curr_langauge_is Java` is removed in some part of the analysis, some c bufferoverrun tests are broken. This is fixed in this diff by inspecting if we are dealing with a `Size` alias referring to an `objc_internal_collection_array`.
2. Previously, when we are modifying mutable array in a loop, e.g. adding element to the array or removing element from the array, we are unable to give an estimable size of the array after exiting the loop. This is now fixed, and the corresponding FPs are resolved.
Reviewed By: skcho
Differential Revision: D23342350
fbshipit-source-id: 200f5261c
Summary:
This diff fixes `--reanalyze` option that is to reanalyze specific procedures by removing their
summaries. It was broken because it tried to store an empty summary with `Status.Analyzed`.
Reviewed By: ezgicicek
Differential Revision: D23344633
fbshipit-source-id: 1c4eca6c0
Summary:
The generated code used to contain Prune statements that had boolean
connectives in their conditions. After this commit, all conditions
should have no boolean connective (LNot, LOr, LAnd) at top-level; that
is, prune conditions should be atomic.
The main motivation behind this change is that (a) frontends follow this
convention, and (b) Pulse assumes this convention.
Reviewed By: jvillard
Differential Revision: D23022273
fbshipit-source-id: 1313328e4
Summary:
In the previous diffs, we implement enumerator in order to estimate the cost of for-each loop in ObjC, but when we have FP case when enumerator is used not in for-each loop. For example, the following code has top cost before the fix.
```
void nsarray_enumerator_linear_FP(NSArray* array) {
id obj;
NSInteger sum = 0;
NSEnumerator* enumerator = [array objectEnumerator];
while (obj = [enumerator nextObject]) {
sum += (NSInteger)obj;
}
}
```
Reviewed By: skcho
Differential Revision: D23294895
fbshipit-source-id: 50c7b359f
Summary:
When normalizing discovers new linear arithmetic facts in
`normalize_linear_eqs` we go around once more. Do the same when atoms
become linear equalities.
Reviewed By: skcho
Differential Revision: D23264425
fbshipit-source-id: b355875f3
Summary:
Mostly cosmetic except for a change in [solve_eq] to try harder at
normalization (improves unit tests!). Add more comments and do minor
renamings.
Reviewed By: skcho
Differential Revision: D23243629
fbshipit-source-id: 55bdaf8a8
Summary:
This function had become a bit hard to read and the part about embedded
atoms was not very clear and also a bit incomplete (need to handle "= 1"
and "≠ 1" too).
Reviewed By: skcho
Differential Revision: D23242216
fbshipit-source-id: 239fade97
Summary:
This does a bunch of things at once (sorry):
- Refactor atom/term normalisation so that terms that are really just
atoms become atoms.
- Use this to not bother adding special cases in the functions exported
in the .mli: `and_less_than`, `and_equal_binop`, `prune_binop`, etc.
all had special cases to avoid introducing terms that could be atoms.
That's not great because the same smarts wasn't applied to terms that
would only become atom-like after some normalisation, and led to weird
and duplicated code. Now it's much cleaner: just add the most
straighforward fact and normalise!
- Fix a bug: adding a new equality `x = linear` should *not* be done
using `Normalizer.merge_var_linarith` as this is an internal function
that assumes that `x` is the right representative in `x - linear`.
Instead, for abitrary equations of that form, `solve_eq` should be used.
- When `normalize_linear_eqs` discovers new linear equalities, normalize
again. Add fuel there too to avoid spending too much time doing that.
It could be that we don't need/want fuel there but then we'd need to
think very hard about why there's no infinite recursion possible and
that seems harder.
Reviewed By: skcho
Differential Revision: D23241282
fbshipit-source-id: e5b8c4759
Summary:
This is used for variable substitution and will often be a no-op when
normalising terms over and over again (after the first normalisation,
the expression should stay the same). The equivalent function for terms
was already being careful about not re-allocating identical terms so
extend that care to linear expression.
Reviewed By: skcho
Differential Revision: D23241601
fbshipit-source-id: b365eb87a
Summary:
This allows further normalisation now that terms contain linear
expressions in normal form.
Reviewed By: skcho
Differential Revision: D23241499
fbshipit-source-id: f8e4e759c
Summary:
Linear arithmetic is able to simplify more atoms, eg `x+y <= x+y`
becomes `True` by normalising to "lhs - rhs <= 0". This does the first
step of normalisation, but to get True in this example we also need to
substitute inside atoms according to the linear equalities, which is the
next diff (for now we only substitute variables inside atoms for other
variables or for constants).
Reviewed By: skcho
Differential Revision: D23241457
fbshipit-source-id: 0da0b545c
Summary:
More scaffolding, nothing creates `Linear _` terms yet. Some changes to
variables substitution to allow substituting variables for linear terms
(as well as constants and other variables).
Reviewed By: skcho
Differential Revision: D23241461
fbshipit-source-id: fc870255e
Summary:
This is needed for the rest of the stack that introduces a `Linear of
LinArith.t` variant in `Term.t` to enable more normalisation inside of
terms.
Reviewed By: skcho
Differential Revision: D23241353
fbshipit-source-id: ad765cd13
Summary:
Make term simplification a bit more structured and separate the
"simplification" phase from the "evaluating constant expressions" phase.
Also implement the latter for all possible terms.
Reviewed By: skcho
Differential Revision: D23241334
fbshipit-source-id: 2964aa477
Summary: Not much to see here, extracted to make further changes more readable.
Reviewed By: da319
Differential Revision: D23241335
fbshipit-source-id: 81181f23a
Summary:
`delete` works exactly like `free` so merge both models together. Also
move the `free(0)` test to nullptr.cpp as it seems more appropriate.
Reviewed By: da319
Differential Revision: D23241297
fbshipit-source-id: 20a32ac54
Summary:
Since this is where almost all of the reasoning is concentrated, let's
make sure we use it at every opportunity!
Reviewed By: skcho
Differential Revision: D23194224
fbshipit-source-id: fedb2811e
Summary:
Fix the FP when iterating through constant collection.
facebook
This fix is a hack for now.
Reviewed By: ezgicicek, skcho
Differential Revision: D23241338
fbshipit-source-id: e2e0c05f8
Summary:
As title.
This diff is co-authored by SungKeun Cho and me.
facebook
This diff is co-authored by skcho and me.
Original comments from skcho
"For the record:
1. Rory and I tried to write models for ObjC iterator.
2. We could not use Java's iterator semantics: In Java's, `hasNext` returns the size of collection, rather than a boolean, and which is used as a control variable. On the other hand, in ObjC, it calls only `nextObject`, not calling `hasNext`, and the return value of which is being checked as `null`.
3. We added an artificial field `objc_iterator_offset` to keep the index of the iterator, and the models added in this diff are handling that integer value.
A problem is that `array.objc_iterator_offset` is not included in the control variables, since the condition of the loop is `nextObject() != null` that does not include the iterator offset. We need to make `array.objc_iterator_offset` as a control variable, by changing the part collecting control variables.
"
Reviewed By: ezgicicek, skcho
Differential Revision: D22944278
fbshipit-source-id: 7e71b79c1
Summary:
`Obj.reachable_words` can be very slow on large values, so only call it in debug mode.
Also, measure the time we spend for compressing/storing the global type environment.
Reviewed By: jvillard
Differential Revision: D23264532
fbshipit-source-id: 4a9456ab7
Summary: Use `SqliteUtils.exec` where appropriate, reformat some queries for readability.
Reviewed By: ezgicicek
Differential Revision: D23240945
fbshipit-source-id: 24d921a3a
Summary:
Reset the state before each test so that adding tests doesn't affect
other tests by shifting the ids of their anonymous variables.
Reviewed By: skcho
Differential Revision: D23194171
fbshipit-source-id: 7b717f160
Summary:
Before: 3 modes: (where "lenient" build has warnings not crash the
build, while "strict" build errors on warning):
- opt (default): flambda optimisations + lenient build
- dev (recommand for dev): lenient build, no flambda
- test: strict build (used in tests), no flambda
Now:
- dev (default): *strict* build, no flambda
- opt: lenient build, flambda
- dev-noerror: lenient build, no flambda (use when you want to test
infer but there are build warnings)
The goal is to give faster feedback to infer developers and reduce the
amount of times diffs are sent with build warnings. Also it's now faster
to alternate between changing infer and running unit tests since test
mode is just dev mode.
Reviewed By: ngorogiannis
Differential Revision: D23167416
fbshipit-source-id: d663b6054
Summary: Moving specs to the DB missed out cleaning out all specs when reanalysing. This is the fix.
Reviewed By: jvillard
Differential Revision: D23188958
fbshipit-source-id: 5b50fdda8
Summary:
When install_name_tool fails to patch rpath (and we've seen such cases
in the wild; can happen for many reasons) we better fail the build rather
than ship the binary that will likely fail on start unless a user
happens to have gmp and sqlite dylibs installed.
Reviewed By: skcho
Differential Revision: D23187313
fbshipit-source-id: 83afd0992
Summary:
These are the only ones we need, it turns out the other types (string,
proc names, ...) were dead code. The changes the integer constants to
rational constants, to match the domain of the linear arithmetic engine.
Reviewed By: skcho
Differential Revision: D23164136
fbshipit-source-id: 755c3f526
Summary:
Somehow bash now sees this as `${\#var}`, which is invalid, and fails
rather loudly on my laptop which pollutes the build output. Removing
`\` breaks other platforms.
So, switch to using `wc -m` to count the number of characters.
Reviewed By: ngorogiannis
Differential Revision: D23187505
fbshipit-source-id: a22cc0fe5
Ezgi Çiçek
Nikos Gorogiannis
Dulma Churchill
Daiva Naudziuniene
Qianyi Shu
Radu Grigore
Sungkeun Cho
Jules Villard
Artem Pianykh