Summary:
This turned into a pretty big refactoring: the
`IntraproceduralAnalysis.t` needs to be passed around through quite a
few functions. These functions usually depended on
tenv/proc_desc/proc_name that are already in the `analysis_data` so
refactored that too (checking that these were indeed the same as in the
`analysis_data` record (using my own eyeballs). Interestingly there is
one place where we actually turn the analysis to other proc descs than
the original one in eradicate.ml so I've added a small comment there.
Reviewed By: mityal
Differential Revision: D21351909
fbshipit-source-id: 6e6330e5b
Summary: The contract for reporting races in C++ is to flag races between writes under lock with reads without a lock. This diff restores that contract which had been violated by recent changes.
Reviewed By: jberdine
Differential Revision: D21383876
fbshipit-source-id: 6a84e1506
Summary: As per title. Also, hide most deduplication functionality inside a module.
Reviewed By: skcho
Differential Revision: D21382377
fbshipit-source-id: d979f5b54
Summary:
This diff changes way we treat classes w.r.t. to Nullsafe modes when
issuing meta-issues.
Previously, we considered nested class independently of the outer one.
This was leading to a tricky case: when the class is clean but nested
class needs fixing, meta-info told that class can be Nullsafe.
This is counter-intutive and lead to problems when users tried to follow
wrong nullsafe suggestions for this case.
After this diff we:
1. Start calculating meta-issues only on the outermost level. This will simplify
reasoning about nullsafe stats.
2. Aggregate all nested issues counters to corresponding outer-level class.
Among others, CLASS_CAN_BE_NULLSAFE Advice will finally become
actionable in all known cases.
Reviewed By: artempyanykh
Differential Revision: D21353607
fbshipit-source-id: a17c6958a
Summary:
That function was testing if a proc is defined (ok) and if so if it also
had no summary. The second check is wrong because it could be that the
function hasn't been analysed yet. We should call "Ondemand" instead.
But, it seems like a weird check so I just deleted it and replaced is
with just the "is defined" check.
Renamed the "is_library" field in typeOrigin to "is_defined" to better
reflect the expectations. While I was at it, inlined record type
definitions in `TypeOrigin.t`. They were already inlined except for 2!
Reviewed By: dulmarod
Differential Revision: D21351453
fbshipit-source-id: 1acc7ff90
Summary:
This is to eventually remove eradicate's dependency on Ondemand and
other modules in backend/.
Reviewed By: mityal
Differential Revision: D21351456
fbshipit-source-id: 1c4723cbc
Summary: Improve determinism by sorting the order of capture databases before merging.
Reviewed By: jvillard
Differential Revision: D21378208
fbshipit-source-id: 9c82d9d56
Summary:
These exceptions were caught earlier before but D21257474 made absint
log an error every time before reraising them.
The exception type had to move to IR/ or absint/, so I moved
"SchedulerTypes" to "absint/TaskSchedulerTypes" and added the restart
scheduler's exception there. There is already a "Scheduler.ml" file in
absint/ so to address the ambiguity I added "Task" in front of that one.
Reviewed By: ngorogiannis
Differential Revision: D21348593
fbshipit-source-id: 58055c9b7
Summary: Factor out common behaviour and error handling in executing buck commands, while protecting from `SIGQUIT` which results in thread dumps appearing in standard output.
Reviewed By: jvillard
Differential Revision: D21331696
fbshipit-source-id: d3b6abe2d
Summary:
List of things happening in this unreviewable diff:
- moved PulsePathCondition to PulseSledge
- renamed --pulse-path-conditions to --pudge
- PulsePathCondition now contains all the arithmetic of pulse
(inferbo+concrete intervals+pudge). In particular, moved arithmetic
attributes into PulsePathCondition.t. PulsePathCondition plays the
role of PulseArithmetic (combining all domains).
- added tests for a false positive involving free()
- PulseArithmetic is now just a thin wrapper around PulsePathCondition
to operate on states directly (instead of on path conditions).
- The rest is mostly moving code into PulsePathCondition (eg, from
PulseInterproc) and adjusting it.
Reviewed By: jberdine
Differential Revision: D21332073
fbshipit-source-id: 184c8e0a9
Summary:
We have a common entry point where we skip analysis in nullsafe.
This logic is copied from `Reporting.log_issue_from_summary`.
I believe this should not exist in Reporting: it is not the right place
to decide whether to suppress issues: we should not try to report it in
first place.
Because of that we falsely report "needs improvement" meta-issue while
we don't issue any (they were suppressed but participated in needs
improvement count calculations).
Now this change will make meta-issue to be synced with what the user
actually sees.
Down the line we should have a more reliable fix for that.
So far I reviewed suppressing code and looks like we should not suppress
anything else (unless explicitly SuppressLint-ed, which is fine).
Reviewed By: artempyanykh
Differential Revision: D21328634
fbshipit-source-id: 120ce06d1
Summary:
Add a new data structure and use it for the map of memory accesses to
limit the number of destinations reachable from a given address. This
avoids remembering details of each index in large arrays, or even each
field in large structs.
Reviewed By: skcho
Differential Revision: D18246091
fbshipit-source-id: 5d3974d9c
Summary:
Kotlin has an experimental support for [JSR-305 custom nullability
qualifiers](https://github.com/Kotlin/KEEP/blob/master/proposals/jsr-305-custom-nullability-qualifiers.md).
Annotating Nullsafe in a special way makes kotlinc recognize it as
such custom nullability qualifier and therefore treat types coming
from Nullsafe Java classes **not** as platform types, but rather
proper nonnull/nullable, which affects:
1. Generated bytecode (more thorough null-checks).
2. Type inference in the IDE.
NOTE re: p.1: one might expect that with properly annotated Java code
Kotlin would avoid inserting runtime checks. This is not how
Kotlin-Java interop works - in reality Kotlin does even more runtime
checking for Java code annotated as Nonull, which IMO is a good
thing, since you can't trust Java anyway.
Reviewed By: mityal
Differential Revision: D21278440
fbshipit-source-id: d0598738a
Summary:
The idea was to keep track of why we know certain facts but actually
these traces are never read. Other arithmetic facts (BoItv and the path
condition) don't have histories so remove them from concrete intervals
too.
Reviewed By: dulmarod
Differential Revision: D21303353
fbshipit-source-id: eecf07b05
Summary:
It suppresses cost reports of access methods, anonymous class methods, and auto-generated methods.
For those methods, this diff blocks reporting both expensive
issue (`EXPENSIVE_COLD_START/_UI_THREAD`) and complexity increase issue (`COMPLEXITY_INCREASE`).
Reviewed By: jvillard
Differential Revision: D21303068
fbshipit-source-id: 1c9533956
Summary:
The C++ tests were a bit of a mess. This diff tries to enforce the following principles:
- mark every function with `_ok` or `_bad` so that when a function appears in `issues.exp` it's easy to figure out the intention;
- mark every false negative and positive with `FP_` and `FN_` to document expectations;
- make every function access one field and participate in at most one issue report so that it's easier to assess changes.
Reviewed By: jvillard
Differential Revision: D21278627
fbshipit-source-id: 9698f716f
Summary:
We were invalidating "*(vec.__infer_backing_array)" instead of the
address of the field itself.
Reviewed By: ezgicicek
Differential Revision: D21280357
fbshipit-source-id: 48b984800
Summary:
The directory was created to have several sets of nullsafe tests but
there is only one in the end. Remove the redundant "-default".
Reviewed By: mityal
Differential Revision: D21300205
fbshipit-source-id: 46ed8b032
Summary:
The directory names had some interesting variety due to historical
reasons.
- {c,cpp,objc,objcpp}/errors/ date from the time when infer was only
biabduction
- java/infer/ dates from the time when we had an "--analyzer" option and
"infer" was one of them (sic), and eg another was "eradicate".
- c/biabduction/ dates from the time when the biabduction analysis was
being migrated to the "checkers" (AI) framework. For some reasons the
tests there are not a subset of c/infer/ but seem to be entirely new
tests.
The convention now dictates that we should name all of these
*/biabduction/. This diff moves the existing tests from c/biabduction/
into c/biabduction/misc/.
Reviewed By: mityal
Differential Revision: D21300147
fbshipit-source-id: 516d1cb15
Summary:
The test for the ant integration used to import all of biabduction tests
via a symlink. This is extremely annoying: whenever the biabduction
tests change, so do the ant tests.
Replace the ant tests with a simple single file project.
Reviewed By: ngorogiannis
Differential Revision: D21301450
fbshipit-source-id: 0d67d71d7
Summary:
Based on a shrewd observation by mityal, we can copy a little bit of
code from nullsafe and cut the dependency between biabduction and
nullsafe. The trick was to notice that biabduction doesn't use the full
power of the functions it was calling.
Reviewed By: mityal
Differential Revision: D21282656
fbshipit-source-id: 906847c26
Summary:
By far the most annoying thing to migrate. There will be a bunch of
these diffs.
Reviewed By: dulmarod
Differential Revision: D21261635
fbshipit-source-id: 0f290dd96
Summary:
This shows how the strategy for making each analysis its own library
looks like. Starting with biabduction since it's one of the worst ones.
A checker cannot depend on ProcData (in its current form) as it contains
a Summary.t. We don't want to change all the analyzers at once so let's
make up a new type. The new type also contains callbacks for Ondemand
since a checker that is its own dune library cannot call Ondemand
directly either (because Ondemand needs Summary.OnDisk).
Once all checkers are migrated we should be able to reclaim the
callbacks set up by callbacks.ml in exchange for these new callbacks,
therefore achieving a neutral callback karma.
Reviewed By: dulmarod, skcho
Differential Revision: D21261638
fbshipit-source-id: fa91ca50f
Summary:
Looks like this one was already causing circular dependency issues!
Saves threading the callback through *many* functions.
Reviewed By: ngorogiannis
Differential Revision: D21261636
fbshipit-source-id: 2b23aa07d
Summary:
- needed to make biabduction/ its own library as it shouldn't depend on
backend/Printer as a result
- it's a higher level of abstraction
Changed NodePrinter to not swallow biabduction timeouts, thereby
removing its footgunness.
Reviewed By: ngorogiannis
Differential Revision: D21261645
fbshipit-source-id: 592526d85
Summary:
absint/ is its own dune library. There was one last obstacle: we need
callbacks to `NodePrinter`. We'll add more to `AnalysisCallbacks` in future
diffs.
Reviewed By: ngorogiannis
Differential Revision: D21257476
fbshipit-source-id: 3a2ddef14
Summary:
`State` is used by the AI framework, which isn't supposed to know about
biabduction/. Split the biabduction-specific parts into
biabduction/State.ml and keep the rest in absint/AnalysisState.ml.
Reviewed By: ngorogiannis
Differential Revision: D21257470
fbshipit-source-id: e01d1fed3
Summary:
`ProcData.t` contains a `Summary.t`. Eventually we want to fix this too
so that checkers don't depend on backend/, i.e. on all the other
checkers via Summary.ml. But in order to migrate progressively we can
first migrate absint/ and one step on the way is for it to not know what
kind of analysis data it is passing around.
This extra flexibility only costs us passing an extra `Procdesc.t` in a
couple more functions so it's actually not a bad change in itself.
Reviewed By: ngorogiannis
Differential Revision: D21257466
fbshipit-source-id: a91f7b191
Summary:
This is needed to make absint/ its own dune library. Modules in absint/
cannot depend on modules in backend/. This is because backend/Summary.ml
depends on *all* the (inteprocedural) analyses since its stores elements
of their domains. But analyses are supposed to depend on absint/ to
use the AI framework and others. Thus absint/ cannot depend on backend/
otherwise it creates a dependency cycle.
Right now infer builds with this cycle because we consider all these
directories to be one library and there is no dependency cycle between
the individual modules, but making absint/ a library makes the situation
coarser.
One actual change in there: one function in PatternMatch was specific to
nullsafe and was moved there.
Reviewed By: ngorogiannis
Differential Revision: D21257467
fbshipit-source-id: 42af43315
Summary:
This is a step in disentangling the various analyses: that file used to
make every checker on biabduction because of a few of its functions that
use biabduction datatypes.
Split reporting.ml into:
- Reporting.ml: the functions all checkers need to report errors. This
is put in absint/ with the other files that are needed by all
checkers.
- SummaryReporting.ml: functions that need to depend on Summary.ml
(useful for later). This is put in backend/ where Summary.ml lives.
- BiabductionReporting.ml: for the biabduction analysis
The rest of the changes are renames to use the appropriate module
amongst the above.
Reviewed By: ngorogiannis
Differential Revision: D21257468
fbshipit-source-id: fa28cefbc
Summary:
This doesn't depend on the java frontend, as we can see from the fact
that it was symlinked from java/ into java_stubs/. So instead of having
these fake stubs (double negation!) put that file in IR/.
Reviewed By: ngorogiannis
Differential Revision: D21257469
fbshipit-source-id: 1c9e88bcc
Summary:
We re-raise all exceptions a few lines below already so this is not
needed. In fact it prevents us from writing the html cleanly before
hitting the exception, which was bad.
Reviewed By: ngorogiannis
Differential Revision: D21257474
fbshipit-source-id: 0b7e2b8d3
Summary:
This fixes a long-standing TODO. I re-ordered the lines by:
- first putting each entry on a single line (replacing "^J " -> " "
in emacs)
- then using emacs' M-x reverse-region
- then auto-formatting again
Reviewed By: skcho
Differential Revision: D21257475
fbshipit-source-id: 91b780a5d
Summary:
The are already ignored by git and can be useful to 1) debug when the
deadcode Makefile has a bug, and 2) help incremental analysis.
Reviewed By: ngorogiannis
Differential Revision: D21277538
fbshipit-source-id: dc6394ed7
Summary: We currently don't support abducing the spec that we need to delete an attribute, that makes the model for `CFBridgingRelease` work les well when it is, for instance, wrapped in a method. We show examples of how this doesn't work at the moment.
Reviewed By: jvillard
Differential Revision: D21176108
fbshipit-source-id: 79aed7a5d
Summary:
We model `malloc` in Objective-C as `malloc_not_fail` I think because the null case is not normally handled in iOS apps because the OS will just killed the app after giving some memory warnings.
So adding `malloc_not_fail` model to Pulse.
Reviewed By: jvillard
Differential Revision: D21278527
fbshipit-source-id: 17a5008fe
Summary:
This translates the construct `ObjCBridgedCastExpr` when the cast_kind is `OBC_BridgeTransfer`, or in syntax, the cast (`__bridge_transfer`).
This cast means that the object is passed from manual memory management to ARC, so one doesn't need to call `release` manually. It is important to model this to avoid false positives.
It translates it as a builtin that we then model in Pulse, the same way we modelled `CFBridgingRelease` which does the same thing.
The name of the builtin is `__free_cf` which is not ideal but I left it like that for compatibility with biabduction. We can change it once we remove this check from biabduction.
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D21176337
fbshipit-source-id: 736ceeb9b
Summary:
Good night, sweet prince. This was never used and hasn't seen progress
in a while.
Reviewed By: jberdine
Differential Revision: D21201932
fbshipit-source-id: e6f537b30
Summary:
In the previous diffs, nullsafe behavior was changed to the following:
nested class mode is inherited from the outer class mode.
Though it is possible to e.g. make nested class Nullsafe and outer not,
or make nested class STRICT and outer just LOCAL, this is an edge case
and we don't want to recommend annotating nested classes by default. The
right way is to make outer class Nullsafe instead.
In this decision, we take into account user experience and codebase
readability.
Reviewed By: ngorogiannis
Differential Revision: D21255806
fbshipit-source-id: 0200cb555
Summary:
With this change, set of possibilities will be more actionable. Most
importantly, this will also educate users and make them realize how
Nullsafe trust works.
NOTE: yes, parenthesis are bit clumsy, but it was the easiest way to
make this change and let the phrase remain grammatically correct.
Reviewed By: artempyanykh
Differential Revision: D21231468
fbshipit-source-id: 4b5349fb5
Summary:
As artempyanykh pointed out, exposing trust list might encourage clients to
start writing business logic manipulating with trust lists outside of
NullsafeMode module, which we don't like to happen.
Reviewed By: artempyanykh
Differential Revision: D21230973
fbshipit-source-id: 39bd0b0d8
Summary:
In the previous diff we changed the semantics of nested classes w.r.t.
to Nullsafe.
Let's make it clear if users will attempt to misuse it.
Reviewed By: artempyanykh
Differential Revision: D21230717
fbshipit-source-id: 0ecc0dd06
Summary:
The order of model list is important to understand which model will be dispatched. Previously, the
models were shuffled with no pattern or rule. This diff sorts them and collects them as groups, so
making it easier to anticipate the dispatch.
Reviewed By: jvillard
Differential Revision: D21227541
fbshipit-source-id: 80be46d86
Summary: Similarly to Enum.name, we model Class.getCanonicalName as returning an arbitrary non-empty string.
Reviewed By: ngorogiannis
Differential Revision: D21207120
fbshipit-source-id: 1e2dbd1fd
Summary:
From the user perspective, the current behavior is confusing.
The users intutitively expect the inner class to inherit Nullsafe mode
from the outer one.
Having a class that is Nullsafe but the inner is not is hence dangerous
and misleading.
For the sake of completeness and to support gradual strictification, we
allow the nested class to improse additional strictness. Particularly,
the inner class can be Nullsafe but the outer can be not.
A follow up to this diff will include warnings telling about redundant and wrong usages of nested annotations.
Reviewed By: artempyanykh
Differential Revision: D21228055
fbshipit-source-id: 75755ad1d
Summary:
1. Most of trust list operations are abstract anyway, we don't actually
rely on the fact that this is list
2. Inside NullsafeMode.ml, we effectively need set operations, which is both more
idiomatic to express and Ocaml and faster
3. This will simplify implementation of the next diff which introduces
mode intersect operation
Reviewed By: artempyanykh
Differential Revision: D21207207
fbshipit-source-id: 0c1fc4426
Summary: Iterator invalidation traces were based on vector rather than iterator itself.
Reviewed By: ezgicicek
Differential Revision: D21202047
fbshipit-source-id: 62ce8a488
Summary: The transition function was using a complicated-looking and possibly-inefficient pattern of options for everything, when simple pattern matching with guards is sufficient.
Reviewed By: skcho
Differential Revision: D21179606
fbshipit-source-id: a37f97594
Summary:
Lets move the logic dealing with non-java classes outside of this module
so we can modify it easier in the next diff.
Reviewed By: artempyanykh
Differential Revision: D21204822
fbshipit-source-id: 67b5937bc
Summary:
Because of this bug, we evaluated anonymous class constructors in
Default mode, even if the underlying class was Nullsafe
Reviewed By: artempyanykh
Differential Revision: D21202986
fbshipit-source-id: a31318901
Summary: Specialise the above option to `true` and remove resulting dead code.
Reviewed By: dulmarod
Differential Revision: D21177041
fbshipit-source-id: 4a1c65850
Summary: This option makes RacerD angelic wrt the ownership of returned objects from procedures without summary. This will now be made the default and the option deprecated up the diff stack.
Reviewed By: dulmarod
Differential Revision: D21174676
fbshipit-source-id: 9c48d3d7d
Summary:
We model Enum.name as returing a constant name, rather than getting real field names. We did this
because we couldn't think of any big gains, in terms of analysis precision/performance, from getting
the real names.
Reviewed By: ezgicicek
Differential Revision: D21201730
fbshipit-source-id: a2dc01a44
Summary: This diff revises the models of Collection.set and get to handle its elements.
Reviewed By: ezgicicek
Differential Revision: D21201242
fbshipit-source-id: 9c248453d
Summary:
We ignored allocator models for vectors, and were not able to initialize vectors properly. This diff fixes this issue.
It also adds a test which was a FN before.
Reviewed By: skcho, jvillard
Differential Revision: D21089492
fbshipit-source-id: 6906cd1d1
Summary: D21155014 replaced `skip` call with a Load but this was not right. Instead, let's add a new builtin function (rather than skip) so that other analyses can freely model it as they want.
Reviewed By: jvillard
Differential Revision: D21178286
fbshipit-source-id: c214ccfb0
Summary: Java has this pattern of wrapping non-thread-safe containers in factory methods producing identically-typed results, but wrapped in a synchronised shell. This diff teaches RacerD about some common factory methods and uses the attribute domain to track the dynamic type of their results.
Reviewed By: ezgicicek
Differential Revision: D21155538
fbshipit-source-id: 42ebe6251
Summary: Complete the set of models for java containers that Infer should not report thread safety violations.
Reviewed By: ezgicicek
Differential Revision: D21138280
fbshipit-source-id: 01e1944b6
Summary: Models were partial and/or simply missing (`Map` writes!). Now the modelled containers use inheritance for conciseness (`List` reads are only those not caught by the `Collection` matcher, etc). Also, add URLs to documentation sources.
Reviewed By: ezgicicek
Differential Revision: D21132069
fbshipit-source-id: fefb360f0
Summary: `CFBridgingRelease` and `__bridge_transfer` which I'll model later, transfer the memory model from manual memory ref count to ARC (automatic ref count), so to avoid false positives this needs to be modelled. We can simply remove the Allocated attribute from the state, which means we won't try to track that memory anymore.
Reviewed By: skcho
Differential Revision: D21088218
fbshipit-source-id: 3520a0d59
Summary: This diff suppresses cost issues on lambda and auto-generated procedures, since they were too noisy.
Reviewed By: ezgicicek
Differential Revision: D21153619
fbshipit-source-id: 65ad6dcc3
Summary:
Replace horrible hack with ok hack.
The main difficulty in implementing the disjunctive domain is to avoid
the quadratic time complexity of executing the same disjuncts over and
over again when going around loops:
First time around a loop, assuming for example a single disjunct `d`:
```
[d]
loop body
[d1' \/ d2']
```
Second time around the same loop: the new pre will be the join of the
posts of predecessor nodes, so `old_pre \/ post(loop,old_pre)`, i.e.
`d \/ d1' \/ d2'`. Now we need to execute `loop body` again
*without running the symbolic execution of `d` again* (and the time after
that we'll want to not execute `d`, `d1'`, or `d2'`).
Horrible hack (before): Disjuncts have a boolean "visited" attached
that does its best to keep track of whether a given disjunct is old or
new. When executing a single *instruction* look at the flag and skip the
state if it's old. Of course we have no way to know for sure so it turns
out it was often wrongly re-executing old disjuncts. This was also
producing the wrong results over even simple loops: only the last
iteration would make it outside the loop for some reason. Overall, the
semantics were pretty untractable and shady at best.
New hack (this diff): only run instructions of a given *node* on
disjuncts that are not physically equal to the "pre" ones already in the
invariant map for the current node.
This gives the correct result over simple loops and a nice performance
improvement in general (probably the old heuristic was hitting the
quadratic bad case more often).
Reviewed By: skcho
Differential Revision: D21154063
fbshipit-source-id: 5ee38c68c
Summary:
This is a preparatory diff to make the actual change more readable. This
just moves the code around, trying to change it as little as possible.
Reviewed By: skcho
Differential Revision: D21154065
fbshipit-source-id: e086318c1
Summary:
This makes the API of [instrs] easier to work with at the price of some
duplication in the GADT.
This allows us to construct `[skip]` in `AbstractInterpreter` without
imposing a particular direction. This will make it the next diffs about
a disjunctive domain easier.
Reviewed By: skcho
Differential Revision: D21153694
fbshipit-source-id: f86c180fa
Summary:
We translated the expression `CXXStdInitializerListExpr` naively in D3058895 as a call to
a skip function, with the hope that it would be translated better in the future. However, the naive means that we lose access to the initialized list/array because we are simply skipping it. So, even if we want to model the initializer properly, we have to deal with the skip specially.
This diff tries to solve this problem by removing the skip call whenever
possible. Instead, we translate the underlying array/list as a Load, so
that when it is passed to the constructor, we can pick it up.
For the following initialization:
``` std::vector<int*> vec = {nullptr};
```
Before, we translated it as
```
*&0$?%__sil_tmpSIL_materialize_temp__n$7[0]:int* const =null
n$8=_fun___infer_skip_function(&0$?%__sil_tmpSIL_materialize_temp__n$7:int* const [1*8] const )
n$9=_fun_std::vector<int*,std::allocator<int*>>::vector(&vec:std::vector<int*,std::allocator<int*>>*,n$8:std::initializer_list<int*>)
```
However, this means, `n$8` would be result of something skipped which we can't reason about. Instead, we just pass the underlying initialized array now, so we get the following translation:
```
*&0$?%__sil_tmpSIL_materialize_temp__n$7[0]:int* const =null
n$8=*&0$?%__sil_tmpSIL_materialize_temp__n$7:int* const [1*8] const
n$9=_fun_std::vector<int*,std::allocator<int*>>::vector(&vec:std::vector<int*,std::allocator<int*>>*,n$8:std::initializer_list<int*>)
```
Reviewed By: jvillard
Differential Revision: D21155014
fbshipit-source-id: 75850b1e6
Summary:
It is true that `Info` issues are normally not intended for the end user
and in general should be hidden by default.
However, the current behavior - show them only if `--no-filtering` is
true - is super non-intuitive and complicates already complex reporting
logic.
Lets use the general "enable/disable" mechanism for controlling this.
Reviewed By: jvillard
Differential Revision: D21154140
fbshipit-source-id: 69e4c88e4
Summary:
Computing sledge's equality relation and normalising terms is costly. We
can avoid doing that most of the time by keeping the sledge path
condition lazily evaluated and only forcing it down to a value at two
critical points in the analysis:
1. Summary creation, to avoid storing unsatisfiable pre/posts that will have
to be needlessly executed by callers. This also saves us from having
to serialise the closures involved in the uncomputed form of lazy
values inside the pulse summaries.
2. Before reporting errors we check in the state is in fact satisfiable.
If not we just prune it away at that point.
This yields ~4x speedup on some targets.
Reviewed By: ezgicicek
Differential Revision: D21129759
fbshipit-source-id: a75fdd3bc
Summary:
This is mostly just a type change for now, more changes to come. This
doesn't make thing much faster yet because we force computations pretty
often to check for unsatisfiability (each function call and PRUNE node).
Next diff will build on that.
Reviewed By: skcho
Differential Revision: D21129758
fbshipit-source-id: 72200e2b1
Summary:
When encountering a constant, pulse creates an abstract value (a
variable) to represent it, and remembers that it's equal to it. The
problem is that pulse doesn't yet know how to deal with the fact that
some variables are going to be equal to each other.
This hacks around this issue in the case of constants, within the same
procedure, by remembering which constants have been assigned to which
place-holder variables, and serving those variables again when the same
constant is translated again.
Limitation: this doesn't work across procedure calls as the "constant
maps" are not saved in summaries.
Something to look out for: we don't want to make `if (p == NULL)` create
a path where `p` is invalid (we only make null invalid when we see an
assignment from 0, i.e. `p = NULL;`).
Reviewed By: ezgicicek
Differential Revision: D21089961
fbshipit-source-id: 5ebb85d0a
Summary:
1. Package will make the error too verbose.
2. We don't even need to say it is "class" because we say it in the error
description ("Class has 0 issues and can be marked Nullsafe").
Reviewed By: artempyanykh
Differential Revision: D21131998
fbshipit-source-id: 6ccca7615
Summary:
One source of false positives on container races is when the container member field is initialised to a concurrent version in a constructor, but the static type of the field doesn't reflect the thread safety of it.
This solution
- tracks flows from constructors of safe data structures to abstract addresses;
- initialises the initial attribute state when analysing a non-constructor method to that achieved by all constructors/class-initializers.
- checks for that attribute when recording container accesses.
Reviewed By: jvillard
Differential Revision: D21089428
fbshipit-source-id: 02a88f6e8
Summary:
As artempyanykh pointed out, `nullable` works much better for required fields
than `optional` in terms of x-plat.
Reviewed By: artempyanykh
Differential Revision: D21129614
fbshipit-source-id: b03c91b78
Summary: Modeling vector iterator with two internal fields: an internal array and an internal pointer. The internal array field points to the internal array field of a vector; the internal pointer field represents the current element of the array. For now `operator++` creates a fresh element inside the array.
Reviewed By: ezgicicek
Differential Revision: D21043304
fbshipit-source-id: db3be49ce
Summary:
The java source file parser should refuse to run on non
.java file. Also, as we expect some autogenerated source files to
break Java official syntax, we catch parsing error silently and
cancel location recording for them.
Reviewed By: jvillard
Differential Revision: D21089587
fbshipit-source-id: 35f1a1e28
Summary:
Now that only races rooted at formals or globals are reported, there is no point using the ownership domain to exclude accesses to locals, so remove the code that initialises the ownership of those.
Also, remove an accidentally quadratic use of `Map.bindings |> List.find` in `FormalMap` and simplify the analysis driver.
Reviewed By: skcho
Differential Revision: D21066855
fbshipit-source-id: 126080778
Summary:
Add a path condition to each symbolic state, represented in sledge's arithmetic domain. This gives a precise account of arithmetic constraints. In particular, it is relation and thus is more robust in the face of inter-procedural analysis.
This is gated behind a flag for now as there are performance issues with the new arithmetic.
Reviewed By: jberdine
Differential Revision: D20393947
fbshipit-source-id: b780de22a
Summary: Move state to summary conversion into the domain file, move a model matcher into the models file and simplify.
Reviewed By: skcho
Differential Revision: D21064351
fbshipit-source-id: bb5b07b6b
Summary:
There are two types of anonymous classes (not user defined classes):
- classic anonymous classes (defined as $<int> suffixes)
- lambda classes (corresponding to lambda expressions). Experimentally,
they all have form `$Lambda$_<int>_<int>`, but the code just uses
`$Lambda$` as a heuristic so it is potentially more robust.
# Problem this diff solves
When generate meta-issues for nullsafe, we are interested only in
user-defined classes, so we merge all nested anonymous stuff to
corresponding user-defined classes and hence aggregate the issues.
Without this diff, for each lambda in the code, we would report this as
a separate meta-issue, which would both screw up stats and be confusing
for the user (when we start reporting mode promo suggestions!).
Reviewed By: artempyanykh
Differential Revision: D21042928
fbshipit-source-id: a7be266af
Summary: In `PowLoc`, we focus on making every constructors of `PowLoc.t` return nomalized value. Thus, it is unnecessary to nomalize any `PowLoc.t` inputs.
Reviewed By: ezgicicek
Differential Revision: D21064893
fbshipit-source-id: d00a7f06b
Summary:
This diff revises how to handle the unknown location in inferbo in two ways:
* stop appending field to the `Unknown` location, e.g. `Unknown.x.a` is evaluated to `Unknown`
* redesign the abstract of multiple locations, like `Bottom` < `Unknown` < `Known` locations
I am doing them in one diff since applying only one of them showed bad results.
Background: `Unknown` was adopted for abstracting all unknown concrete locations, so we could avoid missing semantics of assignments to unknown locations. We tried to keep soundness. However, it brought some other problems related to precision and performance.
1. Sometimes especially when Inferbo failed to reason precise pointer values, `Unknown` may point to many other abstract locations.
2. At that time, value assignments to `*Unknown` makes the situation worse: many abstract locations are updated with imprecise values.
This problem harmed not only its precision, but also its performance since it introduced more location entries in the abstract memory.
Reviewed By: jvillard
Differential Revision: D21017789
fbshipit-source-id: 0bb6bd8b5
Summary: The flags `--biabduction-fallback-model-alloc-pattern` and `--biabduction-fallback-model-free-pattern` were unused because we removed the models from .inferconfig a while ago because of too many false positives. We are implementing a better memory leak check based on Pulse, and are adding the similar flags `--pulse-model-alloc-pattern` and `--pulse-model-free-pattern`.
Reviewed By: jvillard
Differential Revision: D21061511
fbshipit-source-id: 1b3476c22
Summary:
Instead of having to remember to update both the inferbo and the concrete
intervals domains of pulse, hide these details under a unified API. This
should help the transition to adding a third(!) numerical domain later
on (pudge!).
Reviewed By: ezgicicek
Differential Revision: D21022920
fbshipit-source-id: 783157464
Summary:
Now that the shape of the record type of AbductiveDomain.t is known, we
don't need this getter anymore. Keep `get_pre` and `get_post` as they
perform useful casting to `BaseDomain.t`.
Reviewed By: ezgicicek
Differential Revision: D21022924
fbshipit-source-id: 340f4edf8
Summary:
The "interface" modules define short forms for the internals of pulse
and also serve as a guide of which modules you are supposed to use at
which "level" in the pulse domains (base domain vs abductive domain vs
higher-level PulseOperations.ml). Make sure they are used.
Reviewed By: skcho
Differential Revision: D21022927
fbshipit-source-id: f890df245
Summary:
PulseAbductiveDomain.ml can be split into two distinct parts:
1. The definition of the "abductive domain" itself. This remains in that
file.
2. How to apply a given pre/post pair to the current state (during a
function call). This is about the same size as 1. in terms of lines
of code(!) and is now in PulseInterproc.ml.
Reviewed By: ezgicicek
Differential Revision: D21022921
fbshipit-source-id: 431fe061e
Summary:
I'm moving this code in the next diff and need this refactor. It should
be the same as before.
Reviewed By: ezgicicek
Differential Revision: D21022926
fbshipit-source-id: ebe644ef9
Summary:
See the code comment re: why don't we also recommend "strict" at this
stage. We can always change it later when we think users are happy with
strict.
Reviewed By: artempyanykh
Differential Revision: D21039553
fbshipit-source-id: 758ccf32c
Summary:
Having copypaste is painful to support. Lets make .mli the source of
truth.
Improved docs a bit, while I was here.
Reviewed By: artempyanykh
Differential Revision: D20948916
fbshipit-source-id: 1668dbc9c
Summary:
This diff is a step forward to the state when the list of type violations is
independent of the mode (and we use mode solely to decide re: whether to
report or not).
This fixes a case when we incorrectly defined possible promo mode (see
the test payload)
Reviewed By: artempyanykh
Differential Revision: D20948897
fbshipit-source-id: 616b96f96
Summary:
See the comments in the code why it makes logical sense.
This diff is a step forward the state when list of type violations is
independent of the mode (and we use mode solely to decide re: whether to
report or not).
This fixes majority of cases in ModePromotions.java
Reviewed By: artempyanykh
Differential Revision: D20948656
fbshipit-source-id: 82c0d530b
Summary:
Currently we exlude only if the method is based on deprecated config
packages.
Lets use the proper method, which covers both cases (config +
user-defined third party repo).
Reviewed By: artempyanykh
Differential Revision: D20946506
fbshipit-source-id: c3332667f
Summary:
Previously, we learned to detect if Default mode class can be made
Nullsafe(LOCAL).
Lets generalize it and calculate the precise mode.
NOTE 1: We don't distinct shades of "Trust some". We also don't
recommend trust some and recommend "Trust all" instead.
NOTE 2: As you can see from the test payload (see ModePromotions.java),
the precise calculation is not working as expected. This is due to a bug
in nullsafe implementation/design. See follow up diffs that will fix
this test.
Reviewed By: artempyanykh
Differential Revision: D20941345
fbshipit-source-id: 2255359ba
Summary:
The full inventory of everything in infer-out/. The main change is
around "issues directories": instead of registering them dynamically
they are now all declared statically (well, they kind of were already in
Config.ml).
Reviewed By: ngorogiannis
Differential Revision: D20894305
fbshipit-source-id: 1a06ec09d
Summary:
This is another entry in infer-out/, we want these to be predictable,
not user-defined.
Reviewed By: dulmarod
Differential Revision: D20894302
fbshipit-source-id: ee60ddbcf
Summary:
This is an entry in infer-out/, we want these to be predictable, not
user-defined.
Reviewed By: ngorogiannis
Differential Revision: D20894307
fbshipit-source-id: 332f85969
Summary:
This option allowed one to customise the name of the log file, but the
log file lives in infer-out/ so that flexibility is not needed and even
undesirable: we want entries in infer-out/ to be predictable.
Reviewed By: skcho
Differential Revision: D20894304
fbshipit-source-id: 760d91df3
Summary: Another entry to practice adding entries to ResultsDirEntryName.
Reviewed By: skcho
Differential Revision: D20894299
fbshipit-source-id: 9c387e0f3
Summary:
First real step to keep an inventory of all the entries in infer-out/ in
a single place, and associate meta-data to each entry. In particular, we
want to avoid adding things in infer-out/ without a clear idea of
whether they should be cleaned up before going into a cache, or before
an incremental analysis.
Migrate infer-out/tmp/ first just as an example and an excuse to write
the scaffolding code needed for all the other entries.
Reviewed By: skcho
Differential Revision: D20894300
fbshipit-source-id: f796fca55
Summary:
The only accurate entry it contains is the number of files analysed and
we can already get that information from the log file (and console
output).
Reviewed By: dulmarod
Differential Revision: D20894303
fbshipit-source-id: bc180015a
Summary: Needed for later: RunState needs to run files in ResultsDir.
Reviewed By: skcho
Differential Revision: D20894306
fbshipit-source-id: 259b7da69
Summary:
I wanted to change the order in which we try loading them but it changes
analysis results too much for the cost analysis.
Reviewed By: skcho
Differential Revision: D20891172
fbshipit-source-id: f972f314e
Summary:
Simplifies the models story. The model jar is still needed to look up
fields in modelled classes (we save the .class of each model!). This is
sad as we should be able to get these from the models' tenv, which
should be more compact, but that's a bigger change.
Reviewed By: skcho
Differential Revision: D20891117
fbshipit-source-id: fcb5104ae
Summary:
Parsing the standard output of buck is brittle. Instead, use the `--build-report` option, which generates a json file, with a mapping from target name to output path. This already contains all the information required.
This diff adapts the buck-java integration.
Reviewed By: artempyanykh
Differential Revision: D20942858
fbshipit-source-id: faf3f2078
Summary: Unify the models of malloc and for the Create and Copy functions for Core Graphics. This add the null case from the malloc model to the Core Graphics models.
Reviewed By: jvillard
Differential Revision: D20890956
fbshipit-source-id: 278ac9d2f
Summary:
- Open-source stubs are in a library with no dependencies
- That library is included in InferBase, but in facebook builds it
contains no modules
Reviewed By: ezgicicek
Differential Revision: D20922574
fbshipit-source-id: af918a687
Summary:
As soon as pulse detects an error, it completely stops the analysis and loses the state where the error occurred. This makes it difficult to debug and understand the state the program failed. Moreover, other analyses that might build on pulse (e.g. impurity), cannot access the error state.
This diff aims to restore and display the state at the time of the error in `PulseExecutionState` along with the diagnostic by extending it as follows:
```
type exec_state =
| represents the state at the program point that caused an error *)
```
As a result, since we don't immediately stop the analysis as soon as we find an error, we detect both errors in conditional branches simultaneously (see test result changes for examples).
NOTE: We need to extend `PulseOperations.access_result` to keep track of the failed state as follows:
```
type 'a access_result = ('a, Diagnostic.t * t [denoting the exit state] ) result
```
Reviewed By: jvillard
Differential Revision: D20918920
fbshipit-source-id: 432ac68d6
Summary: Consider functions that simply exit as impure by extending the impurity domain with `AbstractDomain.BooleanOr` that signifies whether the program exited.
Reviewed By: skcho
Differential Revision: D20941628
fbshipit-source-id: 19bc90e66
Summary: The pruning location of array size was dummy. This diff gives a right location to traces in the pruning.
Reviewed By: ezgicicek
Differential Revision: D20915167
fbshipit-source-id: 55cc583df
Summary:
Instead of looking up each proc name in models/, pre-compute the list of
models and do lookups there instead of in the filesystem.
Reviewed By: ngorogiannis
Differential Revision: D16603148
fbshipit-source-id: 5eb534a14
Summary:
Java bytecode format does not record the declarations location
for classes and fields. We set up a first infrastructure to recover this
information. Currently we only track location for classes and only gives
the first line of the corresponding source file. We will enhance this location
with source file (baby) parsing in a next diff.
Reviewed By: mityal
Differential Revision: D20868187
fbshipit-source-id: d355475e9
Summary:
This information can be useful for tooling responsible for further
processing (e.g. metric calculation and logging)
Reviewed By: artempyanykh
Differential Revision: D20914583
fbshipit-source-id: 61804d88f
Summary: The heuristics is to find a method in non-abstract sub-classes. See D20647101.
Reviewed By: jvillard
Differential Revision: D20491461
fbshipit-source-id: 759713ef4
Summary:
This diff distinguishes array declaration and size-setting in trace. For example, when there is an
assume statement on an array size, the array size can be pruned to another value. In which case, we
want to see "Set array size" in the trace, instead of "Array declaration".
Reviewed By: jvillard
Differential Revision: D20914930
fbshipit-source-id: 0253fb69e
Summary:
This diff lifts the `PulseAbductiveDomain.t` in `PulseExecutionState` by tracking whether the program continues the analysis normally or exits unusually (e.g. by calling `exit` or `throw`):
```
type exec_state =
| ContinueProgram of PulseAbductiveDomain.t (** represents the state at the program point *)
| ExitProgram of PulseAbductiveDomain.t
(** represents the state originating at exit/divergence. *)
```
Now, Pulse's actual domain is tracked by `PulseExecutionState` and as soon as we try to analyze an instruction at `ExitProgram`, we simply return its state.
The aim is to recover the state at the time of the exit, rather than simply ignoring them (i.e. returning empty disjuncts). This allows us to get rid of some FNs that we were not able to detect before. Moreover, it also allows the impurity analysis to be more precise since we will know how the state changed up to exit.
TODO:
- Impurity analysis needs to be improved to consider functions that simply exit as impure.
- The next goal is to handle error state similarly so that when pulse finds an error, we recover the state at the error location (and potentially continue to analyze?).
Disclaimer: currently, we handle throw statements like exit (as was the case before). However, this is not correct. Ideally, control flow from throw nodes follows catch nodes rather than exiting the program entirely.
Reviewed By: jvillard
Differential Revision: D20791747
fbshipit-source-id: df9e5445a
Summary:
Malloc returns either an allocated object or a null pointer if there is no memory available. Modelling that.
This has always been a bit contentious because this leads to NPEs that people often ignores because they don't care. But if we don't model this, then we have FPs when people do take this into account when freeing the memory.
Reviewed By: jvillard
Differential Revision: D20791692
fbshipit-source-id: 6fd259f12
Summary:
infer-out/tmp/ should be deleted before sending infer-out/ to any cache.
Also separate the list of directories to delete in `delete_capture_and_results_data` and in `scrub_for_caching` as it was only confusing to try to share them.
Reviewed By: ngorogiannis
Differential Revision: D20772512
fbshipit-source-id: b1e4e252c
Summary: This makes it similar to the other dir names in infer-out/.
Reviewed By: ngorogiannis
Differential Revision: D20795359
fbshipit-source-id: 88729d26d
Summary:
This diff limits the depth of abstract location by a constant.
problem: Inferbo generated too many of abstract locations, especially when struct types had many pointer fields and Inferbo was not able to analyze the objects precisely. Since the number of generated abstract locations were exponential to the number of fields, it resulted in OOM in the end.
(reported by zyh1121 in https://github.com/facebook/infer/issues/1246)
Reviewed By: jvillard
Differential Revision: D20818471
fbshipit-source-id: f8af27e5c
Summary:
Currenlty the cost issue is printed at the first node of a function, which is usually the first
statment of the function. This may give a wrong impression that the cost of the statement is
changed.
This diff re-locate where to print issues with heuristics. Going backward from the first node
lines, it looks up a line satisfying,
1. A line should start with <fname> or should include " <fname>".
2. The <fname> found in 1 should be followed by a space, '<', '(', or end of line.
Reviewed By: jvillard
Differential Revision: D20766876
fbshipit-source-id: b4fee3180
Summary:
It's easy to create large arrays in code, eg `int x[1UL << 16];`, but
these can generate huge nodes in SIL because zero-initialization is
translated by zero-ing structures element by element. Introduce a
builtin to use instead. Keep the naive method for small structures (with
a configurable limit on "small").
Reviewed By: dulmarod
Differential Revision: D20836836
fbshipit-source-id: 6bf5410f8
Summary: Modelling `CG.*Release ` and `CFRelease` as `free`. This is what we were doing in biabduction.
Reviewed By: skcho
Differential Revision: D20767174
fbshipit-source-id: c77c1cdc6
Summary:
This models all the Create and Copy functions from CoreGraphics, examples in the tests.
These functions all allocate memory that needs to be manually released.
The modelling of the release functions will happen in a following diff. Until then, we have some false positives in the tests.
This check is currently in biabduction, and we aim to move it to Pulse.
Reviewed By: jvillard
Differential Revision: D20626395
fbshipit-source-id: b39eae2d9
Summary: Sometimes buck hangs with the new integration and using pipes. Use a temp file for standard output and redirect stderr.
Reviewed By: jvillard
Differential Revision: D20856346
fbshipit-source-id: 13a5f90d5
Summary:
Fix all the docstrings that `odoc` or `ocamlformat` is not happy about.
Delete all `[@@ocamlformat "parse-docstring = false"]` pragmas as a
result.
Reviewed By: jberdine, ngorogiannis
Differential Revision: D20798913
fbshipit-source-id: 728d9e45c
Summary:
All dune libraries in infer/src/ were declared with their own public
names, each one needing its own .opam file. There's no need for that:
they can all be part of the `infer` library by calling them `infer.Foo`.
One wrinkle: now we need to explicitly point at their .mld files in the
generated documentation.
Reviewed By: jberdine
Differential Revision: D20798914
fbshipit-source-id: 64b64261c
Summary:
This avoids dune scanning 2000+ directories (according to its logs),
mostly due to scanning infer/tests/ I think.
Reviewed By: artempyanykh
Differential Revision: D20798915
fbshipit-source-id: 3764cd3fb
Summary:
- Add `no_return` models for Java's `exit(...)` methods (can be extended further later on)
- handle throw-catch better by short-cutting throw nodes to not exit node but to all **catch nodes** that are reachable by the node. If there is no catch node, we short-cut to the exit node as before.
This removes a FP from deadstore tests because before we simply were not able to handle CF from throw-> catch nodes at all.
Reviewed By: skcho
Differential Revision: D20769039
fbshipit-source-id: e978f6cdb
Summary:
To find a method in non-abstract sub-classes, this diff applies the
same heuristics of inferbo.
* If the class is an interface: Find its unique sub-class and apply the heuristics recursively.
* If the class is an abstract class: Find/use its own summary if possible. If not found, find
one (arbitrary but deterministic) summary from its sub-classes.
* Otherwise: Find its own summary.
Reviewed By: ezgicicek
Differential Revision: D20647101
fbshipit-source-id: 2f8f3ff81
Summary: When looking at some reports I realised that adding the place where the memory becomes unreachable to the trace makes it more readable.
Reviewed By: skcho
Differential Revision: D20790277
fbshipit-source-id: d5df69e68
Summary:
`IssueLog` is used by the file-level analysis callbacks to store reports outside error logs so as to avoid racing on spec files. Each file should generate a single issue log which is then written to an appropriate file. The starvation checker was breaking that contract because it ostensibly needs to write out multiple issue files when analysing a single source file.
This is unnecessary, because the existing mechanisms for deduplication ensure only one issue file needs to be written out.
The whole-program mode still needs that capability, but this is implemented outside the file-analysis callback.
Reviewed By: mityal
Differential Revision: D20736135
fbshipit-source-id: 620e5484d
Summary:
Sometimes buck emits a timestamp, leading to a crash
> External Error: Failed to parse `buck targets --show-output ...` line of output:
> 2020-03-30 20:03:51
Reviewed By: dulmarod
Differential Revision: D20766438
fbshipit-source-id: 47cc00150
Summary:
OCaml 4.10.0 flagged that the `Extension` functor argument was unused.
Delete it and remove one layer of module in the file too now that it
doesn't need to be a functor.
Reviewed By: mityal
Differential Revision: D20669652
fbshipit-source-id: 089043d7d
Summary:
1. The return value is annotated as Nullable in codebase
2. The second parameter can be null as well.
Reviewed By: artempyanykh
Differential Revision: D20766243
fbshipit-source-id: 9aad37a8c
Summary:
This was needed countless of times. We log current signature, but not
callees.
Reviewed By: dulmarod
Differential Revision: D20765107
fbshipit-source-id: 399926c65
Summary:
This declaration is heavily used in Guava library.
Quick inspection shows that majority of methods are annotated correctly.
This will hide previosly hidden unsoundness issues in the codebase.
Reviewed By: artempyanykh
Differential Revision: D20737104
fbshipit-source-id: aa048bfc1
Summary:
The attribute `[no_return]` signifies that a function doesn't return. Previously, pre-analysis had cut the links to successor nodes of such no-return function nodes. This was intended to help with suppressing reporting on unreachable paths for some analyses. However, this results in having these nodes as dangling, with no connection to exit nodes.
This diff additionally shortcuts these no-return function nodes to exit node. This would allow us to enhance inter-procedural analyses like pulse to kepp track of paths that do not return since we will be keeping their connections at exit node rather than completely cutting them of as before. It would also allow us to assume that all paths start at the one start node and end at the one exit node (at least syntactically in the CFG).
Reviewed By: skcho
Differential Revision: D20736043
fbshipit-source-id: 0eace1bdb
Summary:
D20416859 introduced a new utility
`Process.create_process_and_wait_with_output` that:
1. executes the process to completion
2. reads stdout in full
3. reads stderr in full
Unfortunately, writing to stdout/stderr can be a blocking operation for
the callee process in that situation. Double unfortunately, reading both
stdout and stderr in a way that avoids starvation requires sophisticated
Unix-fu. Fortunately, callers of this utility only ever need to read
*one* of stdout or stderr.
Fix the starvation by:
1. reading *one* channel only (either stdout or stderr)
2. doing the reading *before* `wait`ing on the process to finish
3. redirecting the other channel to the console
Reviewed By: skcho, ngorogiannis
Differential Revision: D20737388
fbshipit-source-id: 2988ac865
Summary:
Knowing the number associated with each issue is useful to pass to
`infer explore --select XXX`.
Reviewed By: skcho
Differential Revision: D20696724
fbshipit-source-id: f6f368aa1
Summary:
Used `2to3` but had to (poorly, sorry!) fix byte -> string output of processes.
update-submodule: facebook-clang-plugins
Reviewed By: ngorogiannis
Differential Revision: D20672767
fbshipit-source-id: 852c7e973
Summary:
infer/lib/python/'s not pinin'! It's passed on! This library is no more!
It has ceased to be! It's expired and gone to meet its maker! It's a
stiff! Bereft of life, it rests in peace! If you hadn't nailed it to the
perch it'd be pushing up the daisies! 'ts metabolic processes are now
'istory! It's off the twig! It's kicked the bucket, it's shuffled off
its mortal coil, run down the curtain and joined the bleedin' choir
invisible!! THIS IS AN EX-PYTHON!!
Reviewed By: ngorogiannis
Differential Revision: D20672771
fbshipit-source-id: 7808c0ece
Summary:
Re-implement the generation of an HTML report (with bug traces) in
OCaml.
Kills the --only-show as a side-effect, it is of dubious use since there
is already infer-out/report.txt to get the report list as text. A
follow-up diff adds numbers to the list in infer-out/report.txt for easy
cross-referencing with `infer explore --select 123`.
Reviewed By: skcho
Differential Revision: D20672769
fbshipit-source-id: 39b3a299d
Summary:
When executing unit tests, don't parse the arguments as they will be
parsed by OUnit.
Reviewed By: skcho
Differential Revision: D20669675
fbshipit-source-id: 897ec10ee
Summary:
The text is ambiguous because it sounds as if it recommends annotating the current class as `ThreadSafe`, not the interface invoked.
Also, remove the not useful part "or using an interface known to be thread-safe" because developers don't know in general what interfaces Infer thinks are thread-safe.
Reviewed By: skcho
Differential Revision: D20675729
fbshipit-source-id: 9da438621
Summary:
Morally, INTERFACE_NOT_THREAD_SAFE is issued when an interface method is invoked from `ThreadSafe`-annotated code on an interface that is not known to be thread-safe or annotated so.
However, the ultimate purpose is to prevent races. Thus it should never be issued on an owned object or on objects we would not report races on for any reason (local variables, non-source variables, etc).
This diff equips interface call records with the abstract address they are invoked on, and uses the same rules for maintaining those records or not.
Reviewed By: skcho
Differential Revision: D20669259
fbshipit-source-id: 6c7841e6a
Summary:
For historical reasons, the record of an access is a three-level record:
1. `AccessSnapshot`, a record with info such as ownership and lock status, including
2. `TraceElem`, a record with a trace and an element which is
3. Access, the abstract addressed accessed and the type of access.
This stack flips the order to 2, 1, 3, leading up to the possibility of merging 1 and 3.
This diff improves the domain interface and consolidates all the various validity invariant checking for accesses inside their constructors.
Reviewed By: skcho
Differential Revision: D20668611
fbshipit-source-id: 45806d40d
Summary:
For historical reasons, the record of an access is a three-level record:
1. `AccessSnapshot`, a record with info such as ownership and lock status, including
2. `TraceElem`, a record with a trace and an element which is
3. Access, the abstract addressed accessed and the type of access.
This stack flips the order to 2, 1, 3, leading up to the possibility of merging 1 and 3.
This diff inverts 2 and 1.
Reviewed By: skcho
Differential Revision: D20644100
fbshipit-source-id: 89d810b68
Summary:
For historical reasons, the record of an access is a three-level record:
1. `AccessSnapshot`, a record with info such as ownership and lock status, including
2. `TraceElem`, a record with a trace and an element which is
3. `Access`, the abstract addressed accessed and the type of access.
This stack flips the order to 2, 1, 3, leading up to the possibility of merging 1 and 3.
This diff introduces functions in (1) that mask calls to (2), making the flip easier.
Reviewed By: skcho
Differential Revision: D20619614
fbshipit-source-id: 19fda0916
Summary: In an intra-procedural analysis we assume that parameters passed by reference to a function will be initialized inside that function. We use the type information of an actual parameter to initialize the fields of the struct. This does not work if a function has a parameter of type void* as the actual parameters also has type void*. To solve this issue, we use type information from local variables.
Reviewed By: jvillard
Differential Revision: D20670253
fbshipit-source-id: dc9f051ef
Summary:
This diff adds a procedure name to the head of the trace in order to distinguish issues in the same line.
"Updated Cost is ..." is changed to "Updated Cost of <proc name> is ..."
Reviewed By: ezgicicek
Differential Revision: D20672214
fbshipit-source-id: 303b4492f
Summary:
- Model `System.exit()` as early_exit and add a test
- Tweak message of methods that are impure due to having no pulse summary (and add a test)
Reviewed By: skcho
Differential Revision: D20668979
fbshipit-source-id: 6b5589aae
Summary:
Introducing a generalization of map_changed that can now
use a context on each instruction. The context is computed with
the previous instructions in the collection.
Reviewed By: skcho, jvillard
Differential Revision: D20669993
fbshipit-source-id: 58fdee1d9
Summary: This diff avoids that an invalid interval value, e.g. [0, -1], is genrated by interval pruning.
Reviewed By: ezgicicek
Differential Revision: D20645488
fbshipit-source-id: 6516c75d1
Summary:
Hopefully no one uses this. This is in Python and we'd like to get rid
of it. Easy enough to either re-implement if needed or to be
re-implemented by a third party.
Reviewed By: ngorogiannis
Differential Revision: D20626344
fbshipit-source-id: 484022482
Summary:
Seems like a more sensible name. Most tooling should read report.json so
won't notice.
Still output a bugs.txt file with a message to point to report.txt while
people migrate.
Reviewed By: mityal, artempyanykh
Differential Revision: D20626111
fbshipit-source-id: efb84d098
Summary:
The documentation of `--quiet` dates back from when it applied only to
`InferPrint.ml`. Make it more general and more in line with
expectations one might have about a `--quiet` option:
- change the doc
- make it disable the progress bar
Reviewed By: ngorogiannis
Differential Revision: D20626110
fbshipit-source-id: db096fd31
Summary:
This is a fairly popular class that have bunch of nullable methods.
Providing an alternative will make an error message actionable.
Note that this involves some duplication, and the whole API could be
improved. But let's leave it for future improvements.
Reviewed By: jvillard
Differential Revision: D20649099
fbshipit-source-id: bfcc7fd95
Summary: The current message is recommending to change `View.findViewById()` to `View.requireViewById()`, but the latter method is not supported in all API, so might lead to a crash in runtime.
Differential Revision: D20619361
fbshipit-source-id: 542746c79
Summary: Use the an LRUCache in Ondemand.LocalCache to avoid clearing it after every toplevel analysis.
Reviewed By: ngorogiannis
Differential Revision: D20281932
fbshipit-source-id: 752c8e1ea
Summary:
- the order of call state was wrong when printing contradiction for CItv
- add a test for impurity
Reviewed By: jvillard
Differential Revision: D20646181
fbshipit-source-id: 1c86fd0a4
Summary: There are no plans currently to track which lock protects each access, so reduce to the functional equivalent of having a singleton lock domain.
Reviewed By: skcho
Differential Revision: D20595013
fbshipit-source-id: d5100ac49
Summary:
As exemplified by added tests, pulse computes an empty summary (with 0 disjuncts) whenever it discovers a contradiction which might be caused by:
- discovering aliasing in memory
- widening limited number of times in loops and concluding that loop exit conditions are never taken
However, AFAIU, it is not possible to have a function with 0 disjunct apart from such anomalities. Even a function which does nothing like `void foo(){}` has 1 disjuncts:
```
Pulse: 1 pre/post(s)
#0: PRE:
{ roots={ };
mem ={ };
attrs={ };}
POST:
{ roots={ };
mem ={ };
attrs={ };}
SKIPPED_CALLS: { }
```
The aim of this diff is to consider functions with 0 disjuncts as **impure** because most often such cases are impure, rather than actually pure.
Reviewed By: skcho
Differential Revision: D20619504
fbshipit-source-id: 3a8502c90
Summary:
Although try-with-resource is supported by nullsafe this code pattern
throws it off and make nullsafe report on a virtual **b**yte-**c**ode
variable.
Check out debug output from `TryWithResource` (or attached
visualisation of CFG):
0. node14: $bcvar2=null (on entry to try-with-resource).
1. node16: n$14=$bcvar2, but **also** PRUNE(!(n$14 == null), true). Then we go to
2. node18: do something here and in case of exception go to
3. node25->node23->node19->node20: and here we do
$bcvar2->addSuppressed(...).
Because on step 1 we refined nullability of n$14, but didn't refine
nullability of $bcvar20, on step 3 we are sure that $bcvar is null and
therefore issue an error.
Reviewed By: mityal
Differential Revision: D20558343
fbshipit-source-id: 520505039
Summary:
This is likely not the final refinement, rather one step forward.
We classify all classes by 3 categories:
- Nullsafe and 0 issues
- can add Nullsafe and will be 0 issues
- the rest (class needs improvement)
Each class will fall into exactly one category.
Error messaging is WIP, they are not intended to be surfaced to the user
just yet.
Note how this diff uses the result of the previous refactoring.
Reviewed By: artempyanykh
Differential Revision: D20512999
fbshipit-source-id: 7f462d29d
Summary: Add a flag `is-inclusive-cost` (`true` by default) which computes inclusive cost for each function. Setting the flag to `false` computes exclusive cost of the function where the cost of the callees are assumed to be `0`.
Reviewed By: skcho
Differential Revision: D20558275
fbshipit-source-id: 6b5798916
Summary:
This function is used to adapt the callee summary at a call site. It did two things for every domain element in the callee summary:
- A linear search through the list of actuals.
- For each such actual, it would (repeatedly) compute its ownership (!).
For large summaries this can be substantial. The right way is to precompute the ownership for all actuals once and then simply retrieve it (via an array).
Reviewed By: jberdine
Differential Revision: D20564447
fbshipit-source-id: 1ca3121c2
Summary: The attribute types present are exclusive, so sets are not needed for the attribute map domain. This changes `Attribute` to a flat domain and removes the set on top of that.
Reviewed By: jberdine
Differential Revision: D20560240
fbshipit-source-id: 83e59d73e
Summary:
Both modules define properties the analysis maps to addresses, there is no reason to have two modules for this.
Also remove an instance of `Caml.Not_found` usage.
Reviewed By: jberdine
Differential Revision: D20558683
fbshipit-source-id: eacafd780
Summary:
# Problem
Consider
```
some_method(Object a) { a.deref(); }
```
What is nullability of `a` when we dereference it?
Logically, things like "LocallyCheckedNonnull" etc are not applicable
here.
This would be applicable if we called some_method() outside! But not
inside. Inside the function, it can freely treat params as non-null, as
long they are declared as non-nullable.
The best we can capture it is via StrictNonnull nullability.
Reviewed By: artempyanykh
Differential Revision: D20536586
fbshipit-source-id: 5c2ba7f0d
Summary:
# Problem
Yes, nullsafe is not null-safe, such an irony.
ErrorRenderingUtils overuses `option` and `let+` constructions. Most of
internal functions can return `None` when "something is wrong".
On top of this, "default" pattern match is overused either.
Because of this, `ErrorRenderingUtils.mk_nullsafe_special_issue` returns
optional type. In practice, this result can be None for many unclear
reasons, and it is super tricky to even understand them all.
This in turn forced AssignmentRule and DereferenceRule to process this
None is defensive way. The rules have some theory why None was returned,
and have assertions along the way.
Turns out those theories might be wrong. This diff will make triaging wrong assumptions easier.
Reviewed By: artempyanykh
Differential Revision: D20535720
fbshipit-source-id: 2b81e25b7
Summary: When we have clashing args to bug (for instance -j and -Xbuck --num-threads) CLI passed -Xbuck args should win.
Reviewed By: jvillard
Differential Revision: D20557060
fbshipit-source-id: 726fc501a
Summary:
`make test` failed in some test directories, because we were getting warnings
```
Foo.java uses unchecked or unsafe operations.
```
This diff fixes or suppresses these warnings.
Reviewed By: skcho
Differential Revision: D20557572
fbshipit-source-id: 63ecd3dfa
Summary:
First version of a new memory leak check based on Pulse. The idea is to examine unreachable cells in the heap and check that the "Allocated" attribute is available but the "Invalid CFree" isn't. This is done when we remove variables from the state.
Currently it only works for malloc, we can extend it to other allocation functions later.
Reviewed By: jvillard
Differential Revision: D20444097
fbshipit-source-id: 33b6b25a2
Summary:
- Add more naive pulse models for:
- `System.arraycopy`
- `StringBuilder.setLength`
- `StringBuilder.delete`
- Model the following as pure
- `SparseArrayCompat.valueAt`
- `File.get...`
- Add a nice test
Reviewed By: jvillard
Differential Revision: D20513397
fbshipit-source-id: 6d412d13a
Summary:
`to_reportable_violation` is responsible for identifying if the
violation is reportable in this mode or not.
This logic is higly coupled with other functions in
`ReportableViolation`, such as `get_description`: You can not have
sensible description on the violation that is NOT reportable in a given
mode.
So from logical perpsective, creation of `ReportableViolation.t` should
belong to this module itself, not to the parent `Rule` module.
This change will make design clearer.
Reviewed By: artempyanykh
Differential Revision: D20511756
fbshipit-source-id: ef27b5057
Summary:
This diff finishes work in D20491716.
We removed dependency on nullsafe mode for field initialization in
D20491716, so this diff just formalizes it.
Reviewed By: jvillard
Differential Revision: D20493164
fbshipit-source-id: 6ac612e78
Summary:
This diff continues work in D20491716.
This time for Inheritance Rule.
Reviewed By: jvillard
Differential Revision: D20492889
fbshipit-source-id: c4dfd95c3
Summary:
This diff continues work in D20491716.
This time for Dereference Rule.
Reviewed By: jvillard
Differential Revision: D20492296
fbshipit-source-id: ff7f824f9
Summary:
# Problem
In current design, Rules (assignment rule, dereference rule, inheritance
rule) decide, depending on the mode, wether the issue is legit or not.
If the issue is not actionable for the given mode, it won't be created
and registered.
For meta-issues, we want to be able to do smart things like:
- Identify if we can raise strictness of the mode without
introducing new issues
- Classify classes on "clean" vs "broken", taking into account issues
that are currently invisible.
# Solution
In the new design:
1. Rules are issuing violations independently of mode. This makes sense
semantically. Mode is "level of trust we have for suspicious things",
but the thing does not cease to be suspicious in any mode.
2. Each Rule decides if it is reportable or not in a given mode.
3. `nullsafe_mode` is passed to the function `register_error`, that 1)
adds error so it can be recorded in summary for file-level analysis
phase 2) reports some of them to the user.
# This diff
This diff converts only AssignmentRule, follow up will include
conversion of other rules, so no issue encapsutes the mode.
Reviewed By: jvillard
Differential Revision: D20491716
fbshipit-source-id: af17dd66d
Summary:
`make deadcode` is failing on master but our CI jobs didn't catch it :(
Let's fix existing deadcode for now.
Reviewed By: martintrojer
Differential Revision: D20510062
fbshipit-source-id: 4a5e5f849
Summary:
Previously, at each function call, we added a `WrittenTo` attribute for applying the address of the actuals. However, this results in mistakenly considering each function application that inspects its argument as impure. Instead, we should only propagate `WrittenTo` if the actuals have already `WrittenTo` attributes.
For instance, for the following functions
```
public static boolean is_null(Byte a) {
return a == null;
}
public static boolean call_is_null(Byte a) {
return is_null(a);
}
```
We used to get the following pulse summary for `call_is_null` (showing only one of the disjuncts):
```
#0: PRE:
{ roots={ &a=v1 };
mem ={ v1 -> { * -> v2 } };
attrs={ v1 -> { MustBeValid },
v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) } };}
POST:
{ roots={ &a=v1, &return=v8 };
mem ={ v1 -> { * -> v2 }, v8 -> { * -> v4 } };
attrs={ v2 -> { Arith =null,
BoItv ([max(0, v2), min(0, v2)]),
WrittenTo-----------WRONG },
v4 -> { Arith =1,
BoItv (1),
Invalid ConstantDereference(is the constant 1),
WrittenTo-----------WRONG },
v8 -> { WrittenTo } };}
SKIPPED_CALLS: { }
```
where we mistakenly recorded a `WrittenTo` for `v2` (what `a` points to). As a result, we considered `call_is_null` as impure :( This diff fixes that since the callee `is_null` doesn't have any `WrittenTo` attributes for its parameter `a`. So, we don't propagate `WrittenTo` and get the following summary
```
#0: PRE:
{ roots={ &a=v1 };
mem ={ v1 -> { * -> v2 } };
attrs={ v1 -> { MustBeValid },
v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) } };}
POST:
{ roots={ &a=v1, &return=v8 };
mem ={ v1 -> { * -> v2 }, v8 -> { * -> v4 } };
attrs={ v2 -> { Arith =null, BoItv ([max(0, v2), min(0, v2)]) },
v4 -> { Arith =1,
BoItv (1),
Invalid ConstantDereference(is the constant 1) },
v8 -> { WrittenTo } };}
SKIPPED_CALLS: { }
```
Reviewed By: skcho
Differential Revision: D20490102
fbshipit-source-id: 253d8ef64
Summary:
Make all arguments named and move function from `Procname.Java` to `Procname`, and making it return a `Procname.t` as opposed to `Procname.Java.t` (all callers want a `Procname` eventually).
Various other small fixes in the callers.
Reviewed By: skcho
Differential Revision: D20492305
fbshipit-source-id: e646cc799
Summary: These tests fail when seemingly unrelated changes are made to infer. In particular, it seems timeout limits have to be increased by 10x or more to make them succeed again. Disabling until we have a more stable replacement.
Reviewed By: ezgicicek
Differential Revision: D20489647
fbshipit-source-id: 9706b0807
Summary:
This diff naively models the following as `StdVector.push_back`:
- `StringBuilder.append`
- `String.replace`
- `Queue.poll`
It also adds a FN test for `Iterator.next`.
Reviewed By: skcho
Differential Revision: D20469786
fbshipit-source-id: 2d8e8d117
Summary:
This diff is doing three things:
1. Finishes work paved in D20115024, and applies it to nullsafe. In that diff, we hardened API for
file level analysis. Here we use this API in nullsafe, so now we can
analyze things on file-level, not only in proc-level like it was before!
2. Introduces a class-level analysis. For Nullsafe purposes, file is not
an interesting granularity, but we want to analyze a lot of things on
file level. Interesting part here is anonymous classes and how we link
them to their corresponding user-defined classes.
3. Introduces a first (yet to be improved) implementation of class-level
analysis. Namely it is "meta-issues" that tell what is going with class
on high level. For now these are two primitive issues, and we will
refine them in follow up diffs. They are disabled by default.
Follow ups include:
1. Refining semantics of meta-issues.
2. Adding other issues that we could not analyze before or analyzed not
user friendly. Most importantly, we will use it to improve reporting for
FIELD NOT INITIALIZED, which is not very user friendly exactly because
of lack of class-level aggregation.
Reviewed By: artempyanykh
Differential Revision: D20417841
fbshipit-source-id: 59ba7d2e3
Summary: The `FN_loop2` was not actually FN because infer analyzes its complexity as degree 1 correctly.
Reviewed By: dulmarod
Differential Revision: D20468367
fbshipit-source-id: 9e4c19415
Summary: The `iterate_over_mycollection_quad_FN` was not actually FN because infer analyzes its complexity as degree 2 correctly. So, this diff removed `_FN` from there.
Reviewed By: ezgicicek
Differential Revision: D20467398
fbshipit-source-id: b10340612
Summary: There has never been a sufficient formal basis for soundness nor completeness of reports on locals. This diff changes the domain to effectively concern only expressions rooted at formals or globals.
Reviewed By: ezgicicek
Differential Revision: D19769201
fbshipit-source-id: 36ae04d8c
Summary: `Object.clone` modeled as pure until the analysis can distinguish returning a fresh object vs. having no side-effects.
Reviewed By: skcho
Differential Revision: D20439998
fbshipit-source-id: 421054cfb
Summary:
As ngorogiannis pointed out, we never expect whitespaces in classname, so
stripping makes no sense here in best case, and hides a bug under rug in
worst case.
Reviewed By: jvillard
Differential Revision: D20417033
fbshipit-source-id: bc7449171
Summary: Let's also print skipped calls in `pp` to ease debugging both for summary and intermediate steps.
Reviewed By: jvillard
Differential Revision: D20417852
fbshipit-source-id: 7da03ae81
Summary:
There is a module and a module type in the file PulseAbductiveDomain.ml
with the same name. This is confusing and it's better to keep separate names.
Reviewed By: jvillard
Differential Revision: D20388769
fbshipit-source-id: bcfed436e
Summary:
Be a bit more careful about the difference between PrePost.t and
AbductiveDomain.t. It's needed in another diff where the types will be
different.
Reviewed By: ezgicicek
Differential Revision: D20393927
fbshipit-source-id: beaf80c90
Summary: In preparation for PulseArithmetic to be something else.
Reviewed By: ezgicicek
Differential Revision: D20393928
fbshipit-source-id: d93131e12
Summary:
`JavaSplitName` is used to represent Java types (in `Procname` in particular). The type itself is a pair of string (an optional package qualifier) and a "type name" (the quotes are there because it may contain array qualifiers).
For example `java.lang.Object[][]` should be represented as
```
{package=Some "java.lang"; typename="Object[][]"}
```
The constructor `make` was misused to construct instead types such as
```
{package=None; typename="java.lang.Object[][]"}`
```
This is evident when we print the return type of a `Procname` non-verbosely (the default), but we still see the package qualifier.
Obviously this is not just a pretty-printing bug, the values were themselves wrong.
The fix is to use the `of_string` constructor which will parse the package and separate it correctly. Another bug (in response to this one) had to be fixed in `Procname.is_vararg` to maintain behaviour in Nullsafe and Quandary.
Reviewed By: mityal
Differential Revision: D20394146
fbshipit-source-id: 4633902eb
Summary:
We will use it in follow up diffs.
From many perspectives, if the function belongs to an anonymous class,
it is useful to know the original user-defined class.
This function makes this distinction clear.
Thanks to ngorogiannis, whos work on refactoring `Typ.name` made this module
easy enough so we can introduce unit tests!
Reviewed By: ngorogiannis
Differential Revision: D20389311
fbshipit-source-id: 408d95660
Summary: `Procname.Java.get_return_typ` is buggy because whenever faced with an array of objects, it returns a type that implies the object is stored by value in the array (this is correct behaviour only when the element type is primitive, not when it's an object type).
Reviewed By: ezgicicek
Differential Revision: D20384403
fbshipit-source-id: d91322d3a
Summary:
We try to consolidate Java-specific stuff in JavaClassName.
Let's introduce the function in JavaClassName and make it clear that
its analog in Typ.Name.Java one throws if called on a wrong type.
Reviewed By: ngorogiannis
Differential Revision: D20386357
fbshipit-source-id: a1577ef8b
Summary:
Impurity domain was tracking all changes to variables (with a list of traces that containing all write/invalid accesses). This results in having long traces with multiple access events for the same variable. For instance,
```
void swap_impure(int[] array, int i, int j) {
int tmp = array[i];
array[i] = array[j]; \\ included in the trace
array[j] = tmp; \\ included in the trace
}
```
here we recorded both array accesses.
This diff changes the domain to include accesses so that we only keep track of a single trace per access. Array accesses are only recorded once.
Note that we want to record all unique accesses, not just the first one, because impurity will be used for hoisting/cost where we will invalidate impure arguments and consider all the rest as not changing.
Reviewed By: jvillard
Differential Revision: D20385745
fbshipit-source-id: d3647dad3
Summary:
D20362149 missed
- to pass the optional argument `include_value_history` to the recursive call in `PulseTrace.add_to_errlog`.
- to set `include_value_history=false` for skipped calls.
This diff fixes these issues.
Reviewed By: skcho
Differential Revision: D20385604
fbshipit-source-id: 176e4d010
Summary: No need to load the contents of the whole file(s) as a string first.
Reviewed By: ngorogiannis
Differential Revision: D20362602
fbshipit-source-id: 46fbc3693
Summary:
Next step in moving logic from make to dune. Since dune understands
build rules with multiple targets we don't need to introduce
artificial pipelining as in make. Rules are pretty straightforward,
albeit somewhat verbose.
The tricky part here was adjusting deadcode detection.
Reviewed By: jvillard
Differential Revision: D20322605
fbshipit-source-id: 688e5f96f
Summary:
Main changes are:
1. Dune can promote targets into the source tree as a part of build. This
allows us to **remove custom promotion/installation logic in src/Makefile**.
2. Dune promotion only works for path within workspace. This required
**moving dune-workspace one folder up**: from infer/infer/src to infer/infer.
But this is not bad, since it makes it possible to migrate tests under dune at some point.
3. `checkCopyright` now also promoted into `infer/infer/bin` instead of
`infer/scripts` partly for consistency and partly because of the
dune-workspace location.
4. `byte` mode was replaced with `byte_complete`. The latter takes
similar amount of time to build compared to `byte`, but produces
standalone binaries that don't require InferCStubs to be
installed. This allowed to remove `dune_exec_shim` and custom logic
around `dune build InferCStubs.install` when dealing with byte
targets.
All in all, `infer/src/Makefile` is not about 2/3 its previous size
with less custom logic in Makefiles/scripts and more encoded in dune
build files.
Reviewed By: jvillard
Differential Revision: D20303902
fbshipit-source-id: 9e4c65bd0
Summary:
With the introduction of environments and profiles we no longer need
to generate most dune files in libraries via make. Also, those dune
builds don't need to be in OCaml.
In addition to converting build files to plain sexp definitions, this
patch also:
- Adjusts copyrightCheck to work correctly with sexp-based dune files.
- Adds auto-formatting for sexp-based dune files.
Reviewed By: jvillard
Differential Revision: D20250208
fbshipit-source-id: 495aeaa99
Summary: With plain/sexp dune files we need to support lisp style comments in checkCopyright
Reviewed By: jvillard
Differential Revision: D20366314
fbshipit-source-id: 04db9e3c1
Summary:
With profiles and `(env ...)` stanza it's possible to consolidate
various ocamlc/ocamlopt/etc setups in a single place.
Where previously we needed to append `dune.common` to every dune file
and specify `flags` and `ocamlopt_flags` now the flags are specified
in `env` and applied accross the board.
This allows to
1. simplify build definitions,
2. avoid the need to generate dune files,
3. use plain sexps instead of OCaml and JBuilder plugin in build
files.
(I'll try to address 2 and 3 in the followup patches).
Existing `make` targets should continue working as before. Also, we
can use dune CLI like so:
```
infer/src$ dune printenv --profile opt # <- very useful for introspection
infer/src$ dune build check
infer/src$ dune build check --profile test
infer/src$ dune build infer.exe --profile dev
infer/src$ dune build infer.exe --profile opt
```
Also, with just 1 context something like `dune runtest` will run unit
tests only once instead of N times, where N is the number of contexts.
Now, there's one difference compared to the previous setup with
contexts:
- Previously, each context had its own build folder, and building infer
in opt context didn't invalidate any of the build artifacts in default
context. Therefore, alternating between `make` and `make opt` had low
overhead at the expense of having N copies of all build artifacts (1
for every context).
- Now, there's just 1 build folder and switching between profiles does
invalidate some artifacts (but not all) and rebuild takes a bit more
time.
So, if you're alternating like crazy between profiles your experience
may get worse (but not necessarily, more on that below). If you want
to trigger an opt build occasionally, you shouldn't notice much
difference.
For those who are concerned about slower build times when alternating
between different build profiles, there's a solution: [dune
cache](https://dune.readthedocs.io/en/stable/caching.html).
You can enable it by creating a file `~/.config/dune/config` with the
following contents:
```
(lang dune 2.0)
(cache enabled)
```
With cache enabled switching between different build profiles (but
also branches and commits) has ~0 overhead.
Dune cache works fine on Linux, but unfortunately there are [certain
problems with
MacOS](https://github.com/ocaml/dune/issues/3233) (hopefully, those
will be fixed soon and then there will be no downsides to using
profiles compared to contexts for our case).
Reviewed By: jvillard
Differential Revision: D20247864
fbshipit-source-id: 5f8afa0db
Summary:
What was happening in that case is that a .inferconfig file containing `{ "myflag":
false }` used to be translated by CommandLineOption as `--no-` (`--no-<long>`),
because it picked the *non-deprecated* form of the option (here `myflag` would
have to be a deprecated form of the option since its non-deprecated form is
empty `""`). Instead, pick a non-empty form of the option.
Reviewed By: jberdine
Differential Revision: D20368784
fbshipit-source-id: 8e761e684
Summary:
This was never quite finished and inferbo has a new way to do sort of
the same thing.
Reviewed By: skcho, ngorogiannis
Differential Revision: D20362619
fbshipit-source-id: 7c7935d47
Summary: Just for fun, and because killing InferPrint.ml is just so satisfying.
Reviewed By: ngorogiannis
Differential Revision: D20362643
fbshipit-source-id: 039cfec61
Summary:
Now that this module only prints report.json and costs_report.json, we
can dis-entangle the whole callback spaghetti.
Reviewed By: ngorogiannis
Differential Revision: D20362640
fbshipit-source-id: 56ffa4e08
Summary:
At this point in the stack, here's what's left in InferPrint.ml:
1. how to output report.json and costs_report.json
2. how to print summaries from the command line (`infer report`)
3. how to print --issues-tests stuff (`infer report --issues-tests`)
Keep only 1. in there. 2. goes to SpecsFiles.ml directly from infer.ml,
and 3. goes to its own module (also the fields to output in
--issues-tests get a non-poly variant).
1. does some extra stuff sometimes, eg in test-determinator mode. Keep
this for now.
Reviewed By: ngorogiannis
Differential Revision: D20362642
fbshipit-source-id: 0d9f0e8e2
Summary:
Make <infer-out>/report.json the default value for this option, as this
is what is used 99% of the time. Clean up test options using this.
Reviewed By: ngorogiannis
Differential Revision: D20362644
fbshipit-source-id: a1bb18757
Summary:
InferPrint hasn't been in charge of writing bugs.txt since forever.
This will be re-implemented as a post-processing of report.json instead
(like it is now, but in OCaml instead of python).
Reviewed By: ngorogiannis
Differential Revision: D20362641
fbshipit-source-id: 83d8cb53d
Summary:
I don't think anyone uses this. Meta-goal: cleaning up InferPrint.ml.
Measuring stats about summaries is good in principle, but we should do
it somewhere else instead of in the InferPrint callback hell. For
instance when we record each summary. Meanwhile, delete this.
Reviewed By: ngorogiannis
Differential Revision: D20362639
fbshipit-source-id: c73d431a5
Summary:
Adding a model for malloc: we add an attribute "Allocated". This can be used for implementing memory leaks: whenever the variables get out of scope, we can check that if the variable has an attribute Allocated, it also has an attribute Invalid CFree.
Possibly we will need more details in the Allocated attribute, to know if it's malloc, or other allocation function, but we can add that later when we know how it should look like.
Reviewed By: jvillard
Differential Revision: D20364541
fbshipit-source-id: 5e667a8c3
Summary:
This is not a full cleanup, but it is better than nothing.
At least `callback2` won't trigger me each time I see it anymore.
Reviewed By: jvillard
Differential Revision: D20364812
fbshipit-source-id: 8f25c24ad
Summary: Impurity traces are quite big due to recording values histories. Let's simplify the traces by removing pulse's value histories.
Reviewed By: skcho
Differential Revision: D20362149
fbshipit-source-id: 8a2a6115e
Summary: Type is not enough to say a function call of `Provider.get` is expensive or not.
Reviewed By: jvillard
Differential Revision: D20366206
fbshipit-source-id: 83d3e8741
Summary:
This diff uses a type parameter of `Provider.get` to decide whether assigning expensive cost to the
function call or not. For example, if the type is small one like `Provider<Integer>`, it be
evaluated to have a unit cost, otherwise a linear cost.
To get the return type of `Provider.get`, I added a simple analyzer that collects "casted" types
backwards. In Sil, while the function call statement loses the return type, e.g,
```
n$5=_fun_Object Provider.get()(n$3:javax.inject.Provider*);
```
the `n$5`'s value is usually casted to a specific type at some point later.
```
*&$irvar0:java.lang.Object*=n$5
n$8=*&$irvar0:java.lang.Object*
n$9=_fun___cast(n$8:java.lang.Object*,sizeof(t=java.lang.Integer;sub_t=( sub )(cast)):void)
```
So, the analyzer starts from the cast statements backward, collecting the types to cast for each
variables.
Reviewed By: ezgicicek
Differential Revision: D20345268
fbshipit-source-id: 704b42ec1
Summary:
The previous diff finally unblocks this important milestone.
Now we have only one place when `convert_complex_exp_to_pvar` needs to
modify the typestate (in Sil.Load typechecking).
Because the only case left is when `~is_assignment: false`, we also can
simplify logic of updating the typestate (remove dependency on
`is_assignment`, and rename the methods so they more clearly say what
they do (instead of vague "update_typestate").
This diff, in turn, unblocks further refactoring. Namely, remove this
remaining usage of
`convert_complex_exp_to_pvar_and_register_field_in_typestate` from
Sil.Load instruction so that there is no tricky field magic left!
We will try doing it in follow up diffs.
Reviewed By: artempyanykh
Differential Revision: D20334924
fbshipit-source-id: 20ce185ed
Summary:
When assigning to field `field = expr()` we need to compare actual
nullability of `expr()` (rhs) with formal nullability of field (lhs).
Formal nullability is based on field declaration.
Before this diff lhs nullability was calculated based on actual
nullability of lhs. This is an absolutely wrong thing to do!
E.g. `field = null` would update nullability of field in typestate, and
from this field will be considered as nullable, so next time field =
null is allowed...
Due to series of hacks pile on top of each other, this wrong behavior
actually works correctly; but this depends on completely wrong things
happening in other places of the program (e.g. typestate modifies in
wrong places to make this work!).
This diff unblocks refactoring that will clean up hacks mentioned above,
and simplify typechecking logic.
Reviewed By: artempyanykh
Differential Revision: D20334925
fbshipit-source-id: 8bbcbd33a
Summary: The macro is dead. It had been used when Inferbo had include-based C++ models.
Reviewed By: jvillard
Differential Revision: D20309031
fbshipit-source-id: bcfd8f923
Summary:
Warning: This might be a bit brutal.
PerfStats and EventLogger are pretty much subsumed by `ScubaLogging`.
It seems no one has been looking at the data they generate recently.
Let's delete them! If we need to re-implement some parts later on, let's
do that using `ScubaLogging`, which is better (eg, still produces data
when infer crashes).
Things we lose:
- errors in the clang frontend due to missing decl translation, etc.
- errors in biabduction due to timeouts, functions not found, etc.
We could also re-implement these using BackendStats and ScubaLogging
instead of brutally deleting everything.
Reviewed By: ngorogiannis
Differential Revision: D20343087
fbshipit-source-id: 90a3121ca
Summary:
At some point we thought disconnected CFGs (where some nodes are not
reachable from the initial node) were signs of bugs in our frontend, but
it turned out not to be the case. Thus, we compute the boolean "is
connected" for each procdesc for the only purpose of logging that
uninteresting piece of information.
Delete it.
Reviewed By: ngorogiannis
Differential Revision: D20342834
fbshipit-source-id: 3f9317003
Summary:
The goals are to have all the checker definitions and documentation in one
place (except how to actually run them, since that's not quite the same
concept; for example inferbo is one checker but several analyses depend on its
symbolic execution), and later on to be able to link issues reported by infer
back to the checker that generated them.
This makes apparent that the documentation of our checkers is lacking,
not touching that in this diff.
Not sure if "analysis" would be a better name than "checker" at this
point? For instance "Linters" is one of the checkers, which historically
at least we have not considered to be the case.
Reviewed By: mityal
Differential Revision: D20252386
fbshipit-source-id: fc611bfb7
Summary:
Some options are deprecated and this is indicated with `~long:""`. But for
boolean options this creates a spurious `"--no-"` flag. Detect when the option
has an empty flag and don't create the "no" version in that case.
Reviewed By: ngorogiannis
Differential Revision: D20286830
fbshipit-source-id: 9a2095ea8
Summary: This diff adds a model for Java's `Object.clone()` method (similar to existing shallow_copy).
Reviewed By: jvillard
Differential Revision: D20341073
fbshipit-source-id: 30ae40fe7
Summary:
Some (all?) of this is already tested in other tests, but this feature
is important enough (and the implementation is scattered accross the
whole code), so I found it useful to have a small test that ensures the
very basic things are working as expected.
See `NestedFieldAccess.java` that tests far more advances things, but
here we focus only very basic things: conditions, local variable
assignments, and explicit assignments.
Reviewed By: jvillard
Differential Revision: D20339056
fbshipit-source-id: a6cfd0043
Summary:
A java byte is not a short and a java character is not a C character. Fix those types by mapping them to what the spec ordains.
An extra advantage is that this establishes a bijection between java types and their project in the `sil` type system, so pretty printing in Java mode can actually be made to work.
Reviewed By: mityal
Differential Revision: D20330525
fbshipit-source-id: 00ac2294b
Summary:
- ignore `ConstantDereference` invalidations since they just represent assignments to constants.
- add `impurity.mli`
- split `extract_impurity` into several sub functions.
Reviewed By: jvillard
Differential Revision: D20335674
fbshipit-source-id: f0fd6b5f4
Summary:
1. Log cases when we fall back to default while typechecking (we aim to
gradually reduce their usage)
2. Log high level operations when checking field assignment
Reviewed By: ngorogiannis
Differential Revision: D20334923
fbshipit-source-id: 80c45b29e
Summary:
Experiment show that we did not rely on fact that this function could modify
typestate.
Reviewed By: artempyanykh
Differential Revision: D20285198
fbshipit-source-id: dc20f4b4b
Summary:
Previous diff introduced convert_complex_exp_to_pvar that does not
modify typestate.
Luckily enough, experiement shows that we don't need it in this place!
Reviewed By: artempyanykh
Differential Revision: D20284942
fbshipit-source-id: ea1471681
Summary:
This function is converting exp to pvar AND sometimes modifies a
typestate (even when ~is_assignment is false, which is something one
would not expect!).
We aim to reduce cases when it is not needed.
This diff splits the function into two: good and evil, and uses good
when it is a no-op.
Reviewed By: ngorogiannis
Differential Revision: D20284301
fbshipit-source-id: 0e5d65a65
Summary:
Extract `Typ.Name.Java.Split` into a standalone module.
- This module is really only used in `Procname` so no need to be in `Typ`.
- Remove some pointless conversions to strings and back.
- Reduce the interface of `Split` to the minimum ahead of possible removal in favour of normal types.
Reviewed By: mityal
Differential Revision: D20322887
fbshipit-source-id: 7963757cb
Summary:
- Use `Typ` constants instead of constructors for basic types.
- Nest single-use unexported functions at the point of use.
- Improve exception safety wrt `Not_found` exceptions by preferring `_opt` functions.
- Simplify deeply nested `match` statements by pushing conditionals to `when` clauses when possible.
Reviewed By: skcho
Differential Revision: D20304392
fbshipit-source-id: edbc08219
Summary:
- Remove dead argument in function in JMain.
- Document order of constructed classpath.
- Stop asking repeatedly for the cwd in `add_source_file`.
- Improve exception safety and readability in `load_from_verbose_output`.
Reviewed By: ezgicicek
Differential Revision: D20290519
fbshipit-source-id: 86c32dcdf
Summary:
Problem: `infer report <specs file name>` is called manually sometimes to see analysis results in CLI. However, giving the specs file name is sometimes annoying, because the specs file name may be quite long and include special characters sometimes.
This diff introduces `--procedures-summary` to lookup the summaries interactively in `infer explore`.
example1: There are 8 procedures that include "max" in their names, then I selected one of them by entering a number.
```
$ infer explore --procedures --procedures-filter '.*max.*' --procedures-summary
0: minmax_div_const2_Bad_FN
1: minmax_div_const_Good
2: use_int64_max_Bad
3: use_uint64_max_Good
4: use_int64_max_Good
5: minmax_div_const_Bad
6: minmax_div_const2_Good
7: use_uint64_max_Bad
Select one number (type 'a' for selecting all, 'q' for quit): 2
void use_int64_max_Bad()
Analyzed
ERRORS: BUFFER_OVERRUN_L1
WARNINGS:
FAILURE:NONE SYMOPS:0
BufferOverrunAnalysis: StackLocs: { } MemPure: { } Alias: { ret= }
BufferOverrunChecker: Safety conditions:
{ }
```
example2: If there is only one specs file that satisfies the given filter, it reports the summary of that procedure without an interaction.
```
$ infer explore --procedures --procedures-filter '.*add_in_loop_ok.*' --procedures-summary
Selected proc name: void ArrayListTest.add_in_loop_ok()
void void ArrayListTest.add_in_loop_ok()(ArrayListTest* this)
Analyzed
ERRORS:
WARNINGS:
FAILURE:NONE SYMOPS:0
BufferOverrunAnalysis: StackLocs: { } MemPure: { } Alias:
{ i=size(__new-390022197-0-1.elements), ret= }
LatestPrune: latest { i -> (5, { }, { }) by ((5, { }, { }) >= (5, { }, { })),
__new-390022197-0-1.elements -> (⊥, { }, { __new-390022197-1-1 -> length : 5 }) by ((5, { }, { }) >= (5, { }, { })) }
BufferOverrunChecker: Safety conditions:
{ }
```
Reviewed By: jvillard
Differential Revision: D20284052
fbshipit-source-id: 2131339f1
Summary:
Found a high number of `uname` syscalls while tracing infer. Figured it
must be the `Unix.gethostname` call. Stop continuously asking for the
hostname.
Reviewed By: jberdine
Differential Revision: D20309048
fbshipit-source-id: b8be1f2dc
Summary:
These are important enough operations to be tracked in logs.
This diff also tweaks logs for the main loop processing instuctions, so
that we log instr before processing it, not the reverse
Reviewed By: artempyanykh
Differential Revision: D20282443
fbshipit-source-id: 40b8b6627
Summary: The class map of biabduction models does not need to be part of the program type. This diff centralises all that in JModels module.
Reviewed By: jvillard
Differential Revision: D20283623
fbshipit-source-id: 5f95a7477
Summary:
- Factor out function that walks zip filename entries in jar file.
- Kill dead type (`classpath`) and record field (`classpath`).
- Make some string arguments named.
- Introduce function that folds over classnames in jar file and reduces occurrences of pattern "produce list, fold over it".
Reviewed By: artempyanykh
Differential Revision: D20245756
fbshipit-source-id: ccca47cdd
Summary: We don't need skipped calls for pre and post. Let's pull them out to `PulseAbductiveDomain`, next to pre and post.
Reviewed By: jvillard
Differential Revision: D20283589
fbshipit-source-id: 5cf970292
Summary: We forgot to take skipped calls into account for state comparison. This diff fixes that.
Reviewed By: skcho
Differential Revision: D20282739
fbshipit-source-id: 7b4d84bb0
Summary: Experiments suggest that infer does not take advantage of hardware threads and using more CPUs than the number of physical cores actually hurts performance. On Linux, `ProcessPool` now by default uses only the same number of workers as physical CPUs and pins them evenly.
Reviewed By: ngorogiannis
Differential Revision: D20193171
fbshipit-source-id: f8b9f55bf
Summary: Add the possibility of passing Scuba tagsets through the command line arguments.
Reviewed By: ngorogiannis
Differential Revision: D20262807
fbshipit-source-id: 9134cce8f
Summary:
It's a lot of code to maintain for something that no one ever uses
anymore.
Reviewed By: ngorogiannis
Differential Revision: D20282794
fbshipit-source-id: 28422c415
Summary: `PulseBaseDomain.leq` is never called but was there to satisfy the signature of `NoJoin` which itself was not needed. This diff removes `include NoJoin` and instead just adds signature for `pp` in `PulseBaseDomain`.
Reviewed By: jvillard
Differential Revision: D20280104
fbshipit-source-id: 8e3659280
Summary:
These were not used (and were actually activated byt the same config
param). They both are in experimental stage that never reached maturity.
Since the team does not have immediate plans to work on ObjC nullability
checker; and since "eradicate" (now known as nullsafe) is the main
solution for Java, removing it is sensible.
Reviewed By: jvillard
Differential Revision: D20279866
fbshipit-source-id: 79e64992b
Summary: The refactor from using 1 pipe for all worker-to-master communication to `n` (one per worker) introduced the possibility of starving workers because the master process read all the messages from one pipe (refreshing the file descriptors to read from with `Unix.select`) before moving to the next one. These changes aim to prevent that by reading one message from all available pipes before refreshing the file descriptors to read from.
Reviewed By: ngorogiannis
Differential Revision: D20194924
fbshipit-source-id: 91a0fbc47
Summary:
Invariant map of Inferbo, a map from node to abstract memory, is used in other checkers. In order to
avoid duplicated Inferbo analyses, it caches calculated invariant maps independently to summary
DB. The reason is that Inferbo's summary contains one abstract memory of the exit node, rather than
a map from all nodes to abstract memories.
This diff changes it to keep only one invariant map at a time. Since registered checkers are
applied to the same function one by one, usually the singleton cache should be enough to avoid the
duplicated Inferbo running. (I can think of a corner case when multiple checkers depend on
Inferbo's results and Inferbo's modeled functions are different to that of them, but it should work
in most of the cases.)
Reviewed By: jvillard
Differential Revision: D20248172
fbshipit-source-id: db86655d0
Summary:
Both TypeOrigin.Undef and TypeOrigin.OptimisticFallback are bad and
should be killed.
Let's start with Undef as the biggest offender, then try to gradually
reduce usage of the second one.
It is super unclear what does Undef even mean, and actually the code that
tries to use it (in a way that I can not fully comprehend) occurred to be "almost" no-op.
"Almost" means that the only place that is affected is
CONDITION_REDUNDANT checks: we have few extra (FP) warnings of his type.
Mostly those correspond to comparing with null result of array member
access: `myArray[i] == null` is marked as redundant. And I even don't
know how come it was not showing up before: we do assume all calls to
array are optimistically non-null (see TypeOrigin.ArrayAccess).
Anyways, we give up on this one: condition redundant is "broken" anyway
(has too many FP to be surfaced to the user); and when/if we want to fix
it, we can easily support array access idiomatically.
Reviewed By: jvillard
Differential Revision: D20248988
fbshipit-source-id: b20f61fd0
Summary: The classpath module doesn't need to know about model handling. Also, strengthen some invariants, use option types instead of strings, and hash sets instead of tree sets.
Reviewed By: skcho
Differential Revision: D20228873
fbshipit-source-id: 18b6bb276
Summary:
`TypeCheck.typecheck_node` is one of central parts in nullsafe
typechecking.
Lets make the code clearer:
1. Clear contract of the method - return a named record instead of a
tuple of lists.
2. Comments.
3. Making code functional, use List.fold and aggregate all needed data
there instead of storing information in references
4. Helper functions.
Reviewed By: skcho
Differential Revision: D20246273
fbshipit-source-id: 75f56497e
Summary:
This is the kind of property for which the previous syntax forced one to
use spurious registers.
Reviewed By: ngorogiannis
Differential Revision: D20118863
fbshipit-source-id: b49740d33
Summary:
See comment in the code.
Similarly to what we are already doing with RecentlyNullable, we should
treat this annotation exactly like NonNull.
Reviewed By: artempyanykh
Differential Revision: D20219284
fbshipit-source-id: 01f1127a6
Summary: This function uses uncompiled regexps plus it forgets to close the file when it finds a package declaration. Fix by using Core operations on strings.
Reviewed By: artempyanykh
Differential Revision: D20192957
fbshipit-source-id: 317caacea
Summary: When reporting CapturedStrongSelf we shouldn't report it when the block is "no escaping", as this won't lead to a retain cycle, so capturing strongSelf is ok.
Reviewed By: jvillard
Differential Revision: D20224359
fbshipit-source-id: c60dae333
Summary:
Update handling of `OffsetOfExpr` based on the new type definition
from updated version of clang-plugin.
Together with the change to clang-plugin, this essentially fixes hard
crash while analysing C/C++ files with non-literal `offsetof`
expression.
Fixes GH issues [#1178](https://github.com/facebook/infer/issues/1178), [#1212](https://github.com/facebook/infer/issues/1212)
Reviewed By: jvillard
Differential Revision: D20159173
fbshipit-source-id: 65fc228a4
Summary: Make the `ProcessPool` use one pipe per worker for worker-to-master communication.
Reviewed By: ngorogiannis
Differential Revision: D20158845
fbshipit-source-id: dc15607f8
Summary: Restore the global state also when `RestartScheduler.ProcnameAlreadyLocked` exceptions are catched.
Reviewed By: ngorogiannis
Differential Revision: D20189524
fbshipit-source-id: 8f8de5309
Summary:
This is so that all pre-analyses are together instead of spread across
several modules.
PS: this function is the worst.
Reviewed By: ngorogiannis
Differential Revision: D19973285
fbshipit-source-id: b326e99cd
Summary:
The check for whether a buck target needs quoting is incorrect, since it uses `-` inside a character class to denote a dash, not a character range. The correct way to do this is to put the dash as the first character in the class (or last).
Facebook
iknowthis_regex
Reviewed By: jberdine
Differential Revision: D20159112
fbshipit-source-id: be6750ed8
Summary:
This diff renames `ZERO_XXX` issues to more appropriately named and descriptive
`XXX_UNREACHABLE_AT_EXIT` and replaces bottom with
unreachable in cost kinds and issues.
Reviewed By: skcho
Differential Revision: D20140301
fbshipit-source-id: eb6076b30
Summary:
1. It is convenient to stick with the policy "ERROR if and only if it is
enforced". Among other, it makes CI integration much easier to implement
(enforcemend, UI and messaging is decided based on severity).
2. Since Nullsafe annotation is an idiomatic way to indicate classes
with enforced nullability checking, we want it to be the only way to
enforce issues.
3. This means we decrease the priority of GraphQL violation issues.
(In practice they were not enforced so we have plenty of violations in
codebase to reflect reality). The proper way dealing with GraphQL will
be detecting such issues as a special issue type and prioritizing fixing
and Nullsafe-ifying corresponding classes.
4. Among other, we downgrade severity of field overannotated to advice
to keep it consistent with condition redundant.
Reviewed By: artempyanykh
Differential Revision: D20141420
fbshipit-source-id: e2f12835a
Summary:
The issue type `ZERO_EXECUTION_TIME` actually corresponds to bottom state but has been mistakenly used to mean
- unreachable nodes (program never reaching exit state)
- having zero cost (e.g. for allocations).
Note that, for execution costs, the latter doesn't make sense since we always incur a unit cost for the start node. Hence, a function with empty body will have unit cost. For allocations or IO however, we only incur costs for specific primitives, so a function with no allocations/IO could have a zero cost. However, there is no point reporting functions with zero cost as a specific issue type. Instead, what we want to track is the former, i.e. functions whose cost becomes 0 due to program never reaching exit state.
This diff aims to split these cases into two by only reporting on the latter and adds traces to bottom/unreachable cost by creating a special category in polynomials.
Next diff will rename `ZERO_XXX` to `XXX_UNREACHABLE_AT_EXIT`.
Reviewed By: skcho
Differential Revision: D20005774
fbshipit-source-id: 46b9abd5a
Summary: When the progress bar was off (`--no-progress-bar`) the `TaskBar` didn't log updates but the workers still sent them to the master process. Now, the workers no longer send updates to the master process when the progress bar is off.
Reviewed By: ngorogiannis
Differential Revision: D20140577
fbshipit-source-id: 560d56991
Summary:
For Mode.Local this is kind of obvious decision.
But this diff does the same for strict mode as well.
See comment in [ExplicitNonnullThirdParty] for the detailed explanation.
Reviewed By: artempyanykh
Differential Revision: D20140056
fbshipit-source-id: 13c66df81
Summary:
In the previos diff we restructured error rendering utils for
TypeOrigin.MethodCall.
In this diff we do the same with TypeOrigin field: lets make the code
consistent.
We also clearly distinct third party from all other possible cases in
this branch.
This changes messaging and reported errors for strict modes (see test cases), and I believe this is a net improvement.
Reviewed By: artempyanykh
Differential Revision: D20139741
fbshipit-source-id: 84f502553
Summary:
Since artempyanykh introduced proper type for third party methods, we don't need
to write a sketchy heuristic in this place.
This will simplify shipping a feature in the follow up diff (otherwise
it would break here).
Reviewed By: artempyanykh
Differential Revision: D20139460
fbshipit-source-id: 00144dc48
Summary:
> We don't report when the cost is Top as it corresponds to subsequent 'don't know's. Instead, we
> report Top cost only at the top level per function
The previous code just ignored top costed nodes, so it was able to report a non-top cost that was
from another node. For example,
```
void foo() {
linear-cost();
top-cost();
}
```
It reported inconsistent reports: `EXPENSIVE_EXECUTION_TIME` with a linear cost and
`INFINITE_EXECUTION_TIME` at the same time.
This diff fixes it not to report `EXPENSIVE_EXECUTION_TIME` when there is a node with the top cost.
Reviewed By: ezgicicek
Differential Revision: D20139408
fbshipit-source-id: 9fedd4aec
Summary:
In the previous report, it reported the first cost of node that exceeds a threshold. However, this
may hide a bigger cost of node that appears later. This diff changes this to report the biggest
cost of node among the costs exceeding the threshold.
Reviewed By: ezgicicek
Differential Revision: D20116162
fbshipit-source-id: 06199fb46
Summary: No need to print the whole trace when there are other ways to view it.
Reviewed By: jberdine
Differential Revision: D20138515
fbshipit-source-id: 9765db2f0
Summary: The analysis time wall time was logged but not it wasn't a part of `BackendStats`. The analysis time has metric has been moved to `BackendStats` and also includes the user and sys times of the scheduler process.
Reviewed By: ngorogiannis
Differential Revision: D20115345
fbshipit-source-id: bd3f3d276
Summary:
Current domain of Inferbo cannot handle float values. This diff evaluates float constants to the top
interval.
Reviewed By: ezgicicek
Differential Revision: D20116361
fbshipit-source-id: e6e398bbd
Summary:
This syntax
- is less confusing (according to several people who are not me);
objectively, there's less magic under the hood
- gives fine control over register number (because condition/action are separated)
- lets one compare values of different arguments of the same call
(e.g., one could have a transition that is taken only if two
arguments of a method call are equal)
Reviewed By: ngorogiannis
Differential Revision: D20005403
fbshipit-source-id: fad8f3b3d
Summary:
The test shows what that TOPL can express, in addition to bugs,
efficiency properties. However, there seems to be an underlying problem
in biabdaction that prevents this particular problem from being caught.
Reviewed By: ngorogiannis
Differential Revision: D20005404
fbshipit-source-id: 466f79050
Summary:
# Current design
Infer analysis is currently two staged:
1) proc-level callbacks calculate summary, including writing down the
issues if applicable.
2) file-level callbacks (formerly cluster callbacks, see the prev diff) are executed next; they are supposed to emit
additional issues that are impossible to emit based on mere
proc-context.
Currently RacerD and Starvation use file-level callback; in near future
we plan to onboard Nullsafe checker as well.
# Problem
Contract of callback (1) is clear: given a proc and existing
summary, the checker updates it and returns a modified summary. This
summary later on gets serialized (in-memory + external) and can be consumed by
other chechers. Issues written in summary will get reported when
analysis is over.
In constrast, contract of (2) is wild west: the function returns unit.
In practice, what the checkers do is create IssueLog and serialize it to
checker-specific directory.
Then another part of program (InferPrint.ml) knows about this side
effect, reads the error log for checkers and ultimately get it reported
together with errors written at stage (1).
This is problematic because it is hard to reason about the system and it
makes onboarding new checkers to (2) error-prone.
# This diff
This diff brings (2) on par with (1): now file-level callback has a
clear contract: it should be side effect free, and the only
responsibility is to fill out and return IssueLog.
Additionally, we make the notion of "checker-specific issue directory"
an official thing, so the checker only needs to specify the name,
everything else will be made automatically by orchestation layer,
including cleanup.
# Starvation
Implementing the new contract is starvation is possible and desirable, but involved: see comment
in the code, so we leave it up to the future work to fix that.
Reviewed By: ngorogiannis
Differential Revision: D20115024
fbshipit-source-id: fb2f9b7e6
Summary: Add the wall time to the ExecutionDuration. If this is not included we are not considering off-cpu time.
Reviewed By: ngorogiannis
Differential Revision: D20099667
fbshipit-source-id: 49dbfd739
Summary:
Currently the call graph of all captured procedures is loaded and then traversed to flag reachable procedures from modified files, followed by deleting the unflagged part, and unflagging the rest. This is a bit wasteful, and doesn't lend itself nicely to constructing directly the reverse call graph, which further diffs will do.
This diff loads all captured procedures and callees in a hashconsed table, and performs a BFS from procedures in modified files, to build the call graph in one pass.
Reviewed By: fgasperij
Differential Revision: D19888965
fbshipit-source-id: eeb59356e
Summary:
To ease scheduling, it would be best to only load the procnames of procedures that are (a) defined and (b) reachable from the modified files. The frontends play various games with the DB properties:
- In Clang all methods have a CFG even if they are undefined. Also, looking for non-NULL CFG rows in the DB brings up methods unreachable from modified files (?).
- In Java, some procedures have NULL CFGs. In addition, some of those have `attr_kind!=0`.
We only load those procedures that have both non-NULL CFGs and `attr_kind!=0`. That seems to give meaningful numbers, esp. wrt reachable procedures from files.
Reviewed By: jberdine
Differential Revision: D20068376
fbshipit-source-id: 992b65b4a
Summary: The semantics of the `values` function of Java enum class was missing, when it is called outside the class initializer. This diff gets the size of the enum elements from the summary of class initializer function, `<clinit>`.
Reviewed By: ezgicicek
Differential Revision: D20094880
fbshipit-source-id: 7362bba1c
Summary: We had no tests that resulted in `ZERO_EXECUTION_COST`. Let's fix that.
Reviewed By: skcho
Differential Revision: D20097504
fbshipit-source-id: 56c23fea0
Summary:
1. Some invariants are tricky enough to be documented. This is especially
important for cases related with error reporting. Lets document it.
2. Cluster callback -> File callback rename.
Reviewed By: ngorogiannis
Differential Revision: D20093932
fbshipit-source-id: e716f1f5b
Summary:
When trying to add annotations to code examples, Javadoc gets confused about `@` sign and there's no good way to fix it so it's both OK to read as a comment in the editor and as a Javadoc HTML, no matter what combination of <code>/<pre>/{code} or escaping you use.
Here we prioritise ability to read the code comment from the editor and therefore the comments are detached from annotations.
Facebook
Reviewed By: mityal
Differential Revision: D20093801
fbshipit-source-id: 25867c27a
Summary:
Now when typechecking a class `A` marked with `Nullsafe(LOCAL)`,
classes from trusted list are properly recognized and nullability of
method params and return value are refined to `LocallyCheckedNonnull`
in a context of class `A`.
NOTE: refininng nullability when **accessing fields** on trusted classes
is **not implemented yet**, because the whole business of handling fields
in nullsafe is somewhat convoluted. This should not be a huge issue
though, since in Java fields are commonly accessed via getters any
way.
Reviewed By: mityal
Differential Revision: D20056158
fbshipit-source-id: 496433d90
Summary:
This ignores the error memory status (e.g. when condition expression is evaluated to bottom), in
order to keep analyze following code.
```
if ( e ) // e is evaluated to bottom due to a problem of Inferbo {
... // code here was not analyzed before
}
```
Reviewed By: ezgicicek
Differential Revision: D20067434
fbshipit-source-id: a1713722c
Summary:
This will help making error reporting more actionable.
Often methods that are nullable in general (like View.findViewById) are used as not-nullable due to app-invariants. In such cases suggesting a non-nullable alternative that does an assertion under the hood makes the error report more actionable and provides necessary guidance with respect to coding best practices
Follow up will include adding more methods to models.
If this goes well, we might support it in user-defined area (nullability
repository)
Reviewed By: artempyanykh
Differential Revision: D20001416
fbshipit-source-id: 46f03467c
Summary: Count the time used by the `RestartScheduler` for analysis (useful) and the time wasted because a a worker was not able to take a lock to have a metric to compare different versions of the scheduler. The wasted time is not actually count but it can be calculated by substracting useful time from the total time. This was implemented like these to avoid substractions that may make the floating point calculations more complicated.
Reviewed By: ngorogiannis
Differential Revision: D19969960
fbshipit-source-id: 68a1132ca
Summary: When a worker fails because it can't a get the lock of a `Procname` it will include it in the exception that it throws so the `RestartScheduler` can record it as a dependency. Then when scheduling a new work item from `RestartScheduler.next` it will check if this dependency is already met, if it isn't it will not schedule the `Procname` yet.
Reviewed By: ngorogiannis
Differential Revision: D19820331
fbshipit-source-id: b48cacc9a
Summary: Add files and procedures to the `RestartScheduler`'s work queue. This makes the chaining with the FileScheduler unnecessary so it's removed.
Reviewed By: ngorogiannis
Differential Revision: D19942354
fbshipit-source-id: 59e25c1c2
Summary: This diff finds dead modules, i.e, .ml files that is not used in the binaries.
Reviewed By: ngorogiannis
Differential Revision: D20035984
fbshipit-source-id: 56ac2e817
Summary:
Lets not also describe what it does, but emphasize that it is
nullsafe-specific and also what are benefits of using it.
Reviewed By: artempyanykh
Differential Revision: D20030497
fbshipit-source-id: f28c803fd
Summary:
The `--continue-analysis` option enables continuing analysis after more targets are captured by
`--continue`. For example,
```
$ infer capture -- buck build tgt1
$ infer analyze --merge
$ infer capture --continue -- bucck build tgt2
$ infer analyze --merge --continue-analyze
```
In the last analysis, it reuses the analysis results of `tgt1` from the previous analysis. If
`tgt1` and `tgt2` have a same dependency to a library, the analysis results of the library is also
reused.
Reviewed By: dulmarod
Differential Revision: D19996598
fbshipit-source-id: bb6874a6f
Summary:
Introduction of `ThirdPartyNonnull` nullability broke nullability
refinement heuristic for enums. This diff fixes it and also adds tests
so that we hopefully avoid such issues in future.
Reviewed By: mityal
Differential Revision: D19975810
fbshipit-source-id: f9245f305
Summary:
We need to be able to differentiate `UncheckedNonnull`s in internal vs
third-party code. Previously, those were under one `UncheckedNonnull`
nullability which led to hacks for optmistic third-party parameter
checks in `eradicateChecks.ml` and lack of third-party enforcement in
`Nullsafe(LOCAL, trust=all)` mode (i.e. we want to trust internal
unchecked code, but don't want to trust unvetted third-party).
Now such values are properly modelled and can be accounted for
regularly within rules.
Also, various whitelists are refactored using
`Nullability.is_considered_nonnull ~nullsafe_mode nullability`.
`ErrorRenderingUtils` became a tad more convoluted, but oh well, one
step at a time.
Reviewed By: mityal
Differential Revision: D19977086
fbshipit-source-id: 8337a47b9
Summary:
Add support for nullsafe mode with `trust=all` and `trust=none` a case
with a specific trust list is not supported yet and needs to be
implemented separately.
Tests introduce one unexpected
`ERADICATE_INCONSISTENT_SUBCLASS_PARAMETER_ANNOTATION` issue which
complains about `this` having incorrect nullability; it is a bug and
needs to be fixed separately.
Reviewed By: mityal
Differential Revision: D19662708
fbshipit-source-id: 3bc1e3952
Summary: Was broken by previous diff: I forgot to update issues.exp
Reviewed By: artempyanykh
Differential Revision: D20001233
fbshipit-source-id: 67f534349
Summary: In all other cases we have period at the end, which is inconsistent.
Reviewed By: artempyanykh
Differential Revision: D20001065
fbshipit-source-id: 85ec6d751
Summary:
This helps debug nullsafe. Before, we would only print the initial and
last state of a given node but now we can see all the intermediate steps
too.
Example before:
```
before:
&s -> [Param s ] [UncheckedNonnull] java.lang.String*
&this -> [this] [StrictNonnull] Toto*
after:
&s -> [Param s ] [UncheckedNonnull] java.lang.String*
&this -> [this] [StrictNonnull] Toto*
```
After:
```
before:
&s -> [Param s ] [UncheckedNonnull] java.lang.String*
&this -> [this] [StrictNonnull] Toto*
instr: n$0=*&this:Toto* [line 10]
new state:
n$0 -> [this] [StrictNonnull] Toto*
&s -> [Param s ] [UncheckedNonnull] java.lang.String*
&this -> [this] [StrictNonnull] Toto*
...
instr: EXIT_SCOPE(n$0,n$1,this); [line 10]
new state:
&s -> [Param s ] [UncheckedNonnull] java.lang.String*
&this -> [this] [StrictNonnull] Toto*
```
Reviewed By: mityal
Differential Revision: D19973278
fbshipit-source-id: bcea33f96
Summary:
Use a record of package, class name to store (qualified) Java class names. This saves the round trip of concatenating then splitting again, etc, as well as saves some memory in the type environment as now the package paths can be shared across classes of the same package (about 10% in tests).
Also remove some unfortunate APIs.
Reviewed By: jvillard
Differential Revision: D19969325
fbshipit-source-id: f7b7f5a55
Summary: Change the ProcLocker implementation to use symlinks instead of files. Tests have indicated that they may use less resources.
Reviewed By: ngorogiannis
Differential Revision: D19822048
fbshipit-source-id: 991ababf2
Summary:
The previos one was too broad and did not indicate the main intended
usage, which is currently the nullsafe typechecker.
Also it was misleading: Initializer methods should NOT be called inside
constructors.
Finally, it recommended using Initializer in Builder pattern, which is
a questionable idea, so it better to avoid mentioning builders.
Reviewed By: artempyanykh
Differential Revision: D19942675
fbshipit-source-id: 0eb1ce796
Summary: The way `Mangled.t` is used in `JavaClassName` means that it's always a plain string (we never have a "mangled" part). Remove the indirection and extra allocation. Also, simplify the API by throwing away one function that was used just once and wastefully.
Reviewed By: artempyanykh
Differential Revision: D19950672
fbshipit-source-id: b61fcba6e
Summary: Instead of converting the class type name of a java procedure to a string and then back to a type name, just get it directly.
Reviewed By: jvillard
Differential Revision: D19950528
fbshipit-source-id: dadf6d130
Summary: Rather than recomputing the `proc_name`, let's pass it around.
Reviewed By: skcho
Differential Revision: D19951461
fbshipit-source-id: 90b57dcc7
Summary: This diff suppresses integer overflow issues in functions that includes "hash" in its name.
Reviewed By: jvillard
Differential Revision: D19942654
fbshipit-source-id: d86fa4f00
Summary: In line with changes to loom query in D19903057, let's adjust Infer's processing of the results.
Reviewed By: martintrojer
Differential Revision: D19902933
fbshipit-source-id: 200b3a03e
Summary: Add the number of cores used and the scheduler type to the environment info printed before running.
Reviewed By: ngorogiannis
Differential Revision: D19941243
fbshipit-source-id: 576e9f610
Summary: Not needed any more as infer's concurrency isn't controlled via make.
Reviewed By: jvillard
Differential Revision: D19905712
fbshipit-source-id: f97ef4421
Summary:
Some annotation processors / transormers might generate artificial fields. These
are not expicitly written by code writer, hence non actionable.
We distinct this fields heuristically: if they start with "$", they are
surely not user-written.
Reviewed By: ezgicicek
Differential Revision: D19947988
fbshipit-source-id: a0a15fc23
Summary:
Add let*/+ syntax to `result` types to simplify all the applications of
`>>=`, `>>|` that are followed by a binding (eg `>>= fun x -> ...`) in
pulse.
Reviewed By: skcho
Differential Revision: D19940728
fbshipit-source-id: 4df159029
Summary:
We can already tell that a summary cannot be applied by raising
`Contradiction`, so use this mechanism to stop applying a summary if the
number of formals doesn't match the number of actuals provided.
Previously we would return an option type and `None` in case of
mismatch, on top of the `raise Contradiction` mechanism (used for
aliasing and arithmetic contradictions).
This changes the behaviour of pulse in this case: before we would skip
over the function call, but now we stop the analysis.
Reviewed By: dulmarod
Differential Revision: D19940729
fbshipit-source-id: 6def40cd6
Summary: Once we identify a weakSelf variable that is being used in a Noescape block, we want to report only the first occurrence.
Reviewed By: skcho
Differential Revision: D19941502
fbshipit-source-id: 2b6d4648b
Summary: For each variable that we identify as a captured strong self, we want to report only the first occurrence.
Reviewed By: skcho
Differential Revision: D19940031
fbshipit-source-id: f38f642c9
Summary: When we discovered that a strongSelf var was not checked for null, we then report in each occurrence which is spammy. Now we report only the first occurrence. To achieve that, we store a `reported` flag in the domain that gets set to true after we report once, and we only report if it's false.
Reviewed By: jvillard
Differential Revision: D19877218
fbshipit-source-id: c44109ae9
Summary:
This adds `let*/+`, `and*/+` operators for Option. See [the manual](https://caml.inria.fr/pub/docs/manual-ocaml/manual046.html) for more information.
Example usage:
```
let foo =
let open IOption.Let_syntax in
let* a = get_optional () in
let* b = get_another_optional () in
return (a + b)
```
Reviewed By: jvillard
Differential Revision: D19880033
fbshipit-source-id: c7998b0c6
Summary:
Previous implementation supported only stringy params (strings and
stringified bools). Current one exposes a proper variant `Annot.t`,
with support for all possible param values in Java except
numbers (more on that below).
This change is required for implementing `Nullsafe(LOCAL)` as the
annotation used to specify nullsafe behaviour has a more complex
structure than what we've dealt with before.
**Why support for number values was not added**: supporting numbers
requires using `int64`. Unfortunately, adding another variant `Vnum
int64` to `Annot.t` causes a runtime failure on assert in
`MaximumSharing.ml:133`. It seems that it might be enough to flip
`fail_on_nonstring` from `true` to `false`, but since this would
require additional testing and is not required for my case, I'll leave
checking this to whoever needs to use numeric annot params in future.
Reviewed By: ezgicicek
Differential Revision: D19855923
fbshipit-source-id: 878e33856
Summary: No reason to use a set when an integer will suffice. This further reduces GC churn.
Reviewed By: fgasperij
Differential Revision: D19888300
fbshipit-source-id: 9fc8c73f5
Summary: Queues are implemented using a circular array, so should be less GC-heavy than continually allocating/freeing list nodes.
Reviewed By: jberdine, fgasperij
Differential Revision: D18504104
fbshipit-source-id: 93d29c253
Summary:
Building the call graph should be done only in the scheduler process after having forked all workers. This was achieved by a lazy init pattern, whereby the first time `next` was called, it would build the call graph, on the assumption that `next` is only ever called in the scheduler after forking.
D19769741 made this compulsory regardless the scheduler by passing a thunk to `ProcessPool` which is called to obtain the actual scheduler, on the right process and after the fork.
This means we don't need the custom lazy init logic any more. In addition, that set up used a DB query to overapproximate the number of procedures to analyse, because this was supposed to be provided *before* forking. Now this is also not needed, and on top of that we can provide the exact number after building the call graph.
Reviewed By: ezgicicek
Differential Revision: D19833974
fbshipit-source-id: 7f6d51d93
Summary:
In Inferbo, the bottom memory is introduced when a node is unreachable by pruning, i.e.
`[[e]] <= [0,0]` on `prune(e)`. This diff distinguishes whether `[[e]]` is `[0,0]` (unreachable)
or bottom (it could not evaluate `e` by some unknown reasons).
Reviewed By: ezgicicek
Differential Revision: D19902046
fbshipit-source-id: 7706017d6
Summary:
More newer = more better.
This flips the Not_found -> Not_found_s switch, and forbids a bunch more
polymorphic comparisons (mostly turned into `int` comparisons for
convenience). Earlier diffs prepare for this so this diff is only about
breaking changes in the API, of which there are only a few.
Reviewed By: jberdine
Differential Revision: D19861583
fbshipit-source-id: fe54ce8f0
Summary:
Core v13 APIs stopped raising `Not_found` and instead raise
`Not_found_s`, which wreaks havoc in our codebase. Carefully inspect
each `Not_found` and add `Not_found_s` where needed (that way it's
compatible with both Core v12 and v13 for now).
Reviewed By: jberdine
Differential Revision: D19861585
fbshipit-source-id: 9a5361ae9
Summary:
The big one:
- stop using polymorphic `<>`, `<`, `>`, ..
- add `<>` to `PolyVariantEqual` escape hatch now that `<>` is as taboo as `=`
- Interestingly, there were a lot of uses of `Z.(x < y)`, which although
they seem to use `Z.lt` actually used polymorphic comparison. The actual
comparison infix operators of `Z` are cleverly hidden in `Z.Compare`
instead, which makes them impractical to use...
Reviewed By: jberdine
Differential Revision: D19861584
fbshipit-source-id: 5dce08ad9
Summary:
Polymorphic compare is bad, 'mkay? I also tried changing this to do what
the comment says the function does (keep the first term instead of the
"largest" term) but that resulted in test changes so I kept the original
behaviour instead.
Reviewed By: jberdine
Differential Revision: D19861587
fbshipit-source-id: d57fd4a02
Summary:
That trick briefly worked when it was introduced but I think a change in
merlin broke it again as I see "sexp_list", "sexp_option" in the types
shown by merlin again. Disgusting!
Remove useless hack. Also referring to types such as `sexp_list` is
deprecated in core v13 for some reason.
Reviewed By: jberdine
Differential Revision: D19861586
fbshipit-source-id: 1c4c3af13
Summary:
This adds a violation of baos.topl found in github/seata/seata. However,
it is not a bug (see comment in commit).
Reviewed By: ngorogiannis
Differential Revision: D19518641
fbshipit-source-id: e219245ee
Summary:
Since Javalib 3.2, a new feature allows to rewrite
methods that contain (some specific form of) closures. Infer
now uses it. When loading each class we rewrite them and
new classes generated by Javalib to implements closures
(i.e. Java interfaces)<
Reviewed By: ngorogiannis
Differential Revision: D19389227
fbshipit-source-id: 245dd4404
Summary:
When finding a proper constructor for `std::make_shared`, the given parameter types are sometimes
slightly different, e.g., const int vs int. This diff loosens the condition of the types on finding
constructors.
Reviewed By: ngorogiannis
Differential Revision: D19743198
fbshipit-source-id: f90213109
Summary: Instrument the ProcLocker to get the aggregated systime that is used by `lock` and `unlocks`.
Reviewed By: ngorogiannis
Differential Revision: D19814554
fbshipit-source-id: 5fd928b9c
Summary:
This was introduced in D19770219, and skcho caught it, but for some
reason I seemed to have a blind spot and confused the semantics of `instanceof`.
Reviewed By: skcho
Differential Revision: D19813031
fbshipit-source-id: d939b981b
Summary:
This diff fixes the clang translation for switch statement. It assumed that `default:` comes always
at last, which introduced some unreachable nodes inadvertently, e.g. when `default:` comes at first.
Reviewed By: dulmarod
Differential Revision: D19793138
fbshipit-source-id: 1e8b52c0d
Jules Villard
Sungkeun Cho
Nikos Gorogiannis
Mitya Lyubarskiy
Ezgi Çiçek
Artem Pianykh
Dulma Churchill
Daiva Naudziuniene
David Pichardie
Fernando Gasperi Jabalera
Martin Trojer
Alexander Mols
Radu Grigore
Artem Pyanykh