Summary: In C++ there are types that contain `<>` in their names (templates). When printing type to `html` those should be escaped
Reviewed By: jeremydubreil
Differential Revision: D4572506
fbshipit-source-id: a180537
Summary: This fixes a wrong level of indirection when performing the type substitution.
Reviewed By: sblackshear
Differential Revision: D4521008
fbshipit-source-id: 7324ea6
Summary: Being forced to separately define `pp_element`/`pp_key` is uneccessary and makes it more cumbersome to create a set/map from an existing module that already defines `pp`.
Reviewed By: jeremydubreil
Differential Revision: D4517308
fbshipit-source-id: 9b17c9c
Summary: This should fix the issue with broken invariants when the method specialization on pointer ends up doing a substitution on non pointer types
Reviewed By: sblackshear
Differential Revision: D4487232
fbshipit-source-id: f3fce84
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Summary:
Races on volatile fields are less concerning than races on non-volatile fields because at least the read/write won't result in garbage.
For now, let's de-prioritize these writes by ignoring them.
Reviewed By: peterogithub
Differential Revision: D4434023
fbshipit-source-id: 05043ba
Summary:
Make the html output available to checkers when -g is used on the command-line.
A checker needs to call a function to start and finish the processing of each node,
and add prints during the processing.
This diff illustrates the case for Eradicate, by adding printing of the pre-state
and post-states.
Reviewed By: sblackshear
Differential Revision: D4421379
fbshipit-source-id: 67501ba
Summary: The logic for filtering reports based on their buckets lives in InferPrint, so this code isn't doing anything.
Reviewed By: jvillard
Differential Revision: D4379966
fbshipit-source-id: 5a69304
Summary: Adding the information that a procedure has been modelled as part of the attributes, during the translation, instead of getting this information from where is the summary loaded from. This is more consistent with the use of the attributes in other parts of the analysis, but is also useful in the context of the lazy dynamic dispatch algorithm where the procedures, including the models, are cloned and reanalyzed with more specialized parameters. The information about whether a procedure is a model must persist when cloning the procedures.
Reviewed By: sblackshear
Differential Revision: D4356892
fbshipit-source-id: 40ff5ca
Summary:
The two concepts are not negation of each other. The type environment created by the different frontends is not guaranteed to contain a full view of the type hierarchy. In this case, there can be holes preventing Infer to prove that `t <: t'` if the type definition between `t` and `t'` is missing. There are now two functions:
# `is_known_subtype` when the subtyping relation can be proven
# `is_known_not_subtype` when it can be proven that there is no subtyping relation between two types
This diff is intended to make no functional changes but to add functionality to detect cast error angelically, i.e. assuming that the program is probably fine where there is not enough information to prove the cast error.
Reviewed By: jberdine
Differential Revision: D4345803
fbshipit-source-id: 39b79bc
Summary:
The specialization of the methods based on the type of the arguments should only be performed when the type is an object type. This should in theory be always the case according to the Java semantics but the previous version of the code was relying on Infer to be correct all the way down the the method call:
Before this diff, the analysis on examples like this:
String foo(Object object) {
object.toString();
}
String bar() {
int[] array = {1, 2, 3};
foo(array);
}
This is a legit code that Infer is getting wrong because Java objects are translated as C objects instead of objects containing a C-style object. There may be other issues like this so it is safer to filter out the types when performing the substitution.
Reviewed By: jberdine
Differential Revision: D4345760
fbshipit-source-id: 1c74593
Summary: pattern matching we had before allowed many unintended functions to pass (such as `max_element`). Make matching much more strict
Reviewed By: jvillard
Differential Revision: D4313428
fbshipit-source-id: 189c522
Summary:
Most of the time code outside of project root is not interesting to the user - it's either system library or infer C++ model. Skip all of them.
Previous logic was doing something similar, but in more selective way.
I also need this change for D4313428
Reviewed By: jvillard
Differential Revision: D4339298
fbshipit-source-id: c7b5544
Summary:
This will simplify the InferPrint logic of checking what should/should-not be reported.
I will remove the issue names in Localise in a next diff.
Reviewed By: ddino
Differential Revision: D4334327
fbshipit-source-id: ebcfd6c
Summary:
We've had some issues with names like `arr$` appearing in error reports.
Any identifier name that contains $ cannot have come from source code because it is not a legal Java identifier.
This change should stop these reports because Errdesc.ml refuses to use temporary var names in error reports.
Reviewed By: jeremydubreil
Differential Revision: D4322305
fbshipit-source-id: 16237fe
Summary: Allow backend to trigger compilation of extra files when it needs them. This will allow infer to capture less files initally and possibly speed up compilation
Reviewed By: cristianoc, jberdine
Differential Revision: D4231581
fbshipit-source-id: 181abea
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary: Globals that are constexpr-initializable do not participate in SIOF.
Reviewed By: sblackshear
Differential Revision: D4277216
fbshipit-source-id: fd601c8
Summary:
Functions related to source files were already namespaced by `source_file_` prefix. Make separate module for them.
In high level it replaces all `source_file_` with `SourceFile.` and then fixes all remaining compilation errors
Reviewed By: jvillard
Differential Revision: D4299053
fbshipit-source-id: 20b1d39
Summary: This is very useful to debug issues that have to do with types, for example the cast errors
Reviewed By: sblackshear
Differential Revision: D4289790
fbshipit-source-id: ef5a8bf
Summary:
Remember which globals are static locals.
It's useful to distinguish those from global variables in objc and in the SIOF
checker. Previously in ObjC we would accomplish that by looking at the name of
the variable, but that wouldn't work reliably in C++. Keep the old method around for
now as the way we deal with static locals in ObjC needs some fixing.
Reviewed By: akotulski
Differential Revision: D4198993
fbshipit-source-id: 357dd11
Summary:
`DB.source_file_to_string` is very easy to misuse and it shouldn't even exist.
In preparation for that day, replace most of `source_file_to_string` with `source_file_pp`
Reviewed By: jvillard
Differential Revision: D4258390
fbshipit-source-id: 447cf5a
Summary:
Currently cfg nodes are written into dot files in whatever order they
appear in a hash table. This seems unnecessarily sensitive, so this
diff sorts the nodes.
Reviewed By: dulmarod
Differential Revision: D4232377
fbshipit-source-id: a907cc6
Summary:
introduce `AttributesTable.load_defined_attributes` which will return proc attributes only if the procedure is defined. In order to not mess up
with existing caching, create another hashmap to store those procdescs.
We need to do that because with reactive capture we no longer can assume that all proc attributes are final before analysis starts
Reviewed By: jberdine
Differential Revision: D4231575
fbshipit-source-id: e795bcb
Summary: Pure refactoring simplifying the code doing the case analysis for execturing the cast instruction.
Reviewed By: dulmarod
Differential Revision: D4215238
fbshipit-source-id: 9f0f163
Summary:
1. Always store cpp model source_file with relative path. This will make them cache friendly independent of infer location
2. Distinguish between "relative to project root" and "relative to infer models src"
3. Unify `source_file_from_path` used by java and C frontends into one function. There are no improvements to that logic yet
4. Move `is_cpp_model_file` to use `source_file` instead of `filename`
Reviewed By: jberdine
Differential Revision: D4204548
fbshipit-source-id: 6e21771
Summary: D4189956 killed the phantom space printed after types, but the Context leak message was relying on it :).
Reviewed By: jeremydubreil
Differential Revision: D4208591
fbshipit-source-id: 9f0d709
Summary: These are dangerous if you are trying to compare a type to a string, and they're also unsightly.
Reviewed By: jvillard
Differential Revision: D4189956
fbshipit-source-id: 14ce127
Summary:
SIOF is only for interactions between objects of non-POD types. Previously the
checker was also reporting for POD types.
Reviewed By: akotulski
Differential Revision: D4197620
fbshipit-source-id: 7c56571
Summary:
Record an abstraction of the bug traces in the tests. The abstraction of a
trace is the sequence of descriptions. In practice, descriptions are either
empty, or of the form "start/end/return from/call to procedure X". They seem
pretty stable.
Motivation: there is nothing testing the traces reported by Infer right now,
even though they are surfaced to developers. For instance, Quandary uses
--issues-txt instead of --issues-tests to make sure the traces do not regress.
This change would make this approach more widespread.
Reviewed By: sblackshear
Differential Revision: D4159597
fbshipit-source-id: 9c83952
Summary: The thread safety checker is run independently of other analyses, using the command "infer -a threadsafety -- <build-command>".
Reviewed By: sblackshear
Differential Revision: D4148553
fbshipit-source-id: bc7b3f9
Summary: When searching for cast errors, types that were not Java objects, e.g. arrays of primitive types were not taken into account, leading to incorrect class cast excpetion reports.
Reviewed By: sblackshear
Differential Revision: D4166184
fbshipit-source-id: 7157c95
Summary:
This adds generic support for reporting error traces as usual infer issues
traces (instead of putting them in the textual description of the error) to
Trace.ml and SinkTrace.ml.
The siof checker is made to use these new traces, and gets an improved error
message mentioning the name of the problematic global as well, which requires a
slight API change in Pvar.re.
The support in Trace.ml is incomplete: passthroughs are ignored. This missing
feature will be needed by Quandary to migrate its error messages.
Reviewed By: sblackshear
Differential Revision: D4159542
fbshipit-source-id: 8c1101d
Summary:
It was defined in two places and I'm about to add a third, so let's share
instead.
Reviewed By: sblackshear
Differential Revision: D4153420
fbshipit-source-id: 3d2c519
Summary:
Location.nLOC was introducing a lot of complexity for little benefit (and edge cases were wrong anyway).
We can restore it in some simplified way if we find that we need it
Reviewed By: jeremydubreil
Differential Revision: D4139868
fbshipit-source-id: 4f8e033
Summary:
Summaries are modified before saving from disk, for example the attributes of the postcondition can change.
I have observed flaky reports of the internal error NULL_TEST_AFTER_DEREFERENCE. Some attributes (e.g. assigned) are changed before saving, but the spec table in memory is not changed.
So in case:
1) the procedure is analyzed on-demand, then subsequent uses in the same process use the summary in memory with the unchanged attribute, and the issue is not reported.
2) the procedure is already on disk and loaded, then the loaded summary has the changed attributes, and the issue is reported.
Flakiness happens as because of parallelism, whether a procedure is analyzed already or whether it is analyzed on-demand, can change.
The normalization function can change the instrumentation of a symbolic heap because it uses the existing comparison functions, which ignore instrumentations.
So normalization can replace part of a symbolic heap with an identical one but where the instrumentation is different — this is what I have observed.
The diff uses a different comparison function where instrumentations are taken into account.
Reviewed By: jberdine
Differential Revision: D4140031
fbshipit-source-id: f4f119a
Summary: Don't use a hardcoded string, and enable reports in --issues-tests.
Reviewed By: jvillard
Differential Revision: D4110731
fbshipit-source-id: 9922557
Summary:
this makes frontends no longer depend on SymExec.ml. `ModelBuiltins` was split into two modules:
- `BuiltinDecl` with procnames for builtins (used to determine whether some function is a builtin)
- `BuiltinDefn` with implementations used by `SymExec`
- they both have similar type defined in `BUILTINS.S` which makes sure that new builtin gets added into both modules.
During the refactor I ran some scripts:
`BuiltinDecl.ml`:
let X = create_procname "X"
cat BuiltinDecl.ml | grep "create_procname" | tail -70 | awk ' { print $1,$2,$3,$4,"\42"$2"\42"} '
then manually confirm string match. Exceptions:
"__exit" -> "_exit"
"objc_cpp_throw" -> "__infer_objc_cpp_throw"
__objc_dictionary_literal
nsArray_arrayWithObjects
nsArray_arrayWithObjectsCount
`BuiltinDefn.ml`:
let X = Builtin.register BuiltinDecl.X execute_X
cat BuiltinDecl.ml | grep "create_procname" | tail -70 | awk ' { print $1,$2,$3,"Builtin.register BuiltinDecl."$2,"execute_"$2} '
then, fix all compilation problems
Reviewed By: jberdine
Differential Revision: D3951035
fbshipit-source-id: f059602
Summary:
- do a semantic analysis of each variable initializer to figure out if they need initialization
- add a flag to globals that is true when they are `constexpr`. In that case, no analysis is needed as the user + compile guarantee that it is a compile-time constant.
Reviewed By: sblackshear
Differential Revision: D4081273
fbshipit-source-id: 44dbe29
Summary:
Merging the results directories of targets on buck projects involved creating symbolic links into buck-out.
The bulk of files are .attr files: one per procedure. Creating these links can be a bottleneck, and the merge phase can be slower than the analysis phases on projects with many procedures.
This diff introduces multilinks to speed up merge.
A multilink is a file `multilink.txt` containing a sequence of paths
```
path/to/file1.ext
path/to/file2.ext
...
```
A multilink file is a compact way to represent a link for each entry.
This diff creates a multilink file for each `attributes/dir` directory, instead of one symbolic link for each file.
Reviewed By: jberdine
Differential Revision: D4067428
fbshipit-source-id: 911f8a9
Summary:
Declared and defined procedure attributes are now saved in different files (hashed_name.decl.attr and hashname.attr).
We always try to load using the filename of defined procedure attributes first,
and fall back to loading the file for declared ones if it does not exist.
The logic for replacing an existing file stays the same, with one extra thing:
when a file for a defined attribute is written, the one for the declared one
is deleted if it exists.
At the end of a capture, either a declared or a defined file exist, but not both.
The reason for this change is that when captures of different subprojects are
merged together, it can happen that a link gets created to a declared attributes
file even though a defined one exists, so the body of the procedure will not be analyzed.
After this diff, both links will be created, and the defined one will be loaded
by the back-end.
Reviewed By: dulmarod
Differential Revision: D4037423
fbshipit-source-id: 74fb7e6
Summary:
Checker for the Static Initialization Order Fiasco pattern:
https://isocpp.org/wiki/faq/ctors#static-init-order
1. Collect all globals (transitively) accessed in any given procedure.
2. Once the interprocedural analysis has finished, look at globals accessed in
initializers that do not belong to the current translation unit.
Reviewed By: sblackshear
Differential Revision: D3780266
fbshipit-source-id: 1d07161
Summary:
Create dummy functions representing the initializers of global variables. This
is so we can implement checks in the backend that can look at the initializer
expressions of global variables. We try not to create these dummy functions
when the initializer is not present, although for some reason we sometimes end
up with empty initializers.
Also add source file info to global variables in the backend (Pvar.re).
Reviewed By: sblackshear
Differential Revision: D3780238
fbshipit-source-id: 2dca87e
Summary: Nothing mutates those fields so there is no need to make them `mutable`
Reviewed By: cristianoc
Differential Revision: D4009166
fbshipit-source-id: b840a4b
Summary:
This diff removes the unused support for reporting props, which enables
refactoring so that the 'base' directory has no dependencies, and the
'IR' directory depends only on 'base'.
Reviewed By: jvillard
Differential Revision: D3981352
fbshipit-source-id: 3700a23
Summary: That data was never used and removing it can simplify frontends quite a bit.
Reviewed By: jberdine
Differential Revision: D3967389
fbshipit-source-id: d65c3da
Summary: The code has not much to do with IR and should be part of backend/ directory.
Reviewed By: sblackshear
Differential Revision: D3950834
fbshipit-source-id: 315ea19
Summary:
In order to have only InferJava depend on JBasics, do not use
JBasics.java_lang_object in the IR or backend. Note that this implies
that the Java frontend should ideally translate JBasics.java_lang_object
to Typename.Java.java_lang_Object.
Reviewed By: jeremydubreil
Differential Revision: D3956468
fbshipit-source-id: def64dd
Summary:
Change Sil.Call instruction to have only a single optional return
identifier, insted of a list. Essentially none of the code handled
multiple return identifiers. Also, add the type of the return
identitifier to Call instructions.
Reviewed By: sblackshear
Differential Revision: D3919358
fbshipit-source-id: d2d4f72
Summary:
Refactor Sil.struct_typ and associated operations into a separate
StructTyp module. This is possible now that Typ.Tstruct only carries a
type name instead of the definition directly, and is helpful to simplify
module dependencies.
Reviewed By: cristianoc
Differential Revision: D3919357
fbshipit-source-id: a37a656
Summary:
It is no longer necessary to keep the name of a struct within the
struct, as the name will just have been used to look it up.
Reviewed By: cristianoc
Differential Revision: D3919355
fbshipit-source-id: ab65168
Summary:
Pass the exe_env to checker cluster callbacks, and add it to the domain
extras for BoundedCallTree, and use the Exe_env instead of
AttributesTable to obtain the tenv.
Reviewed By: sblackshear
Differential Revision: D3921850
fbshipit-source-id: 9edf324
Summary: The Infer builtins can be used in the e2e tests, but those tests should not depend on the Infer models to avoid cyclic dependencies. This diff separates the models and the Infer builtins in two directories so that the test can depend on the builtins without depending on the models
Reviewed By: sblackshear
Differential Revision: D3929478
fbshipit-source-id: 7d0ab79
Summary:
The global reference `DB.current_source` is used internally in the module DB, by all the front-ends, and directly and indirectly by the back-end, including saving and restoring the state in case of on-demand procedure calls. In particular, it is heavily used in printing functions.
This diff cleans up the flow of information about what the current file is, making it explicit, and removes the reference.
Reviewed By: jberdine
Differential Revision: D3901247
fbshipit-source-id: ef596bd
Summary:
This diff removes the redundancy in the representation of types where
struct types could be represented either directly using Tstruct or
indirectly using Tvar to refer to the type environment. A consequence
is that it is much harder to construct large type values.
Reviewed By: sblackshear, cristianoc
Differential Revision: D3839753
fbshipit-source-id: cf04ea5
Summary:
Rename Typ.mk_struct to internal_mk_struct, and add Tenv.mk_struct that
ensures types are added to the environment under the right name.
Reviewed By: cristianoc
Differential Revision: D3791865
fbshipit-source-id: fd4b667
Summary:
The Typ.struct_typ.csu field is now redundant with the Csu.t in the
name: Typename.t field.
Reviewed By: cristianoc
Differential Revision: D3791861
fbshipit-source-id: 5370885
Summary: Replace the struct_name: Mangled.t option field of Typ.struct_typ with name: Typename.t
Reviewed By: sblackshear
Differential Revision: D3791860
fbshipit-source-id: 3ee1d00
Summary:
When a project defines the same symbol in different files,
the results of the capture will be different depending on
the order in which files are captured.
In particular, if a procedure with the same name is defined in different files,
it will be associated with the last file being captured.
So the results can be different if the files are processed in different order.
In case of parallel capture, this has in effect a non-deterministic behaviour.
This diff defines a canonical file (alphabetically) when a procedure is multiply
defined, so that the procedure is associated to the same file whatever the order.
Reviewed By: jeremydubreil
Differential Revision: D3805002
fbshipit-source-id: 2c561f4
Summary:
Infer doesn't go looking into field values when looking for unsigned
expressions, which could cause some unintended reports.
Reviewed By: sblackshear
Differential Revision: D3724232
fbshipit-source-id: 9c4cd97
Summary:
This helps avoid some unintended reports where the actual is known to point to
a specific object before a call to a skipped function. This requires a change
in the plugin to export more info about const types.
Reviewed By: dulmarod
Differential Revision: D3711901
fbshipit-source-id: f5c903e
Summary:
Clean up the API to access component of propositions.
Use uniform naming for getting and setting components.
Reviewed By: jberdine
Differential Revision: D3696180
fbshipit-source-id: a8aedb0
Summary:
This diff lifts the Prop.Attribute module out of Prop. This required
moving several Prop functions that depend on Attribute
(find_arithmetic_problem, deallocate_stack_vars, find_equal_formal_path)
and adding numerous calls to Prop.normalize to fix normal/exposed
mismatches. Also note that the type of Prop.normalize is generalized to
allow calling it on normalized props.
Reviewed By: cristianoc
Differential Revision: D3684523
fbshipit-source-id: f37af8b
Summary:
Move the Sil.attribute type and associated types and operations to a new
PredSymb module.
Reviewed By: cristianoc
Differential Revision: D3683834
fbshipit-source-id: d3606a8
Summary:
Change the Aobjc_null attribute from a family of unary predicates, one
for each Pvar.t * Ident.fieldname list, to a single binary predicate.
This diff should not change behavior except for printing of Aobjc_null
attributes. Also, operations such as free variables, etc. should now
behave correctly with respect to variables occurring in the arguments of
Aobjc_null.
Reviewed By: cristianoc
Differential Revision: D3669392
fbshipit-source-id: fe4434a
Summary:
Add support for nary predicates, not just unary ones. Many operations
don't make much sense for nullary predicates, and are generally treated
as no-ops. The first argument is treated specially, as the "anchor" of
the predicate application. For example, adding or removing an attribute
uses the anchor to identify the atom to operate on. Also, abstraction
and normalization operations treat the anchor specially.
Reviewed By: cristianoc
Differential Revision: D3669391
fbshipit-source-id: 3d142ea
Summary:
Change representation of pure predicate applications to distinguish
between positive and negative literals using the Apred and Anpred
constructors instead of a boolean field.
This representation is more compact, and is uniform with the treatment
of equalities and disequalities. Some code is simpler, but there isn't
much in it.
Reviewed By: cristianoc
Differential Revision: D3669387
fbshipit-source-id: 07cdea6
Summary:
Replace disequalities to Attribute expressions with predicate symbol
application pure atomic formulas.
This diff should preserve existing behavior, up to the comparison order
of attribute disequalities versus predicate applications.
Reviewed By: sblackshear
Differential Revision: D3647049
fbshipit-source-id: c39a901
Summary:
Store more information inside Procname.objc_cpp type: replace mangling info
with "kind" info, which also contains mangling info when appropriate.
Reviewed By: akotulski
Differential Revision: D3580283
fbshipit-source-id: b1197ed
Summary: Move Sil.dexp type and operations into separate DecompExp module.
Reviewed By: dulmarod
Differential Revision: D3548095
fbshipit-source-id: 5ab4360
Summary:
Move Sil.call_flags type and operations into separate CallFlags
module.
Reviewed By: dulmarod
Differential Revision: D3548086
fbshipit-source-id: 6d264e9
Summary: Move Sil.binop type and operations into separate Binop module.
Reviewed By: dulmarod
Differential Revision: D3548082
fbshipit-source-id: 356bee3
Summary: Move Sil.unop type and operations into separate Unop module.
Reviewed By: dulmarod
Differential Revision: D3548077
fbshipit-source-id: 49d3d83
Summary: Move Sil.const type and operations into separate Const module.
Reviewed By: dulmarod
Differential Revision: D3548073
fbshipit-source-id: 388d03e
Summary:
Remove recursion from strexp type and functions that is no longer
needed.
Reviewed By: dulmarod
Differential Revision: D3548070
fbshipit-source-id: c4999b7
Summary:
Remove recursion from dexp type and functions that is no longer
needed.
Reviewed By: dulmarod
Differential Revision: D3548068
fbshipit-source-id: 79de8b6
Summary:
Remove recursion from const type and functions that is no longer
needed.
Reviewed By: dulmarod
Differential Revision: D3548064
fbshipit-source-id: e123c24
Summary:
Move attribute values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: cristianoc
Differential Revision: D3548055
fbshipit-source-id: 31a9121
Summary:
The Aobjc_null attribute does not need a fully general exp. This diff
refines this to a possibly-empty path of fields starting from a pvar,
which reduces interdependence between Sil types.
Reviewed By: dulmarod
Differential Revision: D3548043
fbshipit-source-id: 49d16ab
Summary:
Move closure values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: sblackshear
Differential Revision: D3541364
fbshipit-source-id: 1a2f998
Summary:
Move exception values from const to exp. They are not constants, and
this reduces interdependence between Sil types.
Reviewed By: sblackshear
Differential Revision: D3541355
fbshipit-source-id: f22e0ba
Summary: Change length of Dsizeof from an exp to a dexp. This make a little progress toward reducing the types that must be mutually recursive with exp.
Reviewed By: sblackshear
Differential Revision: D3541337
fbshipit-source-id: 95d1f70
Summary:
Simplify DB initialization by removing some unit functions, since
Config values are now already initialized at module load time.
Reviewed By: akotulski
Differential Revision: D3522728
fbshipit-source-id: ac93d30
Summary:
Now that array types record only static - and therefore constant -
lengths, Sil typ and exp no longer need to be mutually recursive.
This diff:
- splits the recursion in the type definitions of typ and exp,
- splits the recursion in the comparison and pretty-printing
functions,
- and then refactors typ into a separate module.
Reviewed By: cristianoc
Differential Revision: D3423575
fbshipit-source-id: 6130630
Summary:
This diff refactors Sil.Int, which represents integer literals, into a
separate module IntLit. There are no dependencies forcing Sil.Int to
be a submodule of Sil, and it is also no simpler as a submodule.
Reviewed By: cristianoc
Differential Revision: D3422910
fbshipit-source-id: 63013f2
Summary:
Array types where the length is not statically known were represented
using fresh variables. This diff:
- Makes array type length optional, reducing the amount of work needed
for renaming, substitution, and normalization.
- Revises uses of array length so that the length component of a
Tarray type represents only the statically determined constant
length of an array type, and the length component of a Sizeof
expression represents the dynamically determined length of an array
value.
- Restricts the type of static lengths from a general expression
(Sil.exp) to an integer (Sil.Int.t), enforcing that static types are
constant. This in particular ensures that types contain no
variables, and so are invariant under operations such as renaming
and substitution.
- Removes the type substitution and renaming functions typ_sub,
typ_normalize, and typ_captured_ren. Now that array type lengths
are constant integers, all of these functions are the identity.
Reviewed By: cristianoc
Differential Revision: D3387343
fbshipit-source-id: b5db768
Summary:
This diff extends Sizeof expressions with an optional expression for the
length of the final extensible array, if any. For example, sizeof a
simple array `sizeof(t[n])` is represented by (modulo subtyping info)
`Sizeof t (Some n)`, and sizeof a struct whose final member is an array
`sizeof(struct s {... t[n] f})` is represented by `Sizeof (struct s
{... t[n] f}) (Some n)`.
This is an intermediate step toward eliminating expressions from types,
the redundancy between the length in the types and in the sizeof
expressions will be eliminated later.
Reviewed By: cristianoc
Differential Revision: D3358763
fbshipit-source-id: 2239bca
Summary:
This change introduces a new binary, called `InferStatsAggregator`, that once invoked, aggregates
together all the stats generated by the single invocations of frontend/backend/reporting, that can
be used for performance measurements.
Reviewed By: jvillard
Differential Revision: D3317000
fbshipit-source-id: 61ec615
Summary:
The typ_iter_types, exp_iter_types, and instr_iter_types functions of
Sil are unused.
Reviewed By: cristianoc
Differential Revision: D3332878
fbshipit-source-id: e8d8f71
Summary:
Optimize attribute loading by caching all attributes read from file in
memory. This reduces io and allocation rate and raises memory usage.
Reviewed By: cristianoc
Differential Revision: D3321156
fbshipit-source-id: 37bc6bc
Summary:
Reimplement command line options in preparation for uniformly passing
options from the top-level infer driver that invokes a build command
through the build system to the descendant infer processes.
All command line options of all executables are collected into Config,
and declared using a new CommandLineOption module that supports
maintining backward compatibility with the current command line
interface. Very few values representing command line options are
mutable now, as they are set once during parsing but are constant
thereafter. All ordering dependencies are contained within the
implementation of Config, and the implementation of Config is careful to
avoid unintended interactions and ordering dependencies between options.
Reviewed By: jvillard
Differential Revision: D3273345
fbshipit-source-id: 8e8c6fa
Summary:
Results of AbsInt checkers are node id -> abstract state maps.
It's hard to compare/combine the results of multiple analyses if the node id types are different.
Needed for the upcoming improvements of the preanalysis.
Reviewed By: jvillard
Differential Revision: D3235669
fb-gh-sync-id: c5251cf
fbshipit-source-id: c5251cf
Summary:
The case where the right hand side of the `Letderef` expression is an identifier was missing. With this diff, the following example is now working as expected:
class A {
public Object foo() {
return new Object();
}
}
class B extends A {
public Object foo() {
return null;
}
}
public class Test {
static Object bar(A a) {
return a.foo();
}
static void shoulReport() {
B b = new B();
bar(b).toString();
}
}
using the command:
INFER_LAZY_DYNAMIC_DISPATCH=1 infer -- javac Test.java
Reviewed By: sblackshear
Differential Revision: D3238986
fb-gh-sync-id: d6059fb
fbshipit-source-id: d6059fb
Summary:
As suggested in the discussion https://github.com/facebook/infer/issues/326 this pull request implements
```ocaml
get_overriden_method : Tenv.t -> Procname.java -> Procname.t
```
to get the method of a superclass that is being overridden by a specific java pname.
I thought of unit test this, but unfortunately I wasn't able to figure out how to create the proper context with OUnit2. Perhaps the easiest way to test this will be integration tests.
Feel free to reject the pull request if unit tests are mandatory (or for any other reason, of course).
Closes https://github.com/facebook/infer/pull/341
Reviewed By: jeremydubreil
Differential Revision: D3221254
Pulled By: sblackshear
fb-gh-sync-id: 9c26258
fbshipit-source-id: 9c26258
Summary:Make node ids be `private int` to make sure we don't mix them with random
integers from other sources.
Reviewed By: sblackshear, cristianoc
Differential Revision: D3179670
fb-gh-sync-id: 4bcf4f0
fbshipit-source-id: 4bcf4f0
Summary:This wasn't used anywhere. Frontends that wish to do something like goto can
just set the targets of the goto as successors of the current node, no need for
a special instruction to do that.
Reviewed By: sblackshear
Differential Revision: D3179826
fb-gh-sync-id: 572a6f2
fbshipit-source-id: 572a6f2
Summary:public
When a conditional is the last instruction, there will be a join node leading directly to the exit node.
Some instructions, such as nullification of dead variables, and abstraction, are added to the control flow graph automatically. But, join nodes cannot contain instructions. So when a procedure ends with a conditional, there might be no place to store these instructions.
This diff adds one extra node between the join and the exit node in that situation.
Reviewed By: jvillard
Differential Revision: D3179056
fb-gh-sync-id: 2b9cd7e
fbshipit-source-id: 2b9cd7e
Summary:public
Refactor Utils.SymOp into a separate module, bringing the failure_kind
type and associated operations.
Reviewed By: cristianoc
Differential Revision: D3161640
fb-gh-sync-id: be3d7c9
fbshipit-source-id: be3d7c9
Summary:public
Eliminate the use of the -open Utils command line option passed to the compiler in favor of `open! Utils` in each source file. While slightly convenient, this option causes more headaches than it is worth with other tools e.g. merlin.
Reviewed By: jvillard
Differential Revision: D3168193
fb-gh-sync-id: 4285ef6
fbshipit-source-id: 4285ef6
Summary:public
Rename functions and arguments to be more uniform, and change several to simplify types by using Builtin.t.
Reviewed By: cristianoc
Differential Revision: D3107836
fb-gh-sync-id: 8445f79
fbshipit-source-id: 8445f79
Andrzej Kotulski
Cristiano Calcagno
Jeremy Dubreil
Sam Blackshear
Kihong Heo
Josh Berdine
Peter O'Hearn
Martino Luca
Jules Villard
Ryan Rhee
Yunxing Dai
Dulma Churchill
Daiva Naudziuniene
Luis Cruz