Summary: In every place this was used except one, `debug_mode` is also used as a gate.
Reviewed By: jeremydubreil
Differential Revision: D6450913
fbshipit-source-id: 6a5716d
Summary:
On spinning disks the performance of commits are worse when `synchronous=NORMAL`.
Reading the documentation of SQLite, when `synchronous=OFF` there's a risk of DB corruption when the operating system crashes or the computer loses power before that data has been written to the disk surface; on the other hand, a crash in Infer should keep data in the DB in a sound state.
Buck reached the same conclusions too: 4680162279
Reviewed By: mbouaziz
Differential Revision: D6413384
fbshipit-source-id: 99e4650
Summary:
This is a good moment to close Sqlite's DB handles, and in general can be used to postpone some actions right before infer terminates.
Since exiting is done via uncaught exception handling, the `late_epilogue` callback will run at the very end, even after all the `at_exit` callbacks have been invoked. The only exception is made in case of signalling, in which case the `late_epilogue` is still invoked, but before any of the `at_exit` callbacks.
Reviewed By: jvillard
Differential Revision: D6404961
fbshipit-source-id: 8ff7a05
Summary:
- Plug model checkers
- Add alloc size safety condition on alloc of negative, zero or big size
Reviewed By: sblackshear
Differential Revision: D6375144
fbshipit-source-id: bbea6f3
Summary: There is a lot of code to create LaTeX output of the Infer datastructures, but this does not seem to be used anymore.
Reviewed By: jvillard
Differential Revision: D6355686
fbshipit-source-id: 55de8e9
Summary: This option was for compatibility with the command line options of the previous, but is no longer used. This diff removes the option and the deprecated code.
Reviewed By: sblackshear, mbouaziz
Differential Revision: D6351097
fbshipit-source-id: 0e4cfc5
Summary: This will avoid confusions when running `-a infer --racerd` which would silently not running RacerD before this diff.
Reviewed By: sblackshear
Differential Revision: D6374139
fbshipit-source-id: 2cb5004
Summary:
Naming a variable `_foo` makes the compiler not warn about them if they are
unused, but there are lots of instances of such variables in the code where
they are in fact used, defeating the warning and introducing confusion for
those used to this naming convention.
Basically `sed -i -e "s/ _\([a-zA-Z][a-zA-Z0-9_']*\)/ \1_/g" **/*.ml` followed
by manual fixing of compilation errors (lots of `compare__foo` ->
`compare_foo_`).
Reviewed By: mbouaziz
Differential Revision: D6358837
fbshipit-source-id: 7ffb4ac
Summary:
To resole #797 this adds runtime option to select VFS for SQLite,
When infer runs on WSL this defaults to "unix-excl" (https://sqlite.org/vfs.html) and if VFS is specified, then WAL is not enabled (since WAL is non compatible with custom VFS - https://www.sqlite.org/wal.html).
Closes https://github.com/facebook/infer/pull/798
Reviewed By: jvillard
Differential Revision: D6335037
Pulled By: dulmarod
fbshipit-source-id: d9b9a58
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
This diff takes the first step toward a more general filtering
system. This step is concerned only with filtering at the reporting
stage, filtering for the capture and analysis stages is left for
later.
This diff adds a new command line / config option
```
--filter-report +string
Specify a filter for issues to report. If multiple filters are
specified, they are applied in the order in which they are
specified. Each filter is applied to each issue detected, and only
issues which are accepted by all filters are reported. Each filter
is of the form:
`<issue_type_regex>:<filename_regex>:<reason_string>`. The first
two components are OCaml Str regular expressions, with an optional
`!` character prefix. If a regex has a `!` prefix, the polarity is
inverted, and the filter becomes a "blacklist" instead of a
"whitelist". Each filter is interpreted as an implication: an issue
matches if it does not match the `issue_type_regex` or if it does
match the `filename_regex`. The filenames that are tested by the
regex are relative to the `--project-root` directory. The
`<reason_string>` is a non-empty string used to explain why the
issue was filtered.
See also infer-report(1) and infer-run(1).
```
Reviewed By: jvillard
Differential Revision: D6182486
fbshipit-source-id: 9d3922b
Summary:
Use a distinct issue type for the Java and C++ concurrency analyses,
as the properties they are checking are significantly different.
Reviewed By: sblackshear
Differential Revision: D6151682
fbshipit-source-id: 00e00eb
Summary:
:
Make both buck capture and compilation database handle buck command line arguments and invoke buck query the same way.
Plus allow:
- target patterns `//some/dir:` and `//some/dir/...`. However since `//some/dir:#flavor` and `//some/dir/...#flavor` are not supported, they need to be expanded before adding the infer flavor.
- target aliases (defined in `.buckconfig`)
- shortcuts `//some/dir` rewritten to `//some/dir:dir`
- relative path `some/dir:name` rewritten to `//some/dir:name`
Reviewed By: jvillard
Differential Revision: D5321087
fbshipit-source-id: 48876d4
Summary:
Linters are now considered a "checker", like backend checkers. This makes, eg,
`--racerd-only` disable the linters, which is more intuitive.
We can now express `-a linters` and `--clang-frontend-action` in terms of these
two new options. For instance, `-a linters --clang-frontend-action lint` is the
same as `--linters-only --no-capture`.
This is another step in the direction of getting rid of `--analyzers`.
Reviewed By: dulmarod
Differential Revision: D6147387
fbshipit-source-id: 53622b2
Summary: A stepping stone to have descriptive issue types for each kind of flow rather that lumping everything into `QUANDARY_TAINT_ERROR`.
Reviewed By: mbouaziz
Differential Revision: D6126690
fbshipit-source-id: a7230c0
Summary: This check is deprecated and will be replaced by a dedicated checker to detect unitialized values.
Reviewed By: mbouaziz
Differential Revision: D6133108
fbshipit-source-id: 1c0e9ac
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Buck reads the version on stderr or, very recently, from either stdout or stderr.
This makes infer output the version of stderr when called from Buck or invoked as javac, and on stdout otherwise.
Reviewed By: martinoluca
Differential Revision: D6098392
fbshipit-source-id: 23f1d5a
Summary: This makes `--biabduction-blacklist-path-regex` and others work as expected.
Reviewed By: mbouaziz
Differential Revision: D6088625
fbshipit-source-id: 8f1daa3
Summary:
This is a better default than running the biabduction analysis only, now that
we have several mature checkers.
Reviewed By: jeremydubreil
Differential Revision: D6051186
fbshipit-source-id: 04ac0c6
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
This is useful if some command behaves like one infer knows how to integrate with. For instance:
```
infer --force-integration clang -- clang-3.8 -c examples/hello.c
```
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D6051589
fbshipit-source-id: dd693b0
Summary: The order of the elements in the list maters since the function `string_to_analyzer` will return the fist element found in the list. Inverting the `"biabduction"` and `"infer"` entries in the list allows D6051146 to have no functional implications.
Reviewed By: sblackshear
Differential Revision: D6055840
fbshipit-source-id: 6cf5ac2
Summary:
One day `-a infer` will alias `-a checkers` so for now create another, more
explicit analyzer name that can be used to migrate progressively. For instance,
after this commit what should continue to use `-a biabduction` can change to
that, so that when `-a infer` becomes an alias to `-a checkers` it can keep
working.
Reviewed By: jeremydubreil
Differential Revision: D6051146
fbshipit-source-id: 1ef4c34
Summary:
This generates `--resource-leak-only` automatically, and make the other
checkers' `-only` option work as expected with respect to `--resource-leak` too
(eg, `--resource-leak --biabduction-only` disables resource leak).
Reviewed By: jeremydubreil
Differential Revision: D6051134
fbshipit-source-id: 2d4a2ba
Summary:
1. Mark some Makefile targets as depending on `MAKEFILE_LIST` so they get rebuilt on Makefile changes
2. Do not show boolean options with no documentation in the man pages (like we do for other option types).
3. Default to Lazy dynamic dispatch for the checkers.
4. In the tests, use `--<checker>-only` instead of relying on `--no-default-checkers`
5. `--no-filtering` is redundant if `--debug-exceptions` is passed
Reviewed By: jeremydubreil
Differential Revision: D6030578
fbshipit-source-id: 3320f0a
Summary:
Another step toward running the biabduction analysis as a checker.
Depends on D6038210
Reviewed By: jvillard
Differential Revision: D6038682
fbshipit-source-id: fed45bf
Summary:
This is to avoid getting BUSY from sqlite when the machine is busy (not
necessarily busy because of infer).
Reviewed By: jberdine
Differential Revision: D6020022
fbshipit-source-id: ca0f913
Summary:
Attempting to translate these will not go well as the declaration still depends
on some template arguments. Added a test that was previously crashing the
frontend.
Also extend the catching of "Unimplemented" and other errors to `translate_one_decl` as it was useful to debug this issue. In particular, reraise all exceptions and log some additional context when doing so.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5976357
fbshipit-source-id: fca8e38
Summary:
Running `infer report foo.specs` would overwrite report.json with an empty json.
Only recompute report.json when running `infer-analyze` or `infer-run`.
Reviewed By: mbouaziz
Differential Revision: D5963500
fbshipit-source-id: e579c6f
Summary:
Use a monotonic time source instead.
Also, sleep between retries in the Serialization code.
Reviewed By: jberdine
Differential Revision: D5941697
fbshipit-source-id: 05efbe1
Summary:
Despite what the sqlite manual says, it looks like it's possible for sqlite not
to remove the -shm and -wal files after a successful termination.
Close the database and clean them up in Buck mode so that they do not perturb
the cache.
Reviewed By: martinoluca
Differential Revision: D5953967
fbshipit-source-id: 9068b01
Summary: If we know for sure we won't need to store an attribute in the DB, there's no need to compute its marshalled value.
Reviewed By: jberdine
Differential Revision: D5891050
fbshipit-source-id: cf4534e
Summary:
This adds more structure to the SQL schema backing attributes. With that, we
can transfer the logic for updating attributes in SQLite, instead of doing
optimistic concurrency in the client.
Reviewed By: jberdine
Differential Revision: D5891038
fbshipit-source-id: 6577ba2
Summary:
- use a similar key as for specs in the attributes table
- cache blob computations
- this improves memory usage a lot
Reviewed By: mbouaziz
Differential Revision: D5824177
fbshipit-source-id: c318577
Summary:
Preparing statements allocates memory and is generally best done once and for all.
We need to re-prepare statements when opening a new DB connexion (after each fork).
Reviewed By: mbouaziz
Differential Revision: D5824157
fbshipit-source-id: 4d239ac
Summary: Not sure if useful but seems sensible. It disappears at the top of the stack when we do merging in SQL.
Reviewed By: mbouaziz
Differential Revision: D5824131
fbshipit-source-id: fd64752
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
`reraise` was error-prone when one forgot to save the backtrace between where the exception is caught and where it is reraised.
If any exception was raised (even caught) in between, the printed backtrace would be the one of the last exception thrown and it would be very confusing.
This diff kills `reraise` and introduces `reraise_after exn ~f` and `reraise_if exn ~f` to be used right after catching the exception.
Also turned some of them to the common pattern `try_finally ~f ~finally`.
Reviewed By: jvillard
Differential Revision: D5911244
fbshipit-source-id: 9883d1e
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary: Parmap delivers a better scheduling, which works as a pipeline, as opposed to what existed before, which schedules processes in batches.
Reviewed By: jvillard
Differential Revision: D5678661
fbshipit-source-id: a632c71
Summary:
We need to make sure that destructors of virtual base classes are called only once. Similarly to what clang does, we have two destructors for a class: a destructor wrapper and an inner destructor.
Destructor wrapper is called from outside, i.e., when variables go out of scope or when destructors of fields are being called.
Destructor wrappers have calls to inner destructors of all virtual base classes in the inheritance as their bodies.
Inner destructors have destructor bodies and calls to destructor wrappers of fields and inner destructors of non-virtual base classes.
Reviewed By: dulmarod
Differential Revision: D5834555
fbshipit-source-id: 51db238
Summary:
The clang frontend uses `assert false` for unimplemented features that should
abort method translations, as well as for genuine internal errors.
Distinguishing between the two, we can fail hard on the latter and not the
former.
1. This introduces a new exception `Unimplemented` that is used instead of `assert false` where appropriate.
2. Changed some other cases into `die ...` (when there's an error message to display)
3. Wherever a path in the code that we assumed to be unreachable was observed reachable, we now raise `IncorrectAssumption`. These should be fixed, but the fixes are not obvious.
Reviewed By: sblackshear
Differential Revision: D5784384
fbshipit-source-id: 61b55af
Summary: This will run infer with `--no-keep-going` by default in our tests.
Reviewed By: sblackshear
Differential Revision: D5814237
fbshipit-source-id: c1e1a4e
Summary:
"Running as clang" was its own infer subcommand. That's not terribly good
because it makes it hard to specify another subcommand, and in particular it
broke the `compile` subcommand in some integrations because "running as clang"
would always do capture. The cmake tests required to run with `--keep-going`
because of this.
Instead of having its own fake subcommand, simply add a new boolean in the
config for "infer runs as clang", as we do for javac already (used in the mvn
integration).
Also make logging of the environment better.
Reviewed By: jberdine
Differential Revision: D5813986
fbshipit-source-id: 72b96cd
Summary: I often find myself needing a generic `Pp.seq` where I can specify the separator.
Reviewed By: jeremydubreil
Differential Revision: D5803915
fbshipit-source-id: fb8d30d
Summary: Try to preserve the original backtrace. Introduce `reraise` in the global namespace.
Reviewed By: jberdine
Differential Revision: D5804121
fbshipit-source-id: 0947a47
Summary:
This makes it much easier to read infer logs coming from these subprocesses
that use a sub-results dir.
Reviewed By: jberdine
Differential Revision: D5777783
fbshipit-source-id: f074536
Summary: With Logging.exit you have more control of the code that invokes exit, for example when forking and running certain functions that may in turn invoke exit, and you want to handle the execution flow differently - like invoking certain callbacks before exiting, or not exiting at all.
Reviewed By: jvillard
Differential Revision: D5746914
fbshipit-source-id: 596fba1
Summary:
Calling `Exn.backtrace` doesn't give us the current backtrace, only the one of
the latest exception raised. Change the logic of toplevel exception catching to
print the right backtrace.
Also, do not use `Format` to print from `Config` as `Logging` may have messed
with it already.
Finally, throw in some colours!
Reviewed By: jberdine
Differential Revision: D5764825
fbshipit-source-id: cd51688
Summary: This appears to be interchangeable with `Config.debug`, so let's kill it.
Reviewed By: jvillard
Differential Revision: D5742685
fbshipit-source-id: d390b6b
Summary: This adds an option to only translate the body of a method when the file matches the give pattern. This is especially intended to be use for generated files.
Reviewed By: jvillard
Differential Revision: D5729120
fbshipit-source-id: 1e28469
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary: In case of syntax errors in AL files, stdout will contain a JSON list with all files affected by the errors, including info like filename and line number.
Reviewed By: dulmarod, jvillard
Differential Revision: D5640272
fbshipit-source-id: 569b16d
Summary:
Saw these two types of errors before (but they're hard to reproduce locally) when building the models:
- `ERROR: Zip.Error("/mnt/btrfs/trunk-git-infer-739-1503054473/infer/bin/../lib/java/models.jar", "", "end of central directory not found, not a ZIP file")`. I think this means infer reads a partially-written models jar. We shouldn't try to load this in models mode.
- `install` would complain that the destination already exists. I think this can only happen if there's a race and the file gets created between when install first checks and when it tries to write to it.
This made me realise that the some of the models are computed in C and C++ mode
and we pick one computed spec arbitrarily. That sounds a bit dodgy but at least
now we do so in a non-racy way.
Reviewed By: jeremydubreil
Differential Revision: D5658389
fbshipit-source-id: 8077279
Summary: Also, stop trying to delete directories that do not exist: "sources" and "filelists".
Reviewed By: mbouaziz
Differential Revision: D5658089
fbshipit-source-id: e1cdb13
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
This gives additional information to users. For instance:
```
--biabduction
Activates: the separation logic based bi-abduction analysis using
the checkers framework (Conversely: --no-biabduction)
This option is relevant to infer-analyze(1).
```
Reviewed By: sblackshear
Differential Revision: D5583197
fbshipit-source-id: 2960b90
Summary:
This makes it easier to test a single checker.
Also refactor the code to make it harder to mess up the list of default/all checkers.
Reviewed By: sblackshear
Differential Revision: D5583209
fbshipit-source-id: 7c919b2
Summary:
This makes the CLI more complete: before, it was often impossible to "go back"
once some options were passed, namely options produced by `mk_*_{list,opt}`.
Now these automatically create an accompanying `--<long>-reset` option that
resets the config variable to its default value.
Also unify our naming of `~meta` arguments:
- no more spaces in them (except one instance where it's a whole sentence)
- use `+foo` if `foo` can be specified multiple times
Reviewed By: dulmarod
Differential Revision: D5583187
fbshipit-source-id: a8c2567
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
This allows the user to specify a different command to build the current version of the project vs to build the previous version of the project. Here's an example:
```
infer diff --gen-previous-build-command-script "echo clang -c hello.c" ... -- clang -c hello2.c
```
By default the two build commands are the same. If the script is to be used for both the current and the previous versions, then it's on the user to run it once first, eg:
```
infer diff --gen-previous-build-command-script "./myscript.sh previous" ... -- $(./myscript.sh current)
```
Reviewed By: martinoluca
Differential Revision: D5500989
fbshipit-source-id: 7374b44
Summary:
The Eradicate `Nullable` checker should now be run using:
infer -a checkers --eradicate ...
Reviewed By: mbouaziz
Differential Revision: D5529226
fbshipit-source-id: 0de2956
Summary: D5526683 assumed that this was the case, and broke the report hook.
Reviewed By: martinoluca
Differential Revision: D5527353
fbshipit-source-id: 2e169b9
Summary: Automatically set --reactive because the diff analysis will be faster that way.
Reviewed By: jeremydubreil
Differential Revision: D5499443
fbshipit-source-id: 1a35cee
Summary: The `--failures-allowed` was doing for the Clang frontend what `--keep-doing` was doing for the backend. This revision merges the two options to simplify the Infer CLI and our tests.
Reviewed By: jvillard
Differential Revision: D5474347
fbshipit-source-id: 09bcea4
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary: Because making a diff which breaks the tests because it silently fails to create the right posts for the models is notoriously hard to debug
Reviewed By: sblackshear
Differential Revision: D5471611
fbshipit-source-id: ef04539
Summary:
Pretty basic: warn when we see an assignment instruction `x = ...` and `x` is not live in the post of the instruction.
Only enabled for Clang at the moment because linters already warn on this for Java. But we can enable it later if we want to (should be fully generic).
Reviewed By: jeremydubreil
Differential Revision: D5450439
fbshipit-source-id: 693514c
Summary:
oops_house
This was introduced when upgrading Core, as `Unix.readdir` became deprecated in
favour of `Unix.readdir_opt` but the exception-based logic was left unchanged.
Reviewed By: mbouaziz
Differential Revision: D5461353
fbshipit-source-id: c0994c3
Summary: Long lists will be broken into lines rather than stretch out on a single line.
Reviewed By: jvillard
Differential Revision: D5424323
fbshipit-source-id: 115f16a
Summary: Changing .inferconfig can change the analysis results, so we want the cache to get invalidated when .inferconfig changes.
Reviewed By: jeremydubreil
Differential Revision: D5419734
fbshipit-source-id: 01ad874
Summary: This way, if infer crashes then the log files will be available for inspection, but if it succeeds we still get rid of the (non-deterministic) logs before Buck caches the results.
Reviewed By: sblackshear
Differential Revision: D5416032
fbshipit-source-id: 22e58be
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Allowing the user to configure where to store the JSON report is asking for
trouble. In fact, some places in the code hardcoded "results.json" anyway.
Someone wanting to have results.json somewhere else can still copy report.json
once infer has run.
Reviewed By: jberdine
Differential Revision: D5415079
fbshipit-source-id: 9439cb6
Summary: Introduce `Logging.die` to try and exit with consistent error codes depending on what failed.
Reviewed By: mbouaziz
Differential Revision: D5406642
fbshipit-source-id: 25d98fc
Summary: This will allow us to gradually get rid of the exceptions thrown during the analysis while detecting the regressions earlier
Reviewed By: jberdine, jvillard
Differential Revision: D5385154
fbshipit-source-id: 605e3f5
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary:
Error'ing when getting several subcommands on the command line only makes sense
when the user typed these options herself. This was causing a bug in the Gradle
integration, and possibly others (see GitHub issue).
Fixes#668
Reviewed By: jeremydubreil
Differential Revision: D5381850
fbshipit-source-id: f332377
Summary: This is useful when we only want to examine the html for some but not all source files.
Reviewed By: jvillard
Differential Revision: D5334786
fbshipit-source-id: 774c23c
Jules Villard
Sam Blackshear
Dulma Churchill
Martino Luca
Mehdi Bouaziz
Jeremy Dubreil
vsilyaev@broadcom.com
Josh Berdine
Dino Distefano
Daiva Naudziuniene
Jia Chen
Radu Grigore