Summary:
Instead of the custom filtering done by `InferPrint --issues-tests`, use the
filtering done by `infer` and run without filtering for our e2e tests. We still
test the filtering for our build systems integration tests, and this diff
restores that behaviour for the ant test (hence the bugs removed from
ant/issues.exp).
Also add internal exceptions to most tests to get more signal out of them (eg,
knowing when we add assertion failures and the like).
Retire the old `--issues-tests` to limit the number of ways we do filtering.
Reviewed By: jeremydubreil
Differential Revision: D4131308
fbshipit-source-id: 35805cc
Summary:
Our default strategy for handling unknown code is to propagate taint from the actuals to the return value.
But for commonly-used methods like `StringBuilder.append` (used every time you do `+` with a string in Java), this doesn't work.
The taint should be propagated to both the receiver and the return value in these cases.
I'm considering a solution where we always propagate taint to the receiver of unknown functions in the future, but I am concerned about the performance.
So let's stick with a few special string cases for now.
Reviewed By: cristianoc
Differential Revision: D4124355
fbshipit-source-id: 5b2a232
Summary: A must-have for reporting taint errors and any other interprocedural error where the trace is sufficiently complex.
Reviewed By: jvillard
Differential Revision: D4124072
fbshipit-source-id: 26b3b2b
Summary: A must-have for reporting taint errors and any other interprocedural error where the trace is sufficiently complex.
Reviewed By: jvillard
Differential Revision: D4106352
fbshipit-source-id: b2677e6
Summary: We want to skip readwrite locks for now, maybe report on their misuses later.
Reviewed By: sblackshear
Differential Revision: D4110998
fbshipit-source-id: 986f77e
Summary:
Previously, we recorded direct sinks as sinks and transitive sinks as passthroughs. This makes it difficult to create an expanded interprocedural trace when recording an error because we can't distinguish between sinks (which we want to expand) and passthroughs (which we don't). This diff changes recording of sinks so that a sink is now the *last* function in a trace to call a sink. To find out what the original sink was, the summary for the transitive sink in the trace will now need to be (recursively) expanded until we bottom out in the original sink.
Will do the same for sources in a follow-up diff.
Reviewed By: cristianoc
Differential Revision: D4103759
fbshipit-source-id: 6f435f5
Summary:
Needed to support upcoming diff(s) that change the nature of sources/sinks in a trace. Today they are the *original* source/sink, but in the future they will be the *transitive* source/sink (last procedure to return a source/call a sink).
This new convention will make the `returnAllSources`/`callAllSinks` form of these tests not so useful, since `returnAllSources`/`callAllSinks` will now show up as a single source/sink in the trace (at least without expanding the trace). By making these tests intraprocedural, we can make sure that we're still testing everything that we want to.
Reviewed By: cristianoc
Differential Revision: D4103754
fbshipit-source-id: 1733ecf
Summary:
See code comment about `throw exn` being translated as `return exn`.
This problem was revealed by D4081279, which started grabbing access paths from exceptions.
Reviewed By: jvillard
Differential Revision: D4096391
fbshipit-source-id: 9d91513
Summary: Doing `sychronized(A.class)` where `A` is an inner class was not previously recognized by the `GuardedBy` checker.
Reviewed By: peterogithub
Differential Revision: D4095094
fbshipit-source-id: c832f9e
Summary:
We issue a thread safety warning on a class not
marked ThreadSafe, when it has a super that is. This makes some sense. But,
it will be nice to remind that a super is so maeked, else the mesg could
seem out of context or surprising
Reviewed By: sblackshear
Differential Revision: D4075145
fbshipit-source-id: ebc2b83
Summary:
This diff revises the makefiles for java tests so that they are based on
the files actually produced and depended on, instead of the existing
imperative style. This is, I think, clearer and easier to modify, and
enables a little more parallelism.
Reviewed By: jvillard
Differential Revision: D4072560
fbshipit-source-id: c16d4bd
Summary:
Right now, taint gets lost if it flows into a constructor or procedure whose implementation is missing.
Since the core Java (e.g., String) and Android classes (e.g, Intent) are among these, this is bad.
We could handle this by writing a bunch of models instead, but that would be a lot of work (plus we may still miss cases).
Reviewed By: jvillard
Differential Revision: D4051591
fbshipit-source-id: 65851c8
Summary:
Before, if I wrote code like
```
x = src()
sink(x)
sink(x)
```
we would report three times instead of two.
The first flow would be double-reported.
Reviewed By: jeremydubreil
Differential Revision: D4024678
fbshipit-source-id: fcd5b30
Summary: when a method has writes to a field outside of synchrnoization, issue an appropriate error message identifying the fields
Reviewed By: sblackshear
Differential Revision: D4015612
fbshipit-source-id: 4f697fc
Summary:
This changes the algorithm for pure join to keep the constraints that,
after normalization, occur in both arguments. Previously pure join
would normalize, filter, and then union the constraints of the
arguments.
Reviewed By: sblackshear
Differential Revision: D3970394
fbshipit-source-id: 3dc1672
Summary:
Add a test case for a problem peterogithub uncovered with join of
attributes. The expected result is currently incorrect, to be fixed
later.
Reviewed By: sblackshear
Differential Revision: D3970363
fbshipit-source-id: 077705d
Summary:
We were previously leaking the passthroughs of the callee into the caller.
We definitely don't want to do this since it could make the summaries higher up in the call stack explode.
If we need to know the passthroughs of a callee, we can always read them from the callee's summary.
Reviewed By: jeremydubreil
Differential Revision: D3972679
fbshipit-source-id: 5b5903f
Summary: The Infer builtins can be used in the e2e tests, but those tests should not depend on the Infer models to avoid cyclic dependencies. This diff separates the models and the Infer builtins in two directories so that the test can depend on the builtins without depending on the models
Reviewed By: sblackshear
Differential Revision: D3929478
fbshipit-source-id: 7d0ab79
Summary:
Convert the last remaining tests to the new direct format: java harness and crashcontext.
Remove what is left of the old testing infrastructure.
Reviewed By: sblackshear
Differential Revision: D3886355
fbshipit-source-id: 5117868
Summary:
For tests that have reports of the form `<file>:<line>*`, sort first by
file, then by line numerically.
Reviewed By: sblackshear
Differential Revision: D3828044
fbshipit-source-id: d10cffe
Summary:
This diff converts the Eradicate and Checkers tests to the new direct test format, which does not rely on buck or junit.
A self-contained Makefile is used to compile and analyze the test files, including all the dependencies, and a special option in InferPrint is used to produce a file of expected results `issues.exp`, which is checked into the repository.
Having an explicit Makefile makes it easy to edit and compile one set of test files in isolation, to investigate test failures, do debugging, etc.
A bunch of boilerplate code is removed. For example, the single file of expected results `issues.exp` replaces the 1.5K LOC in `endtoend/java/eradicate`.
Reviewed By: jvillard
Differential Revision: D3764632
fbshipit-source-id: 6c68ab8
Summary:
Part of the migration of .inferconfig-specific options into options accepted
both by .inferconfig and the CLI.
Reviewed By: jberdine
Differential Revision: D3304783
fbshipit-source-id: 4a7ee6f
Summary:
The philosophy of the tracing mode reporting is to not report the errors in a method if reaching this error does depend on information that can be false at call site. Typically with:
void foo(Object obj, int x) {
if (x == 3) {
obj.toString();
}
}
it may be that we always call `foo` with a non-null parameter or `x != 3`.
Thechnically, the reporting code matches the pairs of the form (precondition, error) and filtering out the cases where the precondtions was not imposing constraints on the calling context, and report the other cases. So the NPE could be reported in the following case:
void bar() {
foo(null, 3);
}
However, we were missing the case where there was anyway no way to call a method in a safe way, i.e. all the preconditions were of the form: (precondition, error), for example:
void baz(boolean b) {
if (b) {
foo(null, 3);
} else {
foo(null, 3);
}
}
In that case, the summary is of the form
PRE (1): b = false
POST: NullPointerException
PRE (2): b = true
POST: NullPointerException
In which case it is legit to report `NullPointerException` in `baz`.
Reviewed By: sblackshear, jberdine
Differential Revision: D3220501
fb-gh-sync-id: 7fb7d70
fbshipit-source-id: 7fb7d70
Summary: Example of dynamic dispatch with interfaces were already working. Adding some tests now so that we don't break this.
Reviewed By: sblackshear
Differential Revision: D3220360
fb-gh-sync-id: 11395dd
fbshipit-source-id: 11395dd
Summary: For performance critical sections of the code, this checker detects memory allocations or calls to methods annotated as expensive. However, such cases of memory allocations or expensive calls are acceptable is occuring in rare cases. This diff adds supports for the "unlikely" branch prediction method and does not track expensive calls in unlikely branches.
Reviewed By: sblackshear
Differential Revision: D3193473
fb-gh-sync-id: ea87e49
fbshipit-source-id: ea87e49
Summary:public
The code:
DataInputStream in = new DataInputStream(new BufferedInputStream(new FileInputStream(file)));
creates a resource with `FileInputStream()` and wraps it twice as a field of `BufferedInputStream` and then as a field of `DataInputStream`. Then calling:
in.close();
needs to go down the wrappers hierachy: `DataInputStream.close()` -> `FilterInputStream.close()` which then calls `BufferedInputStream.close()` -> `FilterInputStream.close()` -> `FileInputStream.close()`.
Going down the wrapper was not working before because `FilterInputStream.close()` was only going further when the type of field `in` was `FileInputStream` wheras it should also continue when the type of the field is any subtype of `FilterInputStream`, e.g. `DataInputStream` and `BufferedInputStream` like in the test example. This diff fixes this last aspect.
Reviewed By: sblackshear
Differential Revision: D3174822
fb-gh-sync-id: 3adbb7e
fbshipit-source-id: 3adbb7e
Peter O'Hearn
Jules Villard
Sam Blackshear
Josh Berdine
Andrzej Kotulski
Jeremy Dubreil
Cristiano Calcagno
Lázaro Clapp Jiménez Labora