Summary:
We would previously skip any function that had one of these.
A no-op translation is sufficient to fix this issue (see new E2E test).
Reviewed By: mbouaziz
Differential Revision: D6317323
fbshipit-source-id: 0855bd8
Summary:
`infer capture -a checkers ...` would accidentally trigger the analysis phase.
This crashes the Buck flavors integration when used with `--reactive` because
.start never gets created in the infer-out-* subfolders of buck-out.
Reviewed By: dulmarod
Differential Revision: D6336072
fbshipit-source-id: af0ab5e
Summary:
Target patterns/aliases rarely contain only targets supporting infer flavor, so it makes sense to automatically filter kinds with handle in those cases.
No need for `$(buck query ...)` anymore in your infer commands!
Reviewed By: dulmarod
Differential Revision: D6335463
fbshipit-source-id: 16c8b70
Summary:
When refactoring `Buck.ml` I took the list of accepted kinds that was used for compilation database.
However `#infer-capture-all` flavor is not supported by `cxx_test` targets.
Reviewed By: dulmarod
Differential Revision: D6335543
fbshipit-source-id: db3a5f4
Summary:
To resole #797 this adds runtime option to select VFS for SQLite,
When infer runs on WSL this defaults to "unix-excl" (https://sqlite.org/vfs.html) and if VFS is specified, then WAL is not enabled (since WAL is non compatible with custom VFS - https://www.sqlite.org/wal.html).
Closes https://github.com/facebook/infer/pull/798
Reviewed By: jvillard
Differential Revision: D6335037
Pulled By: dulmarod
fbshipit-source-id: d9b9a58
Summary: Just changing ClangTrace to actually look at the different sanitizer kinds.
Reviewed By: jeremydubreil
Differential Revision: D6325086
fbshipit-source-id: 5da236d
Summary:
We need to use the procedure description of the callees for lazy dynamic dispatch and for the resolution of the lambda. We may also need this information in other analyses, e.g. for RacerD. This diff makes the procedure description of the callees as part of the summary.
The procedure description has been part of the summary for a while already without noticeable decrease in performance.
Reviewed By: mbouaziz
Differential Revision: D6322038
fbshipit-source-id: 84101cb
Summary: This does not seem to be used anymore. If we happen to need this, we should update the payload, not the attributes.
Reviewed By: jberdine
Differential Revision: D6321824
fbshipit-source-id: 5c19359
Summary: In a thread safety report we used the access path from the final sink. This diffs change the report to include the expanded access path from the initial sink.
Reviewed By: sblackshear
Differential Revision: D6297848
fbshipit-source-id: 2386063
Summary: Having a summary for a callee from the specs cache does not necessarily mean that Eradicate has been run on it. This diff looks at the Eradicate payload instead from the return of the on-demand analysis instead.
Reviewed By: sblackshear
Differential Revision: D6054376
fbshipit-source-id: c6eec35
Summary: In the translation from SIL to HIL we ignore the right-hand side expression if it consists of a single access path, e.g. unary operator. This diff preserves the right-hand side expression.
Reviewed By: sblackshear
Differential Revision: D6271814
fbshipit-source-id: c27e913
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
This diff adds a new way of executing blocks when they are passed as parameters to a method. So far we just skipped the block in this case.
Now we can execute it. Let's demonstrate with an example. Say we have
//foo has a block parameter that it executes in its body
foo (Block block) { block();}
// bar calls foo with a concrete block
bar() {
foo (^(){
self->x = 10;
});
};
Now, when we call the method foo with a concrete block, we create a copy of foo instantiated with the concrete block, which in itself is translated as a method with a made-up name.
The copy of foo will get a name that is foo extended with the name of the block parameter, the call to the block parameter will be replaced to a call to the concrete block, and the captured variables
of the concrete block (self in this case), will be added to the formals of the specialized method foo_block_name.
This is turned on at the moment for ObjC methods with ObjC blocks as parameters, and called with concrete blocks. Later on we can extend it to other types of methods, and to C++ lambdas, that are handled similarly to blocks.
Another extension is to check when the block has been called with nil instead of an actual block, and raise an error in that case.
After this diff, we can also model various methods and functions from the standard library that take blocks as parameters, and remove frontend hacks to deal with that.
Reviewed By: ddino
Differential Revision: D6260792
fbshipit-source-id: 0b6f22e
Summary: The checker should not report unitinialzed values on the throw branch.
Reviewed By: ddino
Differential Revision: D6267019
fbshipit-source-id: 05768f1
Summary:
When fuzzy-matching cpp names, allow to match only a prefix of
blacklist entries.
Reviewed By: da319
Differential Revision: D6233055
fbshipit-source-id: a3a4913
Summary: We were conflating reads/writes with container reads/writes that created false positives.
Reviewed By: sblackshear
Differential Revision: D6232768
fbshipit-source-id: 39159cb
Summary: Better error message for the direct dereference of nullable method without intermediate variable.
Reviewed By: sblackshear
Differential Revision: D6244494
fbshipit-source-id: 2ca2d22
Summary: This is a hack to removes most of the false positives of this checker in Objective C.
Reviewed By: sblackshear
Differential Revision: D6239914
fbshipit-source-id: 1cf05de
Summary:
Update plugin to take into account that some fields of VarDecl were unused by
infer. Also, use a boolean holding `hasExternalStorage` instead of comparing to
the fragile (and probably not entirely accurate) `"extern"` string.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D6231836
fbshipit-source-id: 3c0a75b
Summary:
This confuses the SIOF checker and causes false positives. This dummy deref is
generated for constructors of classes that are modeled as being pointer types
instead of the actual class in infer, typically for smart pointers. I do not
understand how this works.
The biabduction also analyses this code, so might now get confused itself.
Reviewed By: jberdine
Differential Revision: D6221817
fbshipit-source-id: 050c5a9
Summary:
The issue is with classes defining static data members:
```
$ cat foo.h
struct A {
static int foo;
};
$ cat foo.cpp
#include "foo.h"
int A::foo = 12;
int f() { return A::foo; // should see A::foo as defined in this translation unit
$ cat bar.cpp
#include "foo.h"
void g() { return A::foo; // should see A::foo defined externally
```
Previously, both foo.cpp and bar.cpp would see `A::foo` as defined within their
translation unit, because it comes from the header. This is wrong, and static
data members should be treated as extern unless they're defined in the same
file.
This doesn't change much except for frontend tests. SIOF FP fix in the next diff.
update-submodule: facebook-clang-plugins
Reviewed By: da319
Differential Revision: D6221744
fbshipit-source-id: bef88fd
Summary: This only works for Java at the moment but we can re-organise the code later to add the Objective C equivalent of these assertion methods.
Reviewed By: mbouaziz
Differential Revision: D6230588
fbshipit-source-id: 46ee98e
Summary:
When C++ functions are translated to SIL procedures, their type is C rather then C++. In RacerD, we want to treat C++ functions the same as C++ methods.
Added a function to check if the procedure is Objc/Objc++/C/C++.
Reviewed By: sblackshear
Differential Revision: D6209523
fbshipit-source-id: 293f938
Summary:
Seems it should have been done there all along.
The analyzer does not currently understand the implementation of
atomicity in folly::AtomicStruct.
The analyzer does not currently understand when std::atomic operations
are are used correctly versus incorrectly.
The analyzer does not currently understand that the representation of
folly::ThreadLocal is, ah, thread-local, leading to false alarms.
The analyzer does not currently understand the control flow /
scheduling constraints imposed by the implementation of Future.
It seems that the implementation of folly::Optional is more C++
template magic than the analyzer can currently understand.
The model of std::vector contains bogus memory accesses, leading to
false alarms.
Reviewed By: sblackshear
Differential Revision: D6226199
fbshipit-source-id: 8cb083b
Summary:
Destructors usually do not race with other methods.
We do not want to analyze or report on destructors.
Reviewed By: sblackshear
Differential Revision: D6222145
fbshipit-source-id: 5266622
Summary:
:
As we want to model many C++ methods, using a lot of matchers with `if / else if` will be tiring.
This diff introduces a dispatcher which is a nicer way to write the same thing.
No new model for now, just a refactoring.
Ideally we'd need a parser generator for C++ names...
Reviewed By: jvillard
Differential Revision: D6209234
fbshipit-source-id: 49fae5e
Summary: The checker should not report nullable violations on repeated calls
Reviewed By: sblackshear
Differential Revision: D6195471
fbshipit-source-id: 16ff76d
Summary: The Java bytecode does not contain information about the location of abstract of interface methods. Before this diff, the analysis trace was tuncated and the file where the abstract or interface method was not included in the trace, which makes it harder to understand the Infer report, especially when the method is on a generated file that is not checked in the repository.
Reviewed By: sblackshear
Differential Revision: D6223612
fbshipit-source-id: c80c6f2
Summary: A source can belong to more than one target. In this case, we should keep only one of the report.
Reviewed By: sblackshear
Differential Revision: D6200058
fbshipit-source-id: 4eced42
Summary:
The SIOF checker relies on the header models to detect whether `<iostream>` has
been included in source files.
Reviewed By: mbouaziz
Differential Revision: D6209904
fbshipit-source-id: a48855b
Summary: More general version of the fix in D6138749. This diff moves RacerD's lock modeling into a separate module and uses the module in the HIL translation to check when a function has lock/unlock semantics.
Reviewed By: jberdine, da319
Differential Revision: D6191886
fbshipit-source-id: 6e1fdc3
Summary:
This diff takes the first step toward a more general filtering
system. This step is concerned only with filtering at the reporting
stage, filtering for the capture and analysis stages is left for
later.
This diff adds a new command line / config option
```
--filter-report +string
Specify a filter for issues to report. If multiple filters are
specified, they are applied in the order in which they are
specified. Each filter is applied to each issue detected, and only
issues which are accepted by all filters are reported. Each filter
is of the form:
`<issue_type_regex>:<filename_regex>:<reason_string>`. The first
two components are OCaml Str regular expressions, with an optional
`!` character prefix. If a regex has a `!` prefix, the polarity is
inverted, and the filter becomes a "blacklist" instead of a
"whitelist". Each filter is interpreted as an implication: an issue
matches if it does not match the `issue_type_regex` or if it does
match the `filename_regex`. The filenames that are tested by the
regex are relative to the `--project-root` directory. The
`<reason_string>` is a non-empty string used to explain why the
issue was filtered.
See also infer-report(1) and infer-run(1).
```
Reviewed By: jvillard
Differential Revision: D6182486
fbshipit-source-id: 9d3922b
Summary: Functions that do not belong to a class or a struct are translated to c-style functions even in the context of cpp. We need to add ownership to locals for c-style functions too.
Reviewed By: sblackshear
Differential Revision: D6196882
fbshipit-source-id: 715f129
Summary:
vector::data returns a pointer to the first value of the vector.
- The size of the (array) pointer should be the same with the vector.
- The pointer should point to the same abstract value with the vector.
Reviewed By: mbouaziz
Differential Revision: D6196592
fbshipit-source-id: cc17096
Summary: `std::unique_lock` constructor allows to create a unique lock without locking the mutex. `std::unique_lock::try_lock` returns true if mutex has been acquired successfully, and false otherwise. It could be that an exception is being thrown while trying to acquire mutex, which is not modeled.
Reviewed By: jberdine
Differential Revision: D6185568
fbshipit-source-id: 192bf10
Summary:
The concurrency analyzer often does not understand object lifetimes
well enough to realize that destructors are usually not called in
parallel with any other methods. This leads to false alarms. This diff
suppresses these by simply skipping destructors in the concurrency
analysis.
Reviewed By: sblackshear
Differential Revision: D6182646
fbshipit-source-id: e9d1cac
Summary:
The clang frontend translates static locals incorrectly, in the sense
that the initializer is executed many times instead of once. This
leads to false alarms in the concurrency analysis. This diff
suppresses these by ignoring accesses to static locals.
Reviewed By: sblackshear
Differential Revision: D6182644
fbshipit-source-id: d8ca4c0
Summary:
Code often uses std::unique_lock::owns_lock to test if a deferred lock
using the 2-arg std::unique_lock constructor actually acquired the
lock.
Reviewed By: sblackshear
Differential Revision: D6181631
fbshipit-source-id: 11e9df2
Summary:
Use a distinct issue type for the Java and C++ concurrency analyses,
as the properties they are checking are significantly different.
Reviewed By: sblackshear
Differential Revision: D6151682
fbshipit-source-id: 00e00eb
Summary:
In a summary, you never want to see a trace where non-footprint sources flow to a sink.
Such a trace is useless because nothing the caller does can make more data flow into that sink.
Reviewed By: jeremydubreil
Differential Revision: D5779983
fbshipit-source-id: d06778a
Summary:
Due to limitations in our Buck integration, the thread-safety analysis cannot create a trace that bottoms out in a Buck target that is not a direct dependency of the current target.
These truncated traces are confusing and tough to act on.
Until we can address these limitations, let's avoid reporting on truncated traces.
Reviewed By: jeremydubreil
Differential Revision: D5969840
fbshipit-source-id: 877b9de
Summary:
Relative paths in jbuilder + `S **` seem to be a losing combo. Spell out the directories instead.
This was obtained via letting jbuilder generate .merlin, then curating it by hand.
Reviewed By: jberdine
Differential Revision: D6159600
fbshipit-source-id: 7d799bb
Summary:
:
Make both buck capture and compilation database handle buck command line arguments and invoke buck query the same way.
Plus allow:
- target patterns `//some/dir:` and `//some/dir/...`. However since `//some/dir:#flavor` and `//some/dir/...#flavor` are not supported, they need to be expanded before adding the infer flavor.
- target aliases (defined in `.buckconfig`)
- shortcuts `//some/dir` rewritten to `//some/dir:dir`
- relative path `some/dir:name` rewritten to `//some/dir:name`
Reviewed By: jvillard
Differential Revision: D5321087
fbshipit-source-id: 48876d4
Summary: These can make the compilation fail, so don't use them unless we really need to.
Reviewed By: mbouaziz
Differential Revision: D6147574
fbshipit-source-id: ab2c3fa
Summary:
If you write
```
boolean readUnderLockOk() {
synchronized (mLock) {
return mField;
}
}
```
it will be turned into
```
lock()
irvar0 = mField
unlock()
return irvar0
```
in the bytecode. Since HIL eliminates reads/writes to temporaries, it will make the above code appear to perform a read of `mField` outside of the lock.
This diff fixes the problem by forcing HIL to perform all pending reads/writes before you exit a critical section.
Reviewed By: jberdine
Differential Revision: D6138749
fbshipit-source-id: e8ad9a0
Summary: In HIL, allow deref'ing a magic address like `0xdeadbeef` for debugging purposes. Previously, we would crash on code like this.
Reviewed By: mbouaziz
Differential Revision: D6143802
fbshipit-source-id: 4151924
Summary:
Linters are now considered a "checker", like backend checkers. This makes, eg,
`--racerd-only` disable the linters, which is more intuitive.
We can now express `-a linters` and `--clang-frontend-action` in terms of these
two new options. For instance, `-a linters --clang-frontend-action lint` is the
same as `--linters-only --no-capture`.
This is another step in the direction of getting rid of `--analyzers`.
Reviewed By: dulmarod
Differential Revision: D6147387
fbshipit-source-id: 53622b2
Summary: A stepping stone to have descriptive issue types for each kind of flow rather that lumping everything into `QUANDARY_TAINT_ERROR`.
Reviewed By: mbouaziz
Differential Revision: D6126690
fbshipit-source-id: a7230c0
Summary: This check is deprecated and will be replaced by a dedicated checker to detect unitialized values.
Reviewed By: mbouaziz
Differential Revision: D6133108
fbshipit-source-id: 1c0e9ac
Summary: Previously, this would incorrectly classify types like `map<std::string, int>` as a buffer
Reviewed By: mbouaziz
Differential Revision: D6125530
fbshipit-source-id: c8564de
Summary:
Before this change, analyses using HIL needed to pass `IdAcessPathMapDomain.empty` to abstract interpreter, and would get back the map as part of the post.
This is a confusing API and was a pain point for Dino in trying to use HIL.
This diff adds a HIL wrapper around the abstract interpreter that hides these details.
It replaces `LowerHIL.makeDefault` as the new "simplest possible way" to use HIL.
Reviewed By: jberdine
Differential Revision: D6125597
fbshipit-source-id: 560856b
Summary:
This is in the spec for clang compilation databases.
Also improves error messages when we fail to parse the compilation database.
closes#771
Reviewed By: dulmarod
Differential Revision: D6123832
fbshipit-source-id: 070f70f
Summary: Saving the list of bugs in a set removes the ordering. Also, there should be no need to remove the duplicated warnings at this level.
Reviewed By: sblackshear
Differential Revision: D6060554
fbshipit-source-id: a78d35d
Summary:
Looked at some problematic summaries and am noticing some common patterns.
Adding some dynamic checks to be run in debug mode in order to make sure my fixes for these patterns are real.
Reviewed By: jeremydubreil
Differential Revision: D5779593
fbshipit-source-id: 9de6497
Summary:
The options passed via `--Xbuck` are usually meant for `buck build` but we also
use them for `buck targets`. It's hard to know which options to take into
account for which Buck subcommand, so just filter out known-incompatible ones.
Reviewed By: dulmarod
Differential Revision: D6123459
fbshipit-source-id: 976b978
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary: Sinks weren't being printed when passthroughs are empty (which, for now, is always). Oops!
Reviewed By: jvillard
Differential Revision: D6110164
fbshipit-source-id: 4488ab0
Summary: This will make it easier to generalize the checker to handling uninitialized struct fields.
Reviewed By: ddino
Differential Revision: D6099484
fbshipit-source-id: b9c534b
Summary:
Buck reads the version on stderr or, very recently, from either stdout or stderr.
This makes infer output the version of stderr when called from Buck or invoked as javac, and on stdout otherwise.
Reviewed By: martinoluca
Differential Revision: D6098392
fbshipit-source-id: 23f1d5a
Summary: This makes `--biabduction-blacklist-path-regex` and others work as expected.
Reviewed By: mbouaziz
Differential Revision: D6088625
fbshipit-source-id: 8f1daa3
Summary:
This is a better default than running the biabduction analysis only, now that
we have several mature checkers.
Reviewed By: jeremydubreil
Differential Revision: D6051186
fbshipit-source-id: 04ac0c6
Summary: In preparation for making `-a checkers` the default (when no analyzer is specified), let's test `-a checkers` by default.
Reviewed By: mbouaziz
Differential Revision: D6051177
fbshipit-source-id: d8ef611
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
Whenever we see a use of a lock, infer that the current method can run in a multithreaded context. But only report when there's a write under a lock that can be read or written without synchronization elsewhere.
For now, we only infer this based on the direct usage of a lock; we don't assume a caller runs in a multithreaded context just because its (transitive) callee can.
We can work on that trickier case later, and we can work on smarter inference that takes reads under sync into account. But for now, warning on unprotected writes of reads that occur under sync appears to be too noisy.
Reviewed By: jberdine
Differential Revision: D5918801
fbshipit-source-id: 2450cf2
Summary: This commit adds unsigned symbol for preciser analysis results with less number of uses of min/max operators.
Reviewed By: mbouaziz
Differential Revision: D6040437
fbshipit-source-id: 999ca4c
Summary:
This is useful if some command behaves like one infer knows how to integrate with. For instance:
```
infer --force-integration clang -- clang-3.8 -c examples/hello.c
```
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D6051589
fbshipit-source-id: dd693b0
Summary:
This allows us to get rid of code that copied source files individually. I
didn't migrate the various flags that could be included as it doesn't look like
that's possible yet (they depend on the context and on some configuration
options).
Reviewed By: jberdine
Differential Revision: D6051825
fbshipit-source-id: c28dd37
Summary:
This will allow most of the checkers, except the bi-abduction, to skip the analysis on the specialized clone of the methods used to handle dynamic dispatch. Doing this, we can run the bi-abduction analysis using:
infer -a checkers --biabduction
without risk of conflicts on the resolution of dynamic dispatch.
Reviewed By: sblackshear
Differential Revision: D6052347
fbshipit-source-id: 0c75bf3
Summary: This removes cases of duplicated warnings when the dynamic dispatch handling specializes a method Infer already reported on.
Reviewed By: sblackshear
Differential Revision: D6060337
fbshipit-source-id: dbefeca
Summary:
It looks like the old code for expanding access paths assumed that `FormalMap.get_formals_indexes` assumed the returned list tuples would be sorted by index, but it's actually sorted by var name.
As a consequence, formals might be expanded into the wrong actuals.
This diff fixes the problem by not relying on `get_formals_indexes`.
Reviewed By: jberdine
Differential Revision: D6056365
fbshipit-source-id: 09f3208
Summary: The order of the elements in the list maters since the function `string_to_analyzer` will return the fist element found in the list. Inverting the `"biabduction"` and `"infer"` entries in the list allows D6051146 to have no functional implications.
Reviewed By: sblackshear
Differential Revision: D6055840
fbshipit-source-id: 6cf5ac2
Summary:
This was a crutch from the days before ownership analysis.
We shouldn't need it anymore, and it was actually causing FP's because we were skipping analysis of `ImmutableList.builder()` and not understanding that the return value is owned.
Reviewed By: jeremydubreil
Differential Revision: D6035631
fbshipit-source-id: afa0ade
Summary:
One day `-a infer` will alias `-a checkers` so for now create another, more
explicit analyzer name that can be used to migrate progressively. For instance,
after this commit what should continue to use `-a biabduction` can change to
that, so that when `-a infer` becomes an alias to `-a checkers` it can keep
working.
Reviewed By: jeremydubreil
Differential Revision: D6051146
fbshipit-source-id: 1ef4c34
Summary:
This generates `--resource-leak-only` automatically, and make the other
checkers' `-only` option work as expected with respect to `--resource-leak` too
(eg, `--resource-leak --biabduction-only` disables resource leak).
Reviewed By: jeremydubreil
Differential Revision: D6051134
fbshipit-source-id: 2d4a2ba
Summary:
1. Mark some Makefile targets as depending on `MAKEFILE_LIST` so they get rebuilt on Makefile changes
2. Do not show boolean options with no documentation in the man pages (like we do for other option types).
3. Default to Lazy dynamic dispatch for the checkers.
4. In the tests, use `--<checker>-only` instead of relying on `--no-default-checkers`
5. `--no-filtering` is redundant if `--debug-exceptions` is passed
Reviewed By: jeremydubreil
Differential Revision: D6030578
fbshipit-source-id: 3320f0a
Summary: We will then be able to merge the tests for the other checkers without affecting these lab tests
Reviewed By: jvillard
Differential Revision: D6039433
fbshipit-source-id: e575ce9
Summary:
Another step toward running the biabduction analysis as a checker.
Depends on D6038210
Reviewed By: jvillard
Differential Revision: D6038682
fbshipit-source-id: fed45bf
Summary:
The previous version of the code was trying to lookup from disk the procedure description of the procedure to analyze, which was in fact already loaded in memory.
This diff fixes one of the issues preventing the bi-abduction to run as a checker when using the lazy dynamic dispatch algorithm.
Reviewed By: sblackshear
Differential Revision: D6038210
fbshipit-source-id: 10a98ee
Summary:
9c7fc65 introduced a large performance regression, this diff eliminates it and a bit more.
Instead of constructing the quotiented access list map in a two-step process of first constructing a map of all accesses and then quotienting it, the quotiented map is constructed directly by using a coarser comparison function on keys. Partitioning the access map O(number of access paths) times, using an apparently expensive partition predicate, seems to be causing trouble based on rough profile data.
Reviewed By: da319
Differential Revision: D6005262
fbshipit-source-id: 077846c
Summary: Stack-allocated variables cannot be raced on in cpp as every thread has its own stack. At the beginning of the analysis we add ownership to the local variables.
Reviewed By: jberdine
Differential Revision: D6020506
fbshipit-source-id: 0a90a97
Summary: Now that we report write-write races involving more than one write, we need to improve the traces accordingly.
Reviewed By: jberdine
Differential Revision: D6026845
fbshipit-source-id: b1366dd
Summary:
This is to avoid getting BUSY from sqlite when the machine is busy (not
necessarily busy because of infer).
Reviewed By: jberdine
Differential Revision: D6020022
fbshipit-source-id: ca0f913
Summary:
Next step to issue deduplication: do not keep safety conditions that are subsumed by others.
Only do it if they do not have infinite bound: replacing `0 < size` by `1 < size` is ok, but replacing it by `+oo < size` is not because it looks much more like a lack of precision.
Reviewed By: skcho
Differential Revision: D5978455
fbshipit-source-id: acc2384
Summary:
A specific type of alias is added for the vector::empty() result and it is used at pruning.
Now, there are two types of aliases:
- "simple" alias: x=y
- "empty" alias: x=v.empty() and y=v.size
So, if x!=0, y is pruned by (y=0). Otherwise, i.e., x==0, y is pruned by (y>=1).
Reviewed By: mbouaziz
Differential Revision: D6004968
fbshipit-source-id: bb8d50d
Summary:
`pp_instr_list` was not tailrec causing a stack overflow on big code.
Also simplified a few things
Reviewed By: jvillard
Differential Revision: D5995451
fbshipit-source-id: 40a4911
Summary: The may alias analysis relation that the thread safety analysis uses is very specific to Java and causes many false alarms for C++ code. This diff disables it when analyzing C++ code. Improving it to avoid false negatives is left for later.
Reviewed By: sblackshear
Differential Revision: D5974182
fbshipit-source-id: 9c7fc65
Summary:
The analyzer currently does not understand the control flow of
Singletons, which leads to false alarms. This diff is an unsound hack
that simply ignores any read or write accesses made when computing the
value of a singleton.
Reviewed By: sblackshear
Differential Revision: D5979639
fbshipit-source-id: 34caecb
Summary:
Model folly::SharedMutex lock and unlock operations, some
apache::thrift::concurrency::ReadWriteMutex operations, some
folly::RWSpinLock operations, and folly::MicroSpinLock operations.
Reviewed By: sblackshear
Differential Revision: D5974225
fbshipit-source-id: 19e2816
Summary:
The biabduction backend can raise exceptions that will be caught when triggered
from within the biabduction backend itself (eg, `analyze_procedure` called from
Symexec as a result of an ondemand analysis, because Symexec will catch these),
but not caught when called as the result of an ondemand analysis emanating from
another analyzer (eg ThreadSafety).
Make the biabduction more self-contained by wrapping the analysis of a
procedure inside a `try/with` with similar properties as the one of Symexec.
Reviewed By: jeremydubreil
Differential Revision: D5986335
fbshipit-source-id: 36a5d32
Summary:
Attempting to translate these will not go well as the declaration still depends
on some template arguments. Added a test that was previously crashing the
frontend.
Also extend the catching of "Unimplemented" and other errors to `translate_one_decl` as it was useful to debug this issue. In particular, reraise all exceptions and log some additional context when doing so.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5976357
fbshipit-source-id: fca8e38
Summary:
Previously, annotating something ThreadSafe meant "check that it is safe to run all of this procedure's methods in parallel with each other" (including self-parallelization).
This makes sense, but it means that if the user writes no annotations, we do no checking.
I'm moving toward a model of inferring when an access might happen on a thread that can run concurrently with other threads, then automatically checking that it is thread-safe w.r.t to all other accesses to the same memory (on or off the current thread thread).
This will let us report even when there are no `ThreadSafe` annotations.
Any method that is known to run on a new thread (e.g., `Runnable.run`) will be modeled as running on a thread that can run in parallel with other threads, and so will any method that is `synchronized` or acquires a lock.
In this setup, adding `ThreadSafe` to a method just means: "assume that the current method can run in parallel with any thread, including another thread that includes a different invocation of the same method (a self race) unless you see evidence to the contrary" (e.g., calling `assertMainThread` or annotating with `UiThread`).
The key step in this diff is changing the threads domain to abstract *what threads the current thread may run in parallel with* rather than *what the current thread* is. This makes things much simpler.
Reviewed By: jberdine
Differential Revision: D5895242
fbshipit-source-id: 2e23d1e
Summary:
Indicate if read or write is protected, and do not print only the
field but also the object involved in the race.
Reviewed By: sblackshear
Differential Revision: D5974250
fbshipit-source-id: 351a576
Summary:
Expanding traces currently works in the following way:
Given a `TraceElem.Kind` `k` we want to report in `foo`, we look for a callee `C` of `foo` that has a `TraceElem.Kind` equal to `k` in its summary, grab the summary for `C`, then repeat until we bottom out.
This isn't very flexible: it insists on equality between `TraceElem.Kind`'s as the criteria for expanding a trace.
This diff introduces a new `matches` function for deciding when to expand a trace from a caller into a callee.
Clients that don't want strict equality can implement a fuzzier kind of equality inside this function.
I've gone ahead and done this for the trace elemes of thread-safety.
In the near future, equivalent access paths won't always compare equal from caller to callee, so we want to match their suffixes instead.
Reviewed By: jvillard
Differential Revision: D5914118
fbshipit-source-id: 233c603
Summary:
Move Inferbo safety conditions to their own file.
Split the old `Condition.t` to a condition together with a trace.
This will ease having: different kind of condition and several traces for the same condition (see following diff)
Reviewed By: jvillard
Differential Revision: D5942030
fbshipit-source-id: d74a612
Summary: Not using this for now, and it seems good to simplify the complex domain as much as we can.
Reviewed By: jberdine
Differential Revision: D5970233
fbshipit-source-id: a451503
Summary:
This is due to the changes in `facebook-clang-plugins` where objc_object_type_info now has a `field_prefix` set to `ooti_`
See 5f2042abe6 for the changes made to `facebook-clang-plugins`
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5963064
fbshipit-source-id: 9705774
Summary:
Running `infer report foo.specs` would overwrite report.json with an empty json.
Only recompute report.json when running `infer-analyze` or `infer-run`.
Reviewed By: mbouaziz
Differential Revision: D5963500
fbshipit-source-id: e579c6f
Summary:
Use a monotonic time source instead.
Also, sleep between retries in the Serialization code.
Reviewed By: jberdine
Differential Revision: D5941697
fbshipit-source-id: 05efbe1
Summary:
Despite what the sqlite manual says, it looks like it's possible for sqlite not
to remove the -shm and -wal files after a successful termination.
Close the database and clean them up in Buck mode so that they do not perturb
the cache.
Reviewed By: martinoluca
Differential Revision: D5953967
fbshipit-source-id: 9068b01
Summary:
Inject a marker using a global variable in <iostream>, and whitelist it so that
the frontend translates it.
Use the marker in the SIOF checker to tell whether a file includes <iostream>.
If so, start the analysis of its methods assuming that the standard streams are
initialised.
Reviewed By: sblackshear
Differential Revision: D5941343
fbshipit-source-id: 3388d55
Summary:
The previous domain for SIOF was duplicating some work with the generic Trace
domain, and basically was a bit confused and confusing. A sink was a set of
global accesses, and a state contains a set of sinks. Then the checker has to
needlessly jump through hoops to normalize this set of sets of accesses into a
set of accesses.
The new domain has one sink = one access, as suggested by sblackshear. This simplifies
a few things, and makes the dedup logic much easier: just grab the first report
of the list of reports for a function.
We only report on the fake procedures generated to initialise a global, and the
filtering means that we keep only one report per global.
Reviewed By: sblackshear
Differential Revision: D5932138
fbshipit-source-id: acb7285
Summary:
Wrap ANSITerminal so that it doesn't apply control codes unless they can be
interpreted, and so that clients are unable to call ANSITerminal directly.
Reviewed By: mbouaziz
Differential Revision: D5953733
fbshipit-source-id: 6b3602a
Summary:
Bottom bounds do not make sense (what is the meaning of `[_|_; 1]`?), let's get rid of them.
`Bot` was useful for substitution though, with a special meaning, use `bottom_lifted` for that case.
Reviewed By: skcho
Differential Revision: D5941796
fbshipit-source-id: 5778255
Summary: A bottom interval in a safety condition doesn't make sense. Let's not allow it at all.
Reviewed By: skcho
Differential Revision: D5941552
fbshipit-source-id: 6bd2a65
Summary: If we know for sure we won't need to store an attribute in the DB, there's no need to compute its marshalled value.
Reviewed By: jberdine
Differential Revision: D5891050
fbshipit-source-id: cf4534e
Summary:
This adds more structure to the SQL schema backing attributes. With that, we
can transfer the logic for updating attributes in SQLite, instead of doing
optimistic concurrency in the client.
Reviewed By: jberdine
Differential Revision: D5891038
fbshipit-source-id: 6577ba2
Summary:
- use a similar key as for specs in the attributes table
- cache blob computations
- this improves memory usage a lot
Reviewed By: mbouaziz
Differential Revision: D5824177
fbshipit-source-id: c318577
Summary:
Preparing statements allocates memory and is generally best done once and for all.
We need to re-prepare statements when opening a new DB connexion (after each fork).
Reviewed By: mbouaziz
Differential Revision: D5824157
fbshipit-source-id: 4d239ac
Summary: Not sure if useful but seems sensible. It disappears at the top of the stack when we do merging in SQL.
Reviewed By: mbouaziz
Differential Revision: D5824131
fbshipit-source-id: fd64752
Summary: Use `pp` functions until it needs to be turned into a string.
Reviewed By: jvillard
Differential Revision: D5941473
fbshipit-source-id: 87ca9df
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
Its value is unused in Infer and is constantly emitted as None from facebook-clang-plugins, so it was also removed from facebook-clang-plugins (a96c39601f)
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D5940900
fbshipit-source-id: e7fd6ae
Summary: Remove functions that are redundant with Base.List functions on sorted lists.
Reviewed By: mbouaziz
Differential Revision: D5931792
fbshipit-source-id: caec210
Summary: The case of closures was not considered for the convertion of SIL instructions into HIL instructions
Reviewed By: sblackshear
Differential Revision: D5929675
fbshipit-source-id: bb6920a
Summary: These folders are left empty when linting, so better not create them.
Reviewed By: jvillard
Differential Revision: D5921418
fbshipit-source-id: f6efc4f
Summary: The tests are slower when running in debug mode, and it creates a lot of html outputs
Reviewed By: sblackshear
Differential Revision: D5916511
fbshipit-source-id: 07c90b7
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Sam Blackshear
Peter O'Hearn
Jules Villard
Mehdi Bouaziz
vsilyaev@broadcom.com
Dulma Churchill
Jeremy Dubreil
Vivek Dhiman
Daiva Naudziuniene
Dino Distefano
Philip Cohn-Cort
Angel (scout387)
Josh Berdine
Martino Luca
Stephan Walters
anuolu
Dominic Cooney
Sungkeun Cho
Anders Papitto
Kyriakos Nikolaos Gkorogiannis