Summary:
This diff does a refactoring on the function that gets summary from DB,
`get_proc_summary_and_formals`.
* It separates the function into `get_summary` and `get_formals`, and
* renames `Checker.get_proc_summary` to `get_checks_summary`
Reviewed By: ngorogiannis
Differential Revision: D19300136
fbshipit-source-id: d28eaf16d
Summary:
This diff creates missing result directories in its running.
The problem was that `infer-out/captured` and its sub-directories were not ready at the step 3 below, which crashed with exceptions.
1. `infer capture -- [target build]`
2. `infer analyze --merge`
3. `infer analyze --merge --debug --reanalyze --procedures-filter '.*foo.*'`
Reviewed By: ngorogiannis
Differential Revision: D19274672
fbshipit-source-id: af84000d7
Summary: Pulse doesn't care about exceptions yet. With Exceptional CFG, java analysis takes a lot of time due to having many disjuncts. Let's use Normal CFG for now.
Reviewed By: jvillard
Differential Revision: D19194479
fbshipit-source-id: f94bb6078
Summary:
Kill these tests as that mode is not supported anymore.
Note that :
- "buck_cross_module" was effectively already dead since it's not hooked up to `make test`
- "buck" is actually another copy of "genrule" so wasn't testing anything
Reviewed By: ngorogiannis
Differential Revision: D19176166
fbshipit-source-id: b5bb90448
Summary:
This changes how we select amongst our (currently) 4 Buck integrations
for Java and clang, as well as how the user's choice is reflected by the
Config module.
The old command line interface is still supported but is now deprecated.
The changes in how to select each integration are:
- clang via "flavors", activated with `--flavors`, now with `--buck-clang`
- clang via "compilation DB", activated with `--buck-compilation-database`, unchanged
- Java via "genrule", activated with `--genrule-master-mode`, now with `--buck-java`
- Java "without genrules", used to be activated by *not specifying any other Buck mode*, unchanged
Instead of various `Config` flags corresponding to the previous CLI that
are allowed in any combination of `flavors`,
`buck_compilation_database`, `genrule_master_mode`, `Config` now exposes
a single `buck_mode` datatype. This allows, eg, `flavors` to override
`buck_compilation_database` if needed. It will also make it easier to
get rid of the old "Java without genrules" integration in a later diff
(see inline comments).
Reviewed By: ngorogiannis
Differential Revision: D19175686
fbshipit-source-id: 29b3831be
Summary:
We cannot necessarily know if the previous capture phase was java or
clang, hence to be on the safe side we should always merge the global
tenvs when merging Buck targets.
Reviewed By: ngorogiannis
Differential Revision: D19175685
fbshipit-source-id: 8e7492e14
Summary:
This generates a lot of code (the datatype is not trivial) and
transitively requires other datatypes to have compare functions, just so
we can then ask whether the mode is "Analyze".
Reviewed By: ngorogiannis
Differential Revision: D19164589
fbshipit-source-id: be6a12b41
Summary:
Infer would crash when started in a context where it already had
children it didn't know about.
Reviewed By: martintrojer
Differential Revision: D19177589
fbshipit-source-id: 0c8831597
Summary:
In order to improve the impurity analysis, this diff adds models for
- `hasNext()` and - `Object.equals()` modeled as returning a non-deterministic value (havoc_id)
- `next()` modeled as `StdVector.get` with a fresh index
- `iterator` modeled as just returning the underlying list
Reviewed By: jvillard
Differential Revision: D19177392
fbshipit-source-id: 0babb037a
Summary:
This diff updates the relation between iterator (offset) and integer value not only at
assignments (`x += 1`), but also at function calls (`foo()`) that increase integer values by one in
their side effects.
Reviewed By: ezgicicek
Differential Revision: D19163214
fbshipit-source-id: 47e52f939
Summary: This diff extends the domain to express the relation between iterator's offset and integer value.
Reviewed By: ezgicicek
Differential Revision: D19143670
fbshipit-source-id: 6223bc934
Summary:
Old versions of sawja/javalib got the line numbers slightly wrong. The workaround was to do a regexp search in the source file for the right line.
My understanding is that this is no longer necessary. This diff removes it.
Reviewed By: jvillard
Differential Revision: D19033415
fbshipit-source-id: 2da19d66d
Summary:
From a set of classes [classes], JClasspath.load_program builds a
program. This program contains (implicitely) the set of active classes
and we should not keep using the set [classes] and the generated
program as the same time, because they may not be synched
anymore. (In particular, in a forthcoming diff load_program may add
new classes during program construction)
This patch forces this discipline. It adds a [in_classes]
query for programs and makes sure we use it everywhere we should.
Reviewed By: ngorogiannis
Differential Revision: D18833335
fbshipit-source-id: a522f320c
Summary:
This is an optimization. We ask the user to tell us which states are nondeterministic, and we
generate code that handle nondeterminism only for those states. It is common for only one state per
TOPL property to be nondeterministic. This speeds up the biabduction-analysis of the monitor by a
factor of ~10. But, using the monitor is only a little faster.
Facebook
Reviewed By: jvillard
Differential Revision: D19160286
fbshipit-source-id: 4dd39769a
Summary:
The re-execution phase uses only the preconditions found by the footprint phase. Thus, Infer should
not spend time optimizing POSTconditions. These are used only to find custom errors.
Reviewed By: jvillard
Differential Revision: D19035495
fbshipit-source-id: d52b82733
Summary:
Move most of IR/Sil.ml into a new file biabduction/Predicates.ml to
reflect the fact that they are only useful for the biabduction analysis.
Unfortunately this is a huge change.
I tried to keep the change to a minimum, it's mostly about doing
s/Sil/Predicates/ in lots of places but sometimes I used the trick of
specifying parameters or return value types to avoid specifying the
module altogether. This isn't done consistently because there were just
too many places to change for poor me.
Reviewed By: ngorogiannis
Differential Revision: D19158530
fbshipit-source-id: d6dbcfe72
Summary:
hmmhmmhmm
Also `Sil.hpred` is going to move out of IR/ in a few diffs, into
biabduction/ where it belongs.
Reviewed By: ngorogiannis
Differential Revision: D19158535
fbshipit-source-id: e2a889ee2
Summary:
Part of making Sil.ml about SIL only.
In order to not introduce a dependency istd/Pp -> base/Config, the
utilities in Pp don't know when to introduce "diff" colours. Fix it by
wrapping them in Sil using the Config option. (we may want to just kill
that option at some point).
Similarly, move stuff from Io_infer to Pp.
Reviewed By: ngorogiannis
Differential Revision: D19158534
fbshipit-source-id: 8110cb7f9
Summary:
In the previous code, it removed non-build-called method calls. For example, it was like
```
{non-build-called: {prop1, prop3}}
{build-called: {}}
b.build();
{non-build-called: {}}
{build-called: {prop1, prop3}}
```
However, this behavior introduced a false positive when there is multiple builders that point to the
same abstract object and `build` is called one by one.
This diff changes the semantics to keep the method calls of non-build-called at `build` calls.
Reviewed By: ezgicicek
Differential Revision: D19144525
fbshipit-source-id: e2ace127f
Summary:
At some point, code reformatting moved the comment
in a place where it didn't make sense.
Reviewed By: ngorogiannis
Differential Revision: D19035489
fbshipit-source-id: 146ad8a15
Summary:
This applies some simplifications that were previously
done after footprint (and therefore lost), and some
simplifications that require looking at both pre and
post.
Reviewed By: ngorogiannis
Differential Revision: D19035494
fbshipit-source-id: bad79534a
Summary:
This havocs event data, so that biabduction doesn't try to
track what was the last event processed by the monitor
(which is redundant as long as the state of the monitor
is tracked).
Reviewed By: ngorogiannis
Differential Revision: D19035491
fbshipit-source-id: a1c75daae
Summary:
Don't instrument SIL when we can determine statically that
biabduction symexec would be a no-op.
Reviewed By: ngorogiannis
Differential Revision: D19116849
fbshipit-source-id: 4d25462a3
Summary: It is confusing to report missing props at the the beginning of the method (especially when there are many components created or when the method has many lines). Let's report them at create methods to better contextualize. Also, make the missing prop bold.
Reviewed By: skcho
Differential Revision: D19141135
fbshipit-source-id: a23d2e7c9
Summary:
It used to recompute the number of arguments during
instrumentation, which is unnecessary.
Reviewed By: ngorogiannis
Differential Revision: D19035492
fbshipit-source-id: 0f58c8ae7
Summary:
In addition to
state1 -> state2: pattern
one can now also write
state1 -> state2: pattern if condition
where "condition" is some conjunction of comparisons (==,<,>) that
involve variables bound by "pattern", registers of the automaton, and
constants.
Reviewed By: ngorogiannis
Differential Revision: D19035496
fbshipit-source-id: 6f6e6a9be
Summary:
The one with Object as the second param is in `com.facebook.common.internal`.
The one with String as the second param is in `com.facebook.common.preconditions`.
(Don't ask :) )
Reviewed By: artempyanykh
Differential Revision: D19087334
fbshipit-source-id: ba02c9101
Summary:
According to Java semantics, they are always non-null.
Internally they are represented as static fields, so they have
DeclaredNonnull nullability, which means NullsafeStrict mode would
refuse to use them without strictification.
Lets teach nullsafe that these guys are non-nullables.
See also FN in test case.
Reviewed By: ngorogiannis
Differential Revision: D19024547
fbshipit-source-id: 8c120fa50
Summary:
Inferbo does not use the external relational domains, apron and elina. At some point, the parts of
inferbo using them were broken and they do not seem to be fixed easily in the near future. Let's
remove them and keep the code base cleaner.
Reviewed By: jvillard
Differential Revision: D19022905
fbshipit-source-id: e0eafe79f
Summary:
We do not have the create method in the trace which makes it difficult to understand
- inter-procedural issues where create and prop setting are in different methods
- there are multiple create-build chains in a method
Let's add the create to the beginning of the trace. Moreover, let's simplify the prop printing to make traces easier to understand.
Reviewed By: ngorogiannis
Differential Revision: D19020213
fbshipit-source-id: 7f8a5d4ec
Summary: The new domain is much better than the old one. Let's kill the old one (along with old litho tests) and simplify things.
Reviewed By: skcho
Differential Revision: D18959627
fbshipit-source-id: df77ae20e
Summary:
- Remove `to_flat_string` as there is `get_field_name` that unambiguously does the same thing.
- Make `pp` print only the field in all languages.
- Fix `to_full_string` so that it has unified behaviour across java/clang and so that it doesn't print `class Foo.x`, but rather `Foo.x`.
Reviewed By: ezgicicek
Differential Revision: D18963033
fbshipit-source-id: e2c803c7d
Summary:
Remove Clang and Java submodules of Typ.Fieldname. They are unnecessary and they reflect a fake dichotomy: there is only one fieldname type. To distinguish between fields of Java classes and other C constructs, there is a helper function provided, but the idea is simple: obtain the class type the field belongs to, and check if it's a Java class.
This diff still preserves behaviour, but removes as many functions as possible from the interface, to leave a small surface.
Reviewed By: mityal
Differential Revision: D18962423
fbshipit-source-id: ffe6933ee
Summary: Unify treatment of Java and Clang fieldnames. Now a field is a struct with a class type-name and a string-field name. This diff is still behaviour preserving.
Reviewed By: jvillard
Differential Revision: D18953549
fbshipit-source-id: 8cae0d104
Summary: This function allows any string, and in particular empty class names. As a first step eliminate it in favour of a function that forces the caller to specify distinct class and field names. It turns out that the frontend already has them, so it saves effort along the way.
Reviewed By: jvillard
Differential Revision: D18953136
fbshipit-source-id: ff3cdfda5
Summary:
In order to handle the example added:
changed domain of `MethodCalled`
from `CreatedLocation -> (IsBuildCalled X IsChecked X Set(MethodCall))`
to `(CreatedLocation X IsBuildCalled) -> (IsChecked X Set(MethodCall))`
This avoids joining of two method calls where one is build-called and the other is not, e.g.,
```
if(b) {
o.build();
} else {
// no build call
}
```
changed domain of `NewDomain`
from `Created X MethodCalled`
to `(Created X MethodCalled) X (Created X MethodCalled)`
One is for no returned memory and the other is returned memory. This keeps precision some join
points of branches, e.g.,
```
if(b) {
return;
} else {
// no return
}
```
Reviewed By: ezgicicek
Differential Revision: D18909768
fbshipit-source-id: c39d1a1ef
Summary:
A plus is a plus, no need to give up when +/- is about pointers. This
gets rid of some false positives involving pointer arithmetic.
However, the problem remains if we make things a bit more
inter-procedural. This is documented in an added test.
Reviewed By: ezgicicek
Differential Revision: D18932877
fbshipit-source-id: 4ad1cfe72
Summary: It is not used anywhere and there are no plans to revive it. Kill it!
Reviewed By: skcho
Differential Revision: D18934719
fbshipit-source-id: b9b069b96
Summary: Under the buck/java integration, the classpath is propagated to all infer command lines. Logging that leads to huge waste and full disks. Make the logging conditional to debug mode.
Reviewed By: skcho
Differential Revision: D18934088
fbshipit-source-id: 7e2f410f5
Summary:
The `Typ.FIeldname` module has many issues. Among those:
- It has 5 different string/printing functions and most of them do radically different things in Java and in Clang.
- There is no type safety: creating a Clang field and calling a Java function on it will lead to a crash (`rindex_exn` etc, there are usually no dots in Clang fields).
- It uses a single string for Java fields, containing the package, the class and the field, e.g., `java.lang.Object.field`. This is wasteful, because
- there is no sharing of strings for packages/classes, and,
- string operations need to be performed every time we need the field or the class or the package alone.
This diff preserves the behaviour of the module's interface, so the API problems remain.
However, by using a saner representation for Java fields we can get small performance and large memory gains (the type environment in Java is much smaller, about 30-40%).
In addition, many functions on clang fields would previously do string manipulations (look for `.` and split on it) before returning the final field unchanged -- now they use the type of the field for that.
Reviewed By: jvillard
Differential Revision: D18908864
fbshipit-source-id: a72d847cc
Summary:
That class does some complicated accounting of memory that depends on
whether the string is "small", "medium" or "large". In the latter case
it does its own ref-counting and copy-on-write to save memory, and that
trips up pulse. Pretending all strings are small avoids that issue.
Reviewed By: skcho
Differential Revision: D18909030
fbshipit-source-id: 1c14d909b
Summary:
Including the current call state is useful because the contradiction
sometimes refers to abstract values that have been materialised since
the last call state so we cannot make sense of them unless we print the
current call state.
Reviewed By: skcho
Differential Revision: D18908424
fbshipit-source-id: 297f397a6
Summary:
- Do most of the work of `solve_arithmetic_constraints` inside `subst_attribute` instead, since we need to re-use the latter function for post-conditions where the first function is not appropriate.
- When substituting arithmetic constraints, we refine arithmetic information (both concrete intervals and inferbo), which can lead to inconsistent states. Instead of recording the new arithmetic facts by returning a new current state, just act as a map on attributes. This is to enable doing the point above.
- All this lead to a somewhat messy refactoring...
- Rename `CannotApplyPre` to `Contradiction` since it's used for post-conditions as well now
Reviewed By: skcho
Differential Revision: D18889120
fbshipit-source-id: d81647143
Summary:
After passing a `PRUNE` instruction we can refine the current inferbo
intervals for the values involved.
Reviewed By: ezgicicek
Differential Revision: D18889103
fbshipit-source-id: b521046aa
Summary:
This exposes a more general interface to other modules, at the cost of
hiding the fact that it won't deal with all binary operations with equal
precision.
Reviewed By: ezgicicek
Differential Revision: D18908095
fbshipit-source-id: 0c0653bb6
Summary: Guava uses assertions to ensure a future can be gotten without blocking (this means that if the future is not done, the app will crash). This diff teaches the starvation analyser about a number of such assertions, by treating them as assumes (since we don't care about exceptions).
Reviewed By: jvillard
Differential Revision: D18893427
fbshipit-source-id: 4d26a202b
Summary: A future is guaranteed not to block if `isDone()` has returned true first. Add logic for supporting that by remembering the objects that we have called `isDone` on and by making `assume` do the right thing with that knowledge. All this is achieved with the attribute domain.
Reviewed By: ezgicicek
Differential Revision: D18833901
fbshipit-source-id: 7f4ea0cd1
Summary: The formals of callees will be used in the following diff.
Reviewed By: ezgicicek
Differential Revision: D18878044
fbshipit-source-id: 6c01af826
Summary:
When retrieving a value from a container, we previously had an arbitrary hack which would
- In java, give no ownership to the returned object (trying to be sound)
- In C++ give conditional ownership to the current method's first argument (trying to be complete, but doing it badly, as the first argument may not be the `this` object in a static method, or we might be accessing it through another parameter altogether).
Harmonise both by using the existing ownership of the container as ownership value for the returned object (leaning towards completeness).
Reviewed By: jvillard
Differential Revision: D18882800
fbshipit-source-id: f98f8d315
Summary:
Every time we add an arithmetic information, add the corresponding
inferbo one.
Reviewed By: skcho
Differential Revision: D18888863
fbshipit-source-id: ab4afd372
Summary:
Pointers are hard... The previous test had no chance of doing
initialisation of the pointer by reference and was in fact a false
negative (and still is, fix incoming). Renamed functions to stress the
false negative and added a test that is really (potentially) doing
pointer initialisation by reference.
Reviewed By: skcho
Differential Revision: D18888008
fbshipit-source-id: 1e72408c7
Summary:
This reverts commit 4fd6165d190bab32544f9f040b777565432c15b2.
We don't need to check for reporting each node anymore. It suffices to just check per function.
Reviewed By: skcho
Differential Revision: D18883833
fbshipit-source-id: 2591b3af3
Summary:
Making `MethodCalled` an inverted map from created location to method calls results in not being able to track a builder that is created in two different branches of a conditional with different types. Instead, we can make `MethodCalled` simply a map and also change `Created` to be a map from access paths to a set of created locations.
To deal with the case of setting a prop only in one branch, we need to ensure that whenever we call a create method, we add a binding to `MethodCalled` with an empty list of methods so that its intersection with a non-empty one is empty.
Reviewed By: skcho
Differential Revision: D18883097
fbshipit-source-id: b3464ca20
Summary: As long as the types match, it should be possible to call build on two components that are created at different locations.
Reviewed By: skcho
Differential Revision: D18881740
fbshipit-source-id: 356f9e168
Summary:
Finally use information from the inferbo intervals in pulse's domain to
make decisions about whether conditionals are feasible or not.
Reviewed By: skcho
Differential Revision: D18811193
fbshipit-source-id: d80a28657
Summary:
Refine the type of inferbo intervals attributes to "pure" (non-bottom)
ones. This is because were we to get a Bottom value from inferbo we
should stop the abstract execution instead of recording it in the state.
Reviewed By: ezgicicek
Differential Revision: D18811165
fbshipit-source-id: fff8664b7
Summary:
Similarly to binops, let inferbo evaluate unary operations and record
the results.
Reviewed By: ezgicicek
Differential Revision: D18811146
fbshipit-source-id: 8f9e16bbd
Summary: Add a FN that is detected by the old domain but not the new one
Reviewed By: ngorogiannis
Differential Revision: D18854389
fbshipit-source-id: 9bdc90a6b
Summary: The map from `CreatedLocation` to `MethodCalls` already takes care of the association from create methods to their set props. `MethodCall` comparison should be oblivious the the receiver, otherwise, we risk mistakenly considering two props set at different locations as different.
Reviewed By: skcho
Differential Revision: D18829388
fbshipit-source-id: b5a0d628d
Summary: This diff check and report on every nodes. Problem of the previous design is that it has to report alarms only with the abstract memory of the exit node. However, the new abstract value becomes imprecise at every join points on the path to the exit node, since it is using inverted map, i.e., under-approximation on collecting called methods. As a solution, this diff report on every nodes where `.build` is called with the abstract memory at that node.
Reviewed By: ezgicicek
Differential Revision: D18809449
fbshipit-source-id: 4fd6165d1
Summary: Current method call comparison is too strong. As exemplified with the new test, one can also set the required prop by calling a version which contains the suffixes. The domain should take care of such cases now.
Reviewed By: skcho
Differential Revision: D18808869
fbshipit-source-id: 9f7672e75
Summary:
Sometimes clang9 does not return a boxing method (a name of function to apply), e.g., [@("str")].
To solve the issue, this diff uses "unknownSelector:" instead of giving up the translation.
Reviewed By: dulmarod
Differential Revision: D18831844
fbshipit-source-id: b9324ba39
Summary: This enables us to quickly pick up the Component typ when checking which required props to check.
Reviewed By: skcho
Differential Revision: D18807925
fbshipit-source-id: 47e407394
Summary: This diff checks litho condition on the new abstract value. This is triggered with `--new-litho-domain`, but it is intra-procedural as of now.
Reviewed By: ezgicicek
Differential Revision: D18783203
fbshipit-source-id: 98570104e
Summary: This diff adds a map from an object to a set of methods that has been called.
Reviewed By: ezgicicek
Differential Revision: D18781461
fbshipit-source-id: 47c10adaa
Summary: This adds a map from access expressions to locations where specific object is created by `create` method call.
Reviewed By: ezgicicek
Differential Revision: D18779985
fbshipit-source-id: f327450cd
Summary: This diff stack is to revise overall domain and semantics of litho checker. Some of the following diffs will not have visible changes until we replace the current checker with the new one.
Reviewed By: ezgicicek
Differential Revision: D18779592
fbshipit-source-id: d210d9bd1
Summary:
This can happen for a number of reasons that are not errors (mostly the exit node being unreachable) so isn't actionable, and definitely not worth showing the user. It could be a debug message but I don't think that's even worth it. Other checkers don't warn in similar circumstances.
With OCaml 4.08 we started actually seeing these error messages (differences in flushing behaviour?) so their annoying nature was revealed.
Reviewed By: ngorogiannis
Differential Revision: D18808460
fbshipit-source-id: a47a1dcb4
Summary:
Also add logic for recognising excessive timeouts. Refactor the code
around timeouts a little.
Reviewed By: artempyanykh
Differential Revision: D18807836
fbshipit-source-id: df5a1b566
Summary:
`Object.wait()` must be called on a locked monitor and it releases the
lock immediately, as far as other threads are concerned
(it also magically re-takes the lock when the monitor is `notified`).
Starvation can only occur if the UI thread is waiting
a lock that is distinct to that being waited on.
The check present was over-approximate in that it was checking that there exists a lock held by the UI thread and the thread issuing the `wait`, but did not make sure that lock was *not* the one waited on.
Amusingly, the e2e test was correct, but the reporting code wasn't.
Reviewed By: dulmarod
Differential Revision: D18782919
fbshipit-source-id: b3b98239e
Summary: The clang plugin exports C++ mangled names in hashed form for perf reasons, so we need to hash the incoming mangled names in the profiler samples, so that we can compare them.
Reviewed By: skcho
Differential Revision: D18761842
fbshipit-source-id: 3072b5e33
Summary: Similar to constructor established attributes, we do the same here for static initializers. That is, attributes of static properties are injected into the initial state of every method.
Reviewed By: ezgicicek
Differential Revision: D18763192
fbshipit-source-id: 3879a27c5
Summary:
For now lets support the simplest form: "//"-style comments.
Having comments is useful:
1. It serves as documentation for API.
2. It serves as justification of why such and such method or param is
nullable or not (so the future readers can understand the reasoning of
the person who added the signature).
Reviewed By: artempyanykh
Differential Revision: D18762289
fbshipit-source-id: 90c515ea8
Summary: Raises an error when weakSelf is used multiple times in a block. The issue is that there could be unexpected behaviour. Even if `weakSelf` is not nil in the first use, it could be nil in the following uses since the object that `weakSelf` points to could be freed anytime.
Reviewed By: skcho
Differential Revision: D18765493
fbshipit-source-id: 37fc652e3
Summary:
This diff enables parsing and auto-formatting documentation
comments (aka docstrings).
I have looked at this entire diff and manually made some changes to
improve the formatting. In some cases it looked like it would take too
much time, or benefit from someone more familiar with the code doing
it, and I instead disabled auto-formatting docstrings in those files.
Also, there are some source files where the docstrings are invalid,
and some where the structure detected by the parser appears not to
match what was intended. Auto-formatting has been disabled for these
files.
Reviewed By: ezgicicek
Differential Revision: D18755888
fbshipit-source-id: 68d72465d
Summary:
RacerD is angelic in the sense that when a method has no summary, no accesses are added to the symbolic state when we call that method. However, when the method returns an object we then proceed to access, this leads to non-angelic behaviour: if the object is assumed to be un-owned, then the accesses may lead to a race.
This manifests itself on Litho components, which are generated code without sources and thus RacerD has no CFG to analyse, and therefore produces no summary. The `Builder` patterns used in these classes are ubiquitous, and full of spurious races due to the fact that the returned objects, even though freshly allocated, are un-owned as far as RacerD knows.
Here, instead of going full-angelic and assuming that every method without a summary returns an owned object (which is a bit extreme), we try to model the `Builder` pattern wrt ownership. That is, static `create` methods returning `Builder` types are assumed to return full ownership; and, non-static methods of a `Builder` class which return the same type as their receiver are assumed to return conditional ownership.
Reviewed By: ezgicicek
Differential Revision: D18748423
fbshipit-source-id: bd53d4b67
Summary: This diff extends the bound domain to express multiplication of bounds in some simple cases.
Reviewed By: ezgicicek
Differential Revision: D18745246
fbshipit-source-id: 4f2dcb42c
Summary:
One standard way to schedule work is by starting a thread. We treat this by
- Treating invocations of `start` on a receiver with the `Runnable _` attribute as scheduling that runnable for parallel execution in the background (as opposed to on the UI thread).
- If `start` is used on an object of a subclass of `Thread` everything already works thanks to the `get_exp_attributes` function which will implicitly ascribe to an expression the attribute `Runnable _` if the expression points to an object with a known `run` method. This will even take care of some degree of dynamic dispatch, yay!
- If `start` is used on a `Thread` object which has been created with a constructor call provided with a `Runnable` argument, we have to appropriately model that constructor call, which is what is done in `do_call`.
Reviewed By: jvillard
Differential Revision: D18726676
fbshipit-source-id: 0bd83c28e
Summary:
A current blind spot is when object construction stores specific executors / runnables to object fields, which are then never mutated and accessed from normal methods. IOW the attributes established in the constructor are necessary to report properly inside a normal method (assuming these attributes are not invalidated by method code).
To achieve this, first we retain a subset of the final state attributes in the summary (only those that affect instance variables, in constructor methods). Then, when we analyse a non-constructor method:
- we analyse all constructors
- remove all attributes from the attribute map whose key is not an expression of the form `this.x. ...`
- re-localise all remaining keys so that they appear as rooted in the `this` local variable of the current procedure
- join (intersect) all such attribute maps
- use the result in place of initial state as far as the attribute map is concerned for the analysis of the current procedure, which can now start.
This means we can catch idioms that use side-effectful initialisation for configuring certain object fields like executors or runnables.
Reviewed By: jvillard
Differential Revision: D18707890
fbshipit-source-id: 42ac6108f
Summary: Another way to schedule work in android is by posting it to a `Handler`. A handler can be constructed out of the main looper, which forces it to schedule work on the UI thread. To model all this, we add syntactic models for getting the main looper and for creating handlers, and dataflow attributes for tracking that an expression is a looper/the main looper, or a handler constructed out of a looper.
Reviewed By: skcho
Differential Revision: D18706768
fbshipit-source-id: 7c46e6913
Summary:
We already have a number of `[pkg].Preconditions.checkNotNull`
modelled, but the one from `androidx` is missing yet widely used.
Reviewed By: mityal
Differential Revision: D18748550
fbshipit-source-id: 83d3317ae
Summary:
The introduction of inferbo intervals as pulse attributes creates the
first relational attributes. To make sense of inferbo intervals
appearing in summaries when in a caller context, we need to substitute
the abstract values they contain in the callee with the abstract values
they correspond to in the caller.
This has a significant consequence: we have to delay the check that
arithmetic constraints in the callee are satisfiable at the call-site
until *after* we have discovered all the relationships between callee
values and caller values from the heap. To solve this, we now run an
arithmetic constraints check *after* having materialised all the
addresses.
We also need to translate the abstract values in the attributes in the
post before recording them in the caller, for the same reasons.
Quite some code in this diff is concerned with substituting pulse values
inside inferbo intervals. There is a complication there too: even after
having discovered relationships between caller and callee abstract
values induced by the heap shapes, there could be abstract values in the
callee's attributes that we haven't seen yet. We need to make up new
values for these in the caller, so this substitution has to return a
potentially extended substitution.
Reviewed By: skcho
Differential Revision: D18745695
fbshipit-source-id: 077ae7670
Summary:
New syntax f1 AND-WITH-WITNESSES f2 : predicate_on_both_witnesses()
This is needed for a linter to check that a macro is present, see the test.
Reviewed By: skcho
Differential Revision: D18735988
fbshipit-source-id: a3be75c5e
Summary:
This gets rid of false positives when something invalid (eg null) is
passed by reference to an initialisation function. Havoc'ing what the
contents of the pointer to results in being optimistic about said
contents in the future.
Also surprisingly gets rid of some FNs (which means it can also
introduce FPs) in the `std::atomic` tests because a path condition
becomes feasible with havoc'ing.
There's a slight refinement possible where we don't havoc pointers to
const but that's more involved and left as future work.
Reviewed By: skcho
Differential Revision: D18726203
fbshipit-source-id: 264b5daeb
Summary:
It's a well-known fact that pulse should know too. To avoid splitting
the abstract state systematically, only act if we know the pointer is
exactly 0 to avoid reporting a nullptr dereference on `free(x)`.
Reviewed By: ezgicicek
Differential Revision: D18708575
fbshipit-source-id: 1cc3f6908
Summary:
Turns out code uses atomics in important places, modelling it removes
FPs.
The tests are copied from biabduction and adapted and extended a bit. I
didn't implement compare_exchange primitives for now (plus, giving them
a sequential semantics like in biabduction is probably a bit cheeky).
Reviewed By: skcho
Differential Revision: D18708576
fbshipit-source-id: a3581b8a4
Summary: This extends semantics of binary operator for BoItv. If there is no known interval value for a pulse value, it returns a symbolic value of the pulse value.
Reviewed By: jvillard
Differential Revision: D18726768
fbshipit-source-id: ed8ecf78b
Summary:
This diff adds inferbo's interval values to pulse's attributes. The added values will be used to
filter out infeasible passes in the following diffs.
Reviewed By: jvillard
Differential Revision: D18726667
fbshipit-source-id: c1125ac6e
Summary:
This will make our analysis more precise. E.g. in the future we can classify
"condition redundand" warnings by origin, and warn only for
InferredNonnull, or autogenerate fixes based on the origin.
Error messaging does not currently take into account origin for nonnull
types, but this can be changed in the future
Reviewed By: ngorogiannis
Differential Revision: D18685304
fbshipit-source-id: 6a1f263f5
Summary: The debugger in the middle of the evaluation makes working on that file difficult. Separating modules a bit, so that we can change the code easier. This is in preparation to trying to add aliases and witnesses to formulas in a next diff.
Reviewed By: jvillard
Differential Revision: D18708542
fbshipit-source-id: 523f30fc9
Summary: The tableaux evaluation was an experiment and it was turned off because of bad perf. Let's kill it to clear up the code.
Reviewed By: jvillard
Differential Revision: D18708388
fbshipit-source-id: 099f5a3d3
Summary:
This diff fixes the model of substring.
Problem: The cost model of the substring function was to return `size of string - start index` as a
cost. However, sometimes this was a negative number, because of state abstractions on paths, array
elements, call contexts, etc, which caused an exception inadvertently.
This diff changes the model to return just `size of string`, when it cannot say `size of string` is
bigger than `start index`.
Reviewed By: ezgicicek
Differential Revision: D18707954
fbshipit-source-id: 63f27e461
Summary: Rather than repeatedly matching actuals, let's use `ProcnameDispatcher.ModeledCall` to pick up the actual arguments with their corresponding values. This simplifies the models.
Reviewed By: jvillard
Differential Revision: D18685855
fbshipit-source-id: 7788bd8bb
Summary: This diff removes `'markers` and `'captured_types` from the procname dispatcher. They are for checking an integrity when a type is captured from template parameters then it is used to match in parameters. However, we have not used that feature, so which simply complicates the types in the dispatcher without any gain at the moment.
Reviewed By: jvillard
Differential Revision: D18706254
fbshipit-source-id: f493778d7
Summary: Preperation diff to use `ProcnameDispatcher` for Pulse: it changes function arguments, i.e. `ProcnameDispatcher.Call.FuncArg`, to a record in order to track the value of arguments. To do that, it changes `ProcnameDispatcher.Call` into a functor so that we can parametrize over the type of the value without making changes upwards.
Reviewed By: jvillard
Differential Revision: D18590224
fbshipit-source-id: 6a13fbc1a
Summary:
This will allow us tune nullsafe behavior in a more fine-grained way.
See e.g. a follow up diff when we report errors more clearly.
Reviewed By: ngorogiannis
Differential Revision: D18683747
fbshipit-source-id: 7b5c42a03
Summary:
We were wrongly not supressing third-party calls in
case third party repo is provided: there was a bug in the function is_modelled_externally.
because of this we accidentally stopped supressing third party and
started to advertise it in non-strict mode.
we do plan doing that, but little bit further ahead :)
So let's add a param guiding this.
Reviewed By: artempyanykh
Differential Revision: D18658271
fbshipit-source-id: 703f2675b
Summary:
We will migrate to the new representation in the future, but for now
let's keep both active.
Reviewed By: artempyanykh
Differential Revision: D18657955
fbshipit-source-id: 9deb03f1f
Summary:
Instead of trying to figure out what runnable is directly passed to an executor,
use attributes to track the flow of a runnable. This has several advantages:
- Can track runnables across function return values.
- Can somewhat overcome the information loss under dynamic dispatch.
- Unifies handling with other attributes.
Reviewed By: skcho
Differential Revision: D18672676
fbshipit-source-id: a06a0e6ff
Summary:
- Unify treatment of modelled and annotated executors by making things go through attributes.
- Add a return attribute to summaries, so that we can track flows of thread guards/executors/future stuff through returned values.
- Dispatch modeled functions to model summaries.
This will help in following diffs where runnables will also go through attributes.
Reviewed By: skcho
Differential Revision: D18660185
fbshipit-source-id: e26b1083e
Summary:
The infer/src/c_stubs directory contains a dune-project file. This
causes ocamlformat to conclude that the root of the project is
infer/src/c_stubs, and there is no .ocamlformat file there, so it does
not apply to the Fnv64Hash.ml file.
(There is currently a bug where it does apply anyway, but it is fixed
in master.)
Reviewed By: dulmarod
Differential Revision: D18684831
fbshipit-source-id: bcb53ce94
Summary:
Some field types of structs are missing in Java. The reason is:
* When capture, empty struct types are added without their fields.
* The empty struct types are overwritten to the global tenv when merging all tenvs.
As a fix, this diff add a boolean field, `dummy`, in `Typ.Struct.t`, then avoids that non-dummy types are replaced by dummy types.
Reviewed By: ngorogiannis
Differential Revision: D18657323
fbshipit-source-id: 4a263f8e7
Summary:
This is a better home for knowing whether a function has sentinel args
according to its prototype declaration.
Reviewed By: dulmarod, artempyanykh
Differential Revision: D18573919
fbshipit-source-id: 13f58eaa2
Summary: Another dead flag that one could mistakenly think is accurate.
Reviewed By: dulmarod
Differential Revision: D18573925
fbshipit-source-id: 129a9cff5
Summary:
This was never set to true except in a wrong way in the Java frontend
(see previous diff).
Reviewed By: dulmarod
Differential Revision: D18573927
fbshipit-source-id: 4c9d1a855
Summary:
This seems just wrong: the assume statement can return if the expression
is true.
Reviewed By: skcho
Differential Revision: D18573921
fbshipit-source-id: 47a5b0ea0
Summary:
A plugin update allows infer to know when a function doesn't return
according to its attributes. This propagates this info all the way to
the attributes of each function, and then use this information in a new
pre-analysis that cuts the links to successor nodes of each `Call`
instruction to a function that does not return.
NOTE: The "no_return" `CallFlag.t` was dead code, following diffs deal
with that (by removing it).
Reviewed By: dulmarod
Differential Revision: D18573922
fbshipit-source-id: 85ec64eca
Summary:
This also prints the CFGs *after* pre-analysis for individual procedures
in infer-out/captured/<filename>/<proc>.dot. One can also look up the
CFGs before pre-analysis in infer-out/captured/proc_cfgs_frontend.dot.
Context: I want to add a pre-analysis that needs to look at proc
attributes inter-procedurally. For this to make sense it has to happen
*after* all of capture, and before analysis.
Thus, this diff brings back the lazy running of the pre-analysis like in
D15803492, except that we still make sure to run the pre-analyses
systematically regardless of the checkers being run by running the
pre-analysis from ondemand.ml. Also we don't need to re-introduce the
"did_preanalysis" proc attribute for the same reason that the
pre-analysis is now run once and for all by ondemand.ml (instead of each
individual checker back in the days).
This has the benefit of running the pre-analysis only when needed, and
the drawback that several concurrent processes analysing the same proc
descs will duplicate work. Since pre-analyses are supposed to be very
fast I assume that neither is a big deal. If they become more expensive
then the benefit gets bigger and the drawback is just the same as with
regular analyses.
Reviewed By: skcho
Differential Revision: D18573920
fbshipit-source-id: de350eaef
Summary: This diff get static value with `EMPTY` field from class initializer.
Reviewed By: ngorogiannis
Differential Revision: D18616588
fbshipit-source-id: 26414c9b2
Summary: When we see a call to schedule some work on an executor and we don't have evidence that it is on some specific thread (UI/BG), instead of dropping the work, assign it `UnknownThread` and treat it as running on the background by default.
Reviewed By: jvillard
Differential Revision: D18615649
fbshipit-source-id: e8bad64b6
Summary:
This allows us to move the CFG rendering to IR/.
The parts of that file concerning CFGs and those concerning Biabduction
specs were entirely disjoint, it turns out, so that was easy.
Reviewed By: jberdine
Differential Revision: D18573924
fbshipit-source-id: 0a5ab6478
Summary: Following D18351867, this diff adds more size alias: when initial array size is one.
Reviewed By: ezgicicek
Differential Revision: D18530598
fbshipit-source-id: 26d57fe30
Summary:
- more flexible API
- less error-prone thanks to named parameters
- also takes care of adjusting predecessors of the previous successors!
This fixes some (probably harmless) bugs in the frontends.
Reviewed By: dulmarod
Differential Revision: D18573923
fbshipit-source-id: ad97b3607
Summary: The transition HOLDS-NEXT WITH-TRANSITION Parameters was only implemented for ObjC methods, now it also works on function calls.
Reviewed By: jvillard
Differential Revision: D18572760
fbshipit-source-id: 06e615cbe
Summary:
Now we point to the root cause of the problem, and also provide
actionable way to solve the issue
Reviewed By: artempyanykh
Differential Revision: D18575650
fbshipit-source-id: ba4884fe1
Summary:
Two goals:
1. Be less assertive when speaking about third party code (it might be
written with different conventions).
2. Point to third party signatures folder so the users know how to
proceed
Reviewed By: artempyanykh
Differential Revision: D18571514
fbshipit-source-id: 854d6e746
Summary:
1/ We now support messaging for third-party: show file name and line
number
2/ We did not show information about internal models in case of param
calls
3/ Small change: we don't specify "modelTables.ml" anymore: no need to
expose implementation details
Reviewed By: artempyanykh
Differential Revision: D18569790
fbshipit-source-id: 28586c8ff
Summary:
In the follow up diff we will use it to render more informative
error message when type error is relevant to the fact that the code is
third-party
Reviewed By: artempyanykh
Differential Revision: D18569783
fbshipit-source-id: 4f6dcc404
Summary:
Let the functions return the modified storage, not unit.
It will play nicely with the next diff, which will add more data to
storage which will be non-mutable.
Reviewed By: artempyanykh
Differential Revision: D18569768
fbshipit-source-id: ade5685be
Summary:
Whole bunch of changes aimed to make error messages more clear and
concise.
1/ Wording and language is unified. We make errors sound more like a
type system violations, rather than linter reccomendations.
Particularly, we refrain from saying things like "may be null" - this is
a linter-style statement that may provoke discussions (what if the
developer knows it can not be null in this particular case).
Instead, we refer to declared nullability and nullability of actual values. This way, it is more clear that this is not a heuristic, this is how rules of a type-system work.
2/ Additionally, we drop things like field class in places when the
context should be clear by who looks at the error. We expect the user
sees the code and the error caption. So e.g. we don't repeat the word "field"
twice.
3/ In cases when we are able to retrieve formal param name, we include it for
usability.
4/ For Field not initialized error, we refer to Initializer methods:
this is a non-obvious but important nullsafe feature.
Reviewed By: artempyanykh
Differential Revision: D18569762
fbshipit-source-id: 9221d7102
Summary:
It make the message bit less heavy, and also it is kind of obvious that
it is origin.
In follow up diffs we will change the text so it is hopefully even more
obvious.
Reviewed By: artempyanykh
Differential Revision: D18527695
fbshipit-source-id: a305d547b
Summary:
1. We don't want to teach the users to ignore noise origin because
sometimes we are going to render something useful for them.
2. It just looks not cool.
Reviewed By: artempyanykh
Differential Revision: D18527694
fbshipit-source-id: 0ea248122
Summary:
By default `install` will always overwrite the destination, which in
particular makes the target looks newer to `make`. This was causing the
models to be rebuilt on every `make`.
Passing `-C` helps with that:
-C, --compare
compare each pair of source and destination files, and in some cases, do not modify the destination at all
Reviewed By: martintrojer
Differential Revision: D18574558
fbshipit-source-id: 40758d689
Summary: Android may spontaneously call these methods on the UI thread, so recognize the fact.
Reviewed By: ezgicicek
Differential Revision: D18530477
fbshipit-source-id: a8a798779
Summary:
First step towards a global analysis. A new command line flag activates the step in `Driver`.
The whole-program analysis is a simple, quadratic (inefficient-as-yet), iteration over all domain elements. However, it is restricted to those elements that are explicitly scheduled to run.
Reviewed By: skcho
Differential Revision: D17787441
fbshipit-source-id: 9fecd766c
Summary:
This diff also removes clumsy typeErr.origin_desc and improves interface
of TypeOrigin.
This will allow to render smarter error message, depending on the
context (see follow up diff).
Reviewed By: ngorogiannis
Differential Revision: D18527692
fbshipit-source-id: b7eb11db8
Summary:
Note: Disabled by default.
Having some support for values, we can report when a null or constant
value is being dereferenced. The particularity here is that we don't
report when 0 is a possible value for the address, or even if we know
that the value of the address can only be 0 in that branch! Instead, we
allow ourselves to report only when we the address has been *set* to
NULL (or any constant).
This is in line with how pulse deals with other issues: only report when
1. we see an address become invalid, and
2. we see the same address be used later on
Reviewed By: skcho
Differential Revision: D17665468
fbshipit-source-id: f1ccf94cf
Summary:
This was causing loads of false positives later in the stack.
Invalidating the address of the object seems to be enough here as it
doesn't break any tests.
Reviewed By: ezgicicek
Differential Revision: D18246090
fbshipit-source-id: 2ef9a6a5c
Summary:
This diff avoids unqualified variables by `ItvUpdatedBy` are qualified later. For example,
```
z = x & y;
z = z + 1;
```
While `z` should not be selected as a control variable, it wasn't, because it was qualified by the addition. This pattern introduces FPs in many cases.
Reviewed By: ngorogiannis
Differential Revision: D18505894
fbshipit-source-id: 13aec3008
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
We used to use default for this, which is both buggy and hard to
diagnose. Now we explicitly document nullsafe behaviour in this case.
Reviewed By: artempyanykh
Differential Revision: D18481220
fbshipit-source-id: 0b0cf8b38
Summary:
This diff excludes integer variables from control variables when their values are calculated by
binary operators.
Reviewed By: ezgicicek
Differential Revision: D18505826
fbshipit-source-id: 710533d4c
Summary: Adding a trace that includes when strongSelf was assigned to, and when it's used without a check.
Reviewed By: skcho
Differential Revision: D18506113
fbshipit-source-id: 778c4b086
Summary: Let's make UI/Cold start parts of the message bold to get more attention.
Reviewed By: jvillard
Differential Revision: D18504857
fbshipit-source-id: b0f199f55
Summary:
The variable strongSelf, because it is equal to a weak captured pointer, needs to be checked for null before being used, otherwise it could be null by the time the block is executed.
Added this check to the SelfInBlock checker, and removed it from biabduction.
We want to migrate all the objc checks from biabduction, so it will be easier to change and faster and more reliable. Moreover, this check is more general, it will flag any use of unchecked strongSelf, not just a dereference.
Reviewed By: skcho
Differential Revision: D18403849
fbshipit-source-id: a9cf5d80b
Summary:
There was a precision loss during the substitution of array block. For example:
Callee's abstract memory includes an array block as follows, where `a` is a parameter.
```
a.elements -> { a.elements[*] with a.elements.size }
```
Callers' abstract memory includes a pointer that may point to multiple array blocks.
```
c -> { x, y }
x.elements -> { x.elements[*] with x.elements.size }
y.elements -> { y.elements[*] with y.elements.size }
```
When the callee is called with the parameter `c`, the callees memory is substituted to:
```
x.elements -> { x.elements[*] with top , y.elements[*] with top }
y.elements -> { x.elements[*] with top , y.elements[*] with top }
```
because `a.elements[*]` was substituted to `{ x.elements[*] , y.elements[*] }`
and `a.elements.size` was substituted to `top ( = x.elements.size join y.elements.size )`.
This diff tries to keep the precision in the specific case, not to join the sizes of array blocks.
So now the same callee's abstract memory is substituted to:
```
x.elements -> { x.elements[*] with x.elements.size }
y.elements -> { y.elements[*] with y.elements.size }
```
Reviewed By: ngorogiannis
Differential Revision: D18480585
fbshipit-source-id: b70e63c22
Summary: Due to the weakness of the analysis which can't detect side-effecting prop setting (e.g. as in `builder.prop1(..)`), we currently have many broken chains that do do have any `create` method in their prefixes. Let's not report on these broken chains.
Reviewed By: skcho
Differential Revision: D18503523
fbshipit-source-id: 7506e34b7
Summary:
In some apps executors are obtained by calling standard framework methods (and not by using DI with annotations).
To treat this style, we need to
- Detect calls that return such executors (`do_executor_effect`) and tag the return result with an `Attribute` indicating that it is now an executor, plus what thread it uses.
- Use that information when calling `execute`, to resolve the executor, if any, and its thread (in `do_work_scheduling` via `AttributeDomain.get_executor_constraint`).
- All this requires a new domain component, mapping variables to attributes. This extends the component previously used for remembering whether a variable is the result of a check on whether we run on the UI thread.
At the same time, I un-nested some functions from the transfer function for readability.
Reviewed By: skcho
Differential Revision: D18476122
fbshipit-source-id: bc39b5c2f
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
This method was the last escape hatch for InferredNullability to
misreport about its origin.
Now each time we change nullability we provide origin that is consistent
with the nullability itself.
Reviewed By: artempyanykh
Differential Revision: D18453567
fbshipit-source-id: 3d9b7fa2e
Summary:
This is one of key diff in this refactoring stack.
Previously, we used to set nullability independently of type origin,
which opened doors for inconsistent states, bugs, and overcomplicated
code.
Now we have just two method left:
1. `create` -> the main one, yay
2. `set_nonnull` -> will get rid of this in the next diff.
Reviewed By: artempyanykh
Differential Revision: D18451950
fbshipit-source-id: edc485709
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
In this diff, we merely rename the value to clearly reflect its currect
usage.
In follow up diffs we are going to make usages of this instance more
restricted and concentrate them in several places in the code.
Reviewed By: artempyanykh
Differential Revision: D18451290
fbshipit-source-id: cf3773364
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
1. `Formal` was bit cryptic name.
2. Splitting method param and this makes a lot of sense. It is almost an
implementation detail that hey happen to come from "param" in the
method's signature.
3. Apart from others, this diff fixes a minor bug - we used to treat
this as DeclaredNonnull, which (in future) means suppressing legit warnings
like condition redundant. This would be an issue if we were to start
showing "high confidence" condition redundant warnings.
Reviewed By: ngorogiannis
Differential Revision: D18451294
fbshipit-source-id: acc295e3f
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
1. Make Field origin a record: consistent with Proc; more readable; will
add more elements in follow up diffs.
2. `Proc` is bit ambiguous: it is unclear if this is a method call result or param.
Let's make it clear that it is the result of a method call.
Reviewed By: ngorogiannis
Differential Revision: D18450188
fbshipit-source-id: c5abae3ad
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
Using `New` was definitely not a good idea here, we need a specific
data type value here.
Reviewed By: artempyanykh
Differential Revision: D18450174
fbshipit-source-id: 7ce7cc7e8
Summary:
This diff is a part of work teaching Nullsafe to explain decisions it's
making.
Introducing more specific origins will allow us to automatically infer
nullability based on type origin (in follow up diffs).
Reviewed By: ngorogiannis
Differential Revision: D18450165
fbshipit-source-id: 9dc0d25c0
Summary:
This diff uses `of_java_array_alloc` instead of `of_c_array_alloc`. Java's array does not have
offset and stride. While this simplifies abstract memories in Java, there is not visible changes I can think of.
Reviewed By: ezgicicek
Differential Revision: D18453474
fbshipit-source-id: 36bdf3daf
Summary:
We were not tracking static `create ` and `build` methods intra-procedurally in the analysis and we just looked up their summaries. This resulted in not having static `create` methods in the trace. Let's fix that by pushing static check into `satisfy_heuristic`.
This results in a few FPs, but such cases are not very common in the codebase.
Reviewed By: skcho
Differential Revision: D18451955
fbshipit-source-id: d4ccf46f5
Summary:
We consider Java collections to be like c++ std::vectors and add models for
- `Collections.get(..)`
- `__cast`
Reviewed By: skcho
Differential Revision: D18449607
fbshipit-source-id: 448206c84
Summary: `equals1` and `equals2` in `SafeInvertedMap.join` are references that indicate whether given parameters and the result is physically equal or not. This diff fixes a missing update of them.
Reviewed By: ezgicicek
Differential Revision: D18450680
fbshipit-source-id: bae19cbe9
Summary:
`getThis` is an idiom for allowing Builder sub-classes to jump through the hoops of covariance plus java generics with self types. It's declared as abstract in the (generic) inner `Builder` class of a root class, and subclasses declare generic `Builder`s that inherit from the generic root `Builder` and trivially implement this method by returning `this`. Obviously, this returns conditional ownership (if `this` is owned, then the return value is owned).
The way it's typically used is
```
T foo() {
...
return getThis();
}
```
However, because abstract methods need dynamic dispatch for proper summarisation, we miss all that. A workaround was been implemented in D8947992 (see that for context), but it was buggy -- it required that the LHS type in the assignment
```
lhs = this.getThis();
```
is the same as the type of `this`, but this is too strict (eg, when using casts).
Here, the condition is changed to requiring that the return type of the method is the same as the type of `this`.
We also avoid asking for the `procdesc` as everything needed is in the attributes.
Reviewed By: jberdine
Differential Revision: D18450737
fbshipit-source-id: e67f0495c
Summary:
It returns non-top value when one of the parameters of band is positive, i.e., `x & 255` returns
`[0, 255]` instead of top.
Reviewed By: ezgicicek
Differential Revision: D18448614
fbshipit-source-id: aaa298a66
Summary:
Let's introduce a set of new cost analysis issue types that are raised when the function is statically determined to run on the UI thread. For this, we rely on the existing `runs_on_ui_thread` check that is developed for RacerD. We also update the cost summary and `jsonbug.cost_item` to include whether a method is on the ui thread so that we don't repeatedly compute this at diff time for complexity increase issues.
Note that `*_UI_THREAD` cost issues are assumed to be more strict than `*_COLD_START` reports at the moment. Next, we can also consider adding a new issue type that combines both such as `*_UI_THREAD_AND_COLD_START` (i.e. for methods that are both on cold start and run on ui thread).
Reviewed By: ngorogiannis
Differential Revision: D18428408
fbshipit-source-id: f18805716
Summary:
This diff tries more narrowing during analysis in order to get preciser results on nested loops.
In the widening phase, it does narrowing a loop right after its widening, for each loops. In general, this may make the widening phase non-terminating because it keeps the abstract state from monotonely increasing to the fixed point in a finite number of iterations. To avoid that situation, this diff applies the narrowing only when the first visit of the loop in the widening phase.
Reviewed By: ngorogiannis
Differential Revision: D18400631
fbshipit-source-id: cc76f7e85
Summary: Sometimes there is a code like `for(int i = 1; i < x; i++){ l.add(); }`, where the first element in a list is addressed specifically. This case was not analyzed precisely, because the alias value is added only when `i` is initialized by 0 by heuristic. This diff extends the heuristic, so it adds a size alias between `i` and `l.size()` when `i` is initialized by 0 or 1.
Reviewed By: ezgicicek
Differential Revision: D18351867
fbshipit-source-id: e7d19a4ec
Summary:
This diff adds semantics of Java function calls of enum `values` inside class initializers.
* Java class initializer function initializes a specific field `$VALUES`, which points to the list
of enum values.
* The `values` function of enum class returns the value of `$VALUES`.
The problem is when the `values` function is called inside the class initializer, for example:
```
enum Color {
RED,
GREEN,
BLUE;
static {
for (Color c : Color.values()) {}
}
}
```
This introduces a recursive dependency: the class initializer calls `Color.values` and the function
returns `Color.$VALUES` the value of which should be initialized in the class initializer.
To address the problem, this diff finds the value of `$VALUES` in its abstract memory when
`values` is called inside the class initializer.
Reviewed By: ezgicicek
Differential Revision: D18349281
fbshipit-source-id: 21766c20f
Summary:
The order was wrong: the map from procnames to node-ids was cleaned first, but to clean the map from node-ids to nodes, we need the id and we have already removed it.
The symptom was that effectively no new leaves are created by "removing" a node, so the call graph scheduler quickly devolves to the file-based one.
Reviewed By: skcho
Differential Revision: D18448209
fbshipit-source-id: f272a8112
Summary:
There was some over-general treatment of reachability, in anticipation of changes that didn't happen.
In particular, we only need to flag/remove single nodes, as they must be leaves to be scheduled,
therefore we never need to traverse their successors, because there aren't any.
Reviewed By: jvillard
Differential Revision: D18425905
fbshipit-source-id: b86490542
Summary:
- Convert `task_generator` into a module of `ProcessPool` and collect inside the two combinators which were in semi-random places.
- Make `SyntacticCallGraph` export a `task_generator` as opposed to a call-graph builder.
- Separate `target` type and put it in its own module to avoid dependency cycles.
Reviewed By: skcho
Differential Revision: D18425718
fbshipit-source-id: 7957edac8
Summary:
`typecheck_instr` is a function that essentially does most of nullsafe typechecking
work: it pattern matches the instruction and handles most of business logic (e.g. knowledge about builtins, rules of PropagatesNullable, flow-sensitive rule for condition branches etc etc etc.
This is a gigantic function consisting of huge amount of nested
function. No way it can fit in someone's head and it is super hard to
read. It also captures many things like node and node'.
This diff does fairly shallow work:
1. Moves most of nested subfunctions into top-level functions. It also
means that what was previously hiddenly captured is now made an explicit
dependency.
2. Some (minority) of them are renamed to better indicate the context.
3. Some (minority) of params are renamed to clear indicate the
difference.
4. Some params are made named params, especially booleans and params
that have the same types so could be confused.
5. In some placed, added bit more clear comments.
This diff DOES NOT do:
1. Tries to fully resolve confusion between cryptic names. In couple of places, instead of node'
and node we use node and original_node, which is barely better. But we
still have ugly things like typestate and typestate1 leaving together.
Baby steps!
2. Tries to create better or consistent names in functions. I did it for
most obvious cases, that's it.
3. Order or params is arbitrary. I just used the order that was easy to
come up with, no consistency here.
Reviewed By: artempyanykh
Differential Revision: D18425965
fbshipit-source-id: 7a775f08d
Summary:
This diff extends bound domain to express Min/Max of another bounds, so it can keep some more
precision in `Math.min/max`.
limitation: `MinMaxB`, the constructor of the bound, can contain only linear expressions or
previous min/max expressions.
Reviewed By: ezgicicek
Differential Revision: D18395365
fbshipit-source-id: fc90d27fd
Summary:
We still have few remaining places which we have a logic not encoded in
as a Nullability type. Ignoring third party param calls is one of them.
We don't want this behavior for strict mode.
Reviewed By: artempyanykh
Differential Revision: D18396639
fbshipit-source-id: dbfedc769
Summary:
The upcoming whole-program analysis will need to log reports in different source files simultaneously.
Here, the data structure containing the reports, and in charge of deduplication is generalised to
a map from source file to what it was previously. This way, writing out the reports is possible even
with multiple source files.
Reviewed By: skcho
Differential Revision: D18394994
fbshipit-source-id: 5f5ecc27c
Summary:
This is a dirty hack to make nullsafe behave consistently for internal
and external models.
Medium term this code needs to be rewritten in a better way, so that we
pass all information in annotated signature (either in form of Inferred
nullability, or type origin, which tracks third party calls).
As a follow up, we will make reporting more clear.
Reviewed By: artempyanykh
Differential Revision: D18372660
fbshipit-source-id: 12c2449e1
Summary: Capture locations where work is scheduled to run in parallel (here, just Executors). Also add a test file with cases the upcoming whole-program analysis for starvation should catch.
Reviewed By: dulmarod
Differential Revision: D18346880
fbshipit-source-id: 57411b052
Summary:
Ability to accept relative path is convenient for testing and local
debugging.
Ability to accept absolute paths is needed for buck integration - buck
knows absolute path (to properly invalidate cache when the content of
the folder is changed) and passes it to infer.
Reviewed By: artempyanykh
Differential Revision: D18370407
fbshipit-source-id: be7f12ae1
Summary: Follow ups will include error messaging that makes the choice clear
Reviewed By: artempyanykh
Differential Revision: D18347664
fbshipit-source-id: b6f005726
Summary:
In this diff, we just load the info from the storage. Next diff will be
actually using this information to infer nullability.
`ThirdPartyAnnotationGlobalRepo.get_repo` will be used in the next diff,
hence #skipdeadcode
Reviewed By: artempyanykh
Differential Revision: D18347647
fbshipit-source-id: 82a9223c6
Summary:
In next diffs, we will:
1/ teach nullsafe to read nullability information from the 3rd party
annotation folder
2/ use this storage in addition to our hard-coded
models to respect nullability during type-checking
Reviewed By: artempyanykh
Differential Revision: D18247538
fbshipit-source-id: ee45bc80e
Summary:
This diff extends the alias domain, so each variable can have multiple aliases.
It changed `KeyLhs` can be mapped to multiple alias targets in the `AliasMap` domain:
```
before : KeyLhs.t -> KeyRhs.t * AliasTarget.t
after : KeyLhs.t -> KeyRhs.t -> AliasTarget.t
```
Reviewed By: ezgicicek
Differential Revision: D18062178
fbshipit-source-id: b325a6055
Summary:
It extracts RHS of alias from `AliasTarget.t`, so it changes the `AliasMap` domain:
```
before : KeyLhs.t -> AliasTarget.t // AliasTarget.t includes KeyRhs.t
after : KeyLhs.t -> KeyRhs.t * AliasTarget.t
```
Reviewed By: ezgicicek
Differential Revision: D18299537
fbshipit-source-id: 1446580a8
Summary: We only care about expensive invariant calls. Let's disable the usual one since it is not used and there is no point filling up our dbs.
Reviewed By: dulmarod
Differential Revision: D18298530
fbshipit-source-id: 7a933c8da
Summary:
More rigid format for 3rd party annotation repo
To simplify external processing by tools, lets not accept any divergence from a
format, which is:
<fully qualified class name>#<method_name>(<params>)[ Nullable]
<params> = <list of param separated by ", ">
<param> = [Nullable ]<fully qualified type>
Particularly:
- Dont accept spaces in arbitrary places
- Require a single space after each comma separating params
- Require a single space between closing parethesis and nullable
annotation, if present
- Require at least one '.' in a class name (to prevent errors when
somebody did not specify a package).
This diff also makes error messaging more user-friendly, because now it
is easy to do a minor mistake like forget a space after comma.
Reviewed By: asm89
Differential Revision: D18297382
fbshipit-source-id: 91aab6823
Summary:
This diff tries to make less imprecise division by constants results.
For example, the results of the division `[l, u] / c`, where `c` is a positive constant, are:
1. If `l/c` or `u/c` is representable in the bound domain, it uses the precise bounds, i.e., `[l/c, u/c]`.
2. If it is not representable, it tries to make conservative results:
if `0<=l<=u`, it returns `[0, u]` because `0 <= [l/c, u/c] <= u`
if `l<=u<=0`, it returns `[l, 0]` because `l <= [l/c, u/c] <= 0`
if `l<=0<=u`, it returns `[l, u]` because `l <= [l/c, u/c] <= u`
3. otherwise, it returns top, `[-oo, +oo]`
Reviewed By: ezgicicek
Differential Revision: D18270380
fbshipit-source-id: 8fb14c0e4
Summary:
Add precision to analysis by elaborating the thread-status domain. This is done by having unknown (bottom), UI, BG or Any (both/top) elements in the lattice. This way, when we branch on thread-identity (if I am on UI thread do this, otherwise do that), we know that in one branch we are on UI thread and on the other we are *not* on the UI thread (BG thread), where previously the other branch would just go to top.
With this knowledge we can throw away pairs that come from callees which run on a thread that is impossible, given the current caller thread identity. This can happen when annotations are used incorrectly, and since this is the purview of annot-reachability, we just drop those pairs entirely.
Reviewed By: skcho
Differential Revision: D18202175
fbshipit-source-id: be604054e
Summary:
Now that we have two similar functions, it becomes confusing, because `Pp.to_string` and `Pp.string_of_pp` can seem to do the same stuff, while in reality they do the opposite.
Well, it is still bit confusing, because the proper names would be
`Pp.pp_of_to_string` and `Pp.to_string_of_pp`, but I think this high
level order names are not necessary given that in most cases they will
be used as concrete functions.
I think `Pp.of_string` captures such usages better than `to_string` used to do: you need to pp stuff,
but you have a string (or, technically, a function that returns a string), so you pretty print OF that string, aren't you?
Reviewed By: jvillard
Differential Revision: D18245876
fbshipit-source-id: fd4b6ab68
Summary:
This is a helper module for reading info from a 3rd party nullability repository.
Next diffs are going to use it for reading nullability repository from
disk.
Reviewed By: artempyanykh
Differential Revision: D18225473
fbshipit-source-id: 06a2dc97e
Summary:
Steal a page from RacerD (and improve interface of) on using certain calls to assert
execution on a particular thread. Reduces FPs and FNs too.
Reviewed By: dulmarod
Differential Revision: D18199843
fbshipit-source-id: 5bdff0dfe
Summary:
The zero cost of node does not make sense especially when the abstract memory is non-bottom. This
resulted in unreasonable zero cost results sometimes, e.g. when the checker could not find
appropriate control varaibles having interval values of iteration. This diff fixes this, so sets
the minimum basic cost as 1, if the abstract memory at the node is non-bottom.
Reviewed By: ezgicicek
Differential Revision: D18199291
fbshipit-source-id: b215d10e5
Summary:
When reporting null dereference it is useful to know where the null came
from.
Reviewed By: skcho
Differential Revision: D18206459
fbshipit-source-id: 0c8e6781b
Summary:
This simplifies the code overall. It also makes accessing the action of
a "trace" (which is now stored alongside it instead of deep inside it)
constant time instead of linear in the number of nested calls.
Reviewed By: skcho
Differential Revision: D18206460
fbshipit-source-id: 9546ff36f
Summary:
This adds a more interesting value domain to pulse: concrete intervals.
There are still two main limitations:
1. arithmetic operations are all over-approximated: any assignment involving arithmetic operations is replaced by non-determinism
2. abstract values that are discovered to be equal are not merged into one
Reviewed By: skcho
Differential Revision: D18058972
fbshipit-source-id: 0492a590f
Summary:
This does several things because it was hard to split it more:
1. Split most of the arithmetic reasoning to PulseArithmetic.ml. This
doesn't need to be reviewed thoroughly because an upcoming diff
changes the domain from just `EqualTo of Const.t` to an interval domain!
2. When going through a prune node intra-procedurally, abduce arithmetic
facts to the pre (instead of just propagating them). This is the "assume
as assert" trick used by biabduction 1.0 too and allows to propagate
arithmetic constraints to callers.
3. Use 2 when applying summaries by pruning specs whose preconditions
have un-satisfiable arithmetic constraints.
This changes one of the tests! Pulse now does a bit more work to find
the false positive, as can be seen in the longer trace.
Reviewed By: skcho
Differential Revision: D18117160
fbshipit-source-id: af3b2c8c0
Summary:
Instead of checking that each address in the pre that must be valid is
not invalid in the caller (and error out if it turns out it is invalid)
as we discover them, save these checks for after we are sure that the
precondition can be applied. It is in fact a bug that we can report an
error when trying to apply a precondition that is actually not
satisfiable in the current state for other reasons than lifetime issues.
We still want to skip calls in case of weird issues like mismatch in
number of formals vs actuals.
This will have more obvious effects later when we also check that
arithmetic facts in preconditions are satisfied at the call site: if a
pre mandates "x=1" and "y must be valid" and we have "x=0" and "y
invalid" then we shouldn't report an error.
Reviewed By: skcho
Differential Revision: D18115229
fbshipit-source-id: ad4ce72ff
Summary:
If a precondition cannot be applied, it means that this program path
somehow doesn't make sense for the caller and so should be pruned. Right
now we just treat this as skipping over the call instead.
This will become more important when specs start mentioning arithmetic
facts that must be satisfied at the call site. As it is we will only
stop if we discover aliasing in the pre not present at the call site or
vice versa.
Reviewed By: dulmarod
Differential Revision: D18115230
fbshipit-source-id: 4f1c7a583
Summary: The way `<=` is used in `AbstractDomain` prevents infix use and forces bracketing it everywhere. Replace with simple `leq`.
Reviewed By: jvillard
Differential Revision: D18201854
fbshipit-source-id: 8175224e4
Summary: Abstract state tracks stuff that is not needed for summaries, wasting space/time.
Reviewed By: jvillard
Differential Revision: D18171499
fbshipit-source-id: 25483ced9
Summary:
Primitive types are not annotated. Because of that, we used to implicitly derive
`DeclaredNonnull` type for them. This worked fine, but this leads to errors in Strict mode, which does
not believe DeclaredNonnull type.
Now lets offifically teach nullsafe that primitive types are
non-nullable.
Reviewed By: jvillard
Differential Revision: D18114623
fbshipit-source-id: 227217931
Summary:
This diff adds SafeInvertedMap, which is similar to InvertedMap but it
guarantees that there is no top elements in the tree of the map.
Reviewed By: ezgicicek
Differential Revision: D18062174
fbshipit-source-id: 2fbc51f31
Summary: `Str.regexp_string` should be used to find a method name instead of `Str.regexp`.
Reviewed By: ezgicicek
Differential Revision: D18136598
fbshipit-source-id: c4b56dd64
Summary:
The reporting phase would go through the critical pairs in the summary roughly three times, once for each major type of warning (starvation, lockless violation, deadlock). This is wasteful, and also led to some code duplication. Fix.
Also, use the more efficient annotation matcher in `ConcurrencyModels` and move some model matchers to `StarvationModels`.
Reviewed By: artempyanykh
Differential Revision: D18118149
fbshipit-source-id: ff4dc3d07
Summary: It is now possible to push the thread status into each critical pair. This leads to higher precision, because when code branches on whether it is on the UI thread, the final abstract state of the procedure will be `AnyThread`, but pairs created in the UI thread branch should know that their status is `UIThread`, not `AnyThread`.
Reviewed By: jvillard
Differential Revision: D18114273
fbshipit-source-id: cbb99b46f
Summary: This will be more useful later when adding another one.
Reviewed By: ezgicicek, jberdine
Differential Revision: D18115231
fbshipit-source-id: a0a01901a
Summary:
The business of translating `Top/True/False` to `true/false` can be
hidden more.
Reviewed By: skcho
Differential Revision: D18115228
fbshipit-source-id: 071fcbddf
Summary:
Warning 33 (unused open) is enabled but the module open is not really
unused, it's just also opened at the top of the file...
Reviewed By: skcho
Differential Revision: D18114385
fbshipit-source-id: 2a8f9512a
Summary:
This diff avoids making top values on unknown non-static function,
such as abstract function, calls. This is necessary because the
generated top values ruin the precision of the cost checker.
Reviewed By: ezgicicek
Differential Revision: D17418611
fbshipit-source-id: aeb759bdd
Summary:
The wrong function was used when we tried to see if the class is
annotated with NullsafeStrict. This made it work only for non-static
methods.
Now we use the proper way.
Reviewed By: ngorogiannis
Differential Revision: D18113848
fbshipit-source-id: 02b7555be
Summary:
Previously, we considered a function which modifies its parameters to be impure even though it might not be modifying the underlying value. This resulted in FPs like the following program in Java:
```
void fresh_pure(int[] a) {
a = new int[1];
}
```
Similarly, in C++, we considered the following program as impure because it was writing to `s`:
```
Simple* reassign_pure(Simple* s) {
s = new Simple{2};
return s;
}
```
This diff fixes that issue by starting the check for address equivalnce in pre-post not directly from the addresses of the stack variables, but from the addresses pointed to by these stack variables. That means, we only consider things to be impure if the actual values pointed by the parameters change.
Reviewed By: skcho
Differential Revision: D18113846
fbshipit-source-id: 3d7c712f3
Summary: As suggested by artempyanykh, this will make it bit more clear
Reviewed By: artempyanykh
Differential Revision: D18037204
fbshipit-source-id: 65cb96815
Summary: We stop tracking at builder boundaries. Let's tract create methods as well so that trace is more informative.
Reviewed By: skcho
Differential Revision: D18038637
fbshipit-source-id: a99b6431f
Summary:
Although, we have Makefile and BUCK build def, this is a maven project
which is supposed to be released to Maven Central, so it's worth
having a short instruction on how to build it with maven.
Reviewed By: mityal
Differential Revision: D18037109
fbshipit-source-id: 6aebf4384
Summary: Adding support to matching block names. We match mangled block names. We also needed to extend the function for extracting the range for each method, to also traverse the stmts to be able to find the block declarations.
Reviewed By: skcho
Differential Revision: D17956931
fbshipit-source-id: 707908812
Summary:
We support only class level annotations for now. We will add more when
we support more.
Reviewed By: artempyanykh
Differential Revision: D18036213
fbshipit-source-id: 44791318e
Summary:
This is the first take on strict mode semantics.
The main invariant of strict mode is the following:
If the function passes `NullsafeStrict` check and its return value is
NOT annotated as Nullable, then the function does not indeed return
nulls, subject to unsoundness issues (which should either be fixed, or
should rarely happen in practice).
This invariant helps the caller in two ways:
1. Dangerous usages of non strict functions are visible, so the caller is enforced to check them (via assertions or conditions), or strictify them.
2. When the function is strict, the caller does not need to worry about
being defensive.
Biggest known issues so far:
1. Condition redundant and over-annotated warnings don't fully
respect strict mode, and this leads to stupid false positives. (There is
so much more stupid false positives in condition redundant anyway, so
not particularly a big deal for now).
2. Error reporting is not specific to mode. (E.g. we don't distinct real nullables and non-trusted non-nulls, which can be misleading). To be
improved as a follow up.
Reviewed By: artempyanykh
Differential Revision: D17978166
fbshipit-source-id: d6146ad71
Summary:
This is an intermediate nullability type powering future Strict mode.
See the next diff.
Reviewed By: artempyanykh
Differential Revision: D17977909
fbshipit-source-id: 2d5ab66d4
Summary:
Currently, we have NullsafeRules.ml responsible for detecting the
violation fact. All other logic: what should be the error type,
severity, and error message, is in TypeErr.ml.
In this diff, we move logic from NullsafeRules.ml and TypeErr.ml to
dedicated modules like AssignmentRule.ml etc.
Each such module is responsible for:
- detecting the violation fact (this is moved from NullsafeRules.ml)
- rendering the violation error (this is moved from TypeErr.ml).
This approach makes sense for two reasons:
1. The violation fact and the way we show error are logically related to
each other.
2. In future diffs, we will support more features guiding rule behavior,
such as a) decision whether to hide or show the error depending on type
information and mode; b) the way we render error depending on type
information and role.
Having dedicated modules incapsulating knowledge about rules is a natural way to support 2.
Reviewed By: artempyanykh
Differential Revision: D17977891
fbshipit-source-id: a53d916d3
Summary:
1. For each Nullsafe Rule, lets have a dedicated IssueType.
2. Split error reporting to three subfunctions: description, field type,
and infer issue.
This allows to introduce additional capabilities in a consolidated
manner. Example of such capabilities is should we hide or show an error,
what should be error severity depending on strictness mode, and how
exactly the error should be reported depending on how exactly
nullability is violated.
Reviewed By: artempyanykh
Differential Revision: D17977887
fbshipit-source-id: 860d67d2f
Summary:
This function can return `None` if the result is equal to the first
argument of join (why first?). It is unclear if it was an optimization
attempt of over-complicated logic.
Reviewed By: artempyanykh
Differential Revision: D17876561
fbshipit-source-id: 9628fb86e
Summary:
The goal of this logic is unclear:
1/ See the comments
2/ I can not see the scenario where classes and proper types can be
joined in a legit Java program
3/ Even it if was the case, I don't see how this heuristic is justified.
So I assume it is not.
Reviewed By: artempyanykh
Differential Revision: D17876568
fbshipit-source-id: c9c6cd604
Summary:
It is unclear what is the purpose of doing so, and it adds complexity to
codebase.
1/ The semantics of this is not clear, it more or less corresponds to
"where are all original locations that contributed to the type
calculation", but many branches in CFG have nothing to do with
nullability; also it was used not always consistently.
2/ The only place where this was used is logs, so this is no-ops. It is
unclear how seeing all locations can help debugging, given 3/ - see
below
3/ We have the right place to store such informatin, namely TypeOrigin,
where we store locations associated with types where we merge them in
CFG. Currently, we store only "winner" - the most relevant locations
that contributed to nullability in the most informative way. We show
this to the user when we report an error.
4/ If we want to support more things (e.g. show something more to the user), TypeOrigin
seems to be the right place. Or, alternatively, we might still merge
locations in `range`, but this will be better to organize in a tree form
instead of flat list that is not really informative and helpful. It is
all speculative though since need to support things like that seems
unclear.
Reviewed By: artempyanykh
Differential Revision: D17857198
fbshipit-source-id: 6cf6e48a2
Summary:
That module's interface was repeated twice to avoid exposing its
internals to PulseDomain itself. It's also quite long so it makes sense
to move it to its own file.
Reviewed By: ezgicicek
Differential Revision: D17977209
fbshipit-source-id: 56a2dac24
Summary:
Another poorman's library, this time about Pulse Domains. Also renames
`PulseDomain` to `PulseBaseDomain`.
Reviewed By: ezgicicek
Differential Revision: D17955287
fbshipit-source-id: 9c947cf98
Summary:
The name had rotten: it should be `AddrHistPair`. There is little value
of exposing the type of the pair `AbstractValue.t * ValueHistory.t`,
just inline its definition everywhere.
Reviewed By: ezgicicek
Differential Revision: D17955283
fbshipit-source-id: d145251e0
Summary:
See explanations in D17955104.
This renames `AbstractAddress` to `AbstractValue` since they are not
necessarily addresses.
Reviewed By: ezgicicek
Differential Revision: D17955290
fbshipit-source-id: 8bb4c61f2
Summary:
See explanations in D17955104. I put Attributes inside PulseAttribute
instead of creating a new file to avoid exposing more internals about
ranks.
Reviewed By: ezgicicek
Differential Revision: D17955284
fbshipit-source-id: a8719a58f
Summary:
Problem: PulseDomain.ml is pretty big, and contains lots of small
modules. The Infer build being a bit monolithic at the moment, it is
hard to split all these small modules off without creating some
confusion about which abstraction barries lay where. For instance, it's
fine to use `PulseDomain.ValueHistory` anywhere, but using `PulseDomain`
itself is sometimes bad when one should use `PulseAbductiveDomain`
instead.
Proposal: a poorman's library mechanism based on module aliasing. This
stack of diffs creates new Pulse* modules for all these small, safe to
use modules, together with `PulseBasicInterface.ml`, which aliases these
modules to remove the `Pulse` prefix. At the end of the stack, it will
contain:
```
module AbstractValue = PulseAbstractValue
module Attribute = PulseAttribute
module Attributes = PulseAttribute.Attributes
module CallEvent = PulseCallEvent
module Diagnostic = PulseDiagnostic
module Invalidation = PulseInvalidation
module Trace = PulseTrace
module ValueHistory = PulseValueHistory
```
This "interface" module can be opened in other pulse modules freely.
Reviewed By: ezgicicek
Differential Revision: D17955104
fbshipit-source-id: 13d3aa2b5
Summary: In preparation for improvements to the arithmetic reasoning.
Reviewed By: dulmarod
Differential Revision: D17977207
fbshipit-source-id: ee98e0772
Summary:
Domain for thread-type. The main goals are
- Track code paths that are explicitly on UI thread (via annotations, or assertions).
- Maintain UI-thread-ness through the call stack (if a callee is on UI thread then the
trace any call site must be on the UI thread too).
- If we are not on the UI thread we assume we are on a background thread.
- Traces with "UI-thread" status cannot interleave but all other combinations can.
- We do not track other annotations (eg WorkerThread or AnyThread) as they can be
erroneously applied -- other checkers should catch those errors (annotation reachability).
- Top is AnyThread, and is used as the initial state for analysis.
Interestingly, by choosing the right strategy for choosing initial state and applying callee summaries gets rid of some false negatives in the tests even though we have not introduced any path sensitivity yet.
Reviewed By: jvillard
Differential Revision: D17929390
fbshipit-source-id: d72871034
Summary: For Objective-C methods we match the mangled names (the field is name in the profiler samples).
Reviewed By: skcho
Differential Revision: D17952552
fbshipit-source-id: 308d415f6
Summary:
bigmacro_bender
There are 3 ways pulse tracks history. This is at least one too many. So
far, we have:
1. "histories": a humble list of "events" like "assigned here", "returned from call", ...
2. "interproc actions": a structured nesting of calls with a final "action", eg "f calls g calls h which does blah"
3. "traces", which combine one history with one interproc action
This diff gets rid of interproc actions and makes histories include
"nested" callee histories too. This allows pulse to track and display
how a value got assigned across function calls.
Traces are now more powerful and interleave histories and interproc
actions. This allows pulse to track how a value is fed into an action,
for instance performed in callee, which itself creates some more
(potentially now interprocedural) history before going to the next step
of the action (either another call or the action itself).
This gives much better traces, and some examples are added to showcase
this.
There are a lot of changes when applying summaries to keep track of
histories more accurately than was done before, but also a few
simplifications that give additional evidence that this is the right
concept.
Reviewed By: skcho
Differential Revision: D17908942
fbshipit-source-id: 3b62eaf78
Summary:
Java method annotations are ambiguous in that there is no difference between
annotating the return value of a method, and annotating the method itself.
The disambiguation is done entirely based on the meaning of the annotation.
Here, while `UiThread`/`MainThread` are genuine method/class annotations
and not return annotations, the reverse is true for `ForUiThread`/`ForNonUiThread`.
This means that these latter annotations do not determine the thread status of
the method they are attached to.
Here we fix that misunderstanding.
Reviewed By: jvillard
Differential Revision: D17960994
fbshipit-source-id: 5aecfb124
Summary: As per title. These test pass already because the previous thread domain was sufficient to express them. This won't necessarily be true when the whole-program analysis version comes around, because we may decide to not report on the `Threaded` elements (see domain).
Reviewed By: dulmarod
Differential Revision: D17930653
fbshipit-source-id: 2174f6b22
Summary:
- Adds ATD file to parse the clang profiler samples
- Procnames don't help us here because we want to use mangled names, not the version of names that Infer needs, so passing in the RangeMap also ClangProc that just include the names and mangled names.
- First matching of c functions to have something in place to add a test, matching further method kinds to be done in next diff.
Reviewed By: skcho
Differential Revision: D17877071
fbshipit-source-id: b31d651a7
Summary:
I dunno, seemed wrong before. About to introduce another attribute with
similar arguments so making them consistent in advance.
Reviewed By: skcho
Differential Revision: D17930349
fbshipit-source-id: 944b58bac
Summary:
- add the variable being declared so we can report it back in the trace in addition to its location
- distinguish between local vars and formals
Reviewed By: skcho
Differential Revision: D17930348
fbshipit-source-id: a5b863e64
Summary:
- Putting test determinator in own directory
- Putting Java procname creation stuff in its own module
Reviewed By: skcho
Differential Revision: D17929885
fbshipit-source-id: 4f2578566
Summary:
Eventually thread status will be stored inside every critical pair so as to allow path sensitivity. That means that the status can no longer be a whole trace, as this will quickly become intractable, because each domain element would have to maintain its own trace as well as its own thread-status trace.
This is not great, as we lose information here, but I don't see any other way around it that is not super complicated/costly (sharing will be limited when moving from callee to caller).
Other diffs up the stack will clean up infrastructure no longer used meaningfully (ie models and domains).
Reviewed By: mityal
Differential Revision: D17908908
fbshipit-source-id: 3bf353e33
Summary:
Starvation is currently path insensitive. Two special cases of sensitivity cover a large range of useful cases:
- sensitivity on whether the current thread is a UI/background thread;
- sensitivity on whether a lock can be acquired (without blocking) or not.
We add a few tests capturing some of the false positives and negatives of the current analysis.
Reviewed By: mityal
Differential Revision: D17907492
fbshipit-source-id: fbce896ac
Summary:
This diff adopts an array length evaluation function that is conservative. It is useful when our
domain cannot express length result precisely.
For example, suppose there is an array pointer `arr_locs` that may point to two arrays `a` and `b`,
and their lengths are `a.length` and `b.length` (symbols), respectively. Using the usual
evaluation, our current domain cannot express `a.length join b.length` (join of two symbolic
values), so it returns top.
In this case, we can use the conservative function intead. It evaluates the length as `[0,
a.length.ub + b.length.ub]`, since we know every array length is positive. The result is not
precise, but better than top.
Reviewed By: ezgicicek
Differential Revision: D17908859
fbshipit-source-id: 7c0b1591b
Summary:
This will avoid printing stuff like
"0$?%__sil_tmpSIL_materialize_temp__n$2 declared" to the poor
unsuspecting user. The non-verbose stuff is used only by pulse so far as
far I can tell so hopefully this doesn't break anything.
Reviewed By: ezgicicek
Differential Revision: D17908943
fbshipit-source-id: 8ef4f1a8f
Summary:
Instead of a string argument named `~str` pass `Formal | Global` and let
`add_to_errlog` figure out how to print it.
Reviewed By: ezgicicek
Differential Revision: D17907657
fbshipit-source-id: ed09aab72
Summary:
When we make the decision to go into a branch "v = N" where some
abstract value is compared to a constant, remember the corresponding
equality. This allows to prune simple infeasible paths
intra-procedurally.
Further work is needed to make this useful interprocedurally, for
instance either or both of these ideas could be explored:
- abduce v=N in the precondition and do not apply summaries when the
equalities in the pre are not satisfied
- prune post-conditions that lead to unsat states where a value has to
be equal to several different constants
Reviewed By: skcho
Differential Revision: D17906166
fbshipit-source-id: 5cc84abc2
Summary:
When we know "x = 3" and we have a condition "x != 3" we know we can
prune the corresponding path.
Reviewed By: skcho
Differential Revision: D17665472
fbshipit-source-id: 988958ea6
Summary:
First step in having a value domain: record concrete values. We record
them as equalities to abstract values using a new attribute `Constant`.
In a way, attributes are already our "pure" part in the "formulas" that
are pulse abstract domains, so this is reminiscent of existing
separation logic implementations. Trying to add values directly in the
"heap" part proved very cumbersome whereas this approach is very simple,
allowing us to ignore values most of the time except when we actually
care.
Reviewed By: skcho
Differential Revision: D17665473
fbshipit-source-id: b8033ad9c
Summary:
It's annoying to see `sexp_list` everywhere instead of `list`, eg in
merlin.
See also D17907938.
Reviewed By: ngorogiannis
Differential Revision: D17927994
fbshipit-source-id: 84599e8bc
Summary:
Let's add basic Java support to impurity checker. Since impurity checker relies on pulse, we need to add Java with Pulse callback as well. Pulse doesn't officially support Java yet, but we can enable it for impurity checker for now.
Many Java primitives/operations are not yet modeled (such as creation of new objects, support for collections etc.). Still, it is good to run impurity checker on the existing tests of the purity checker. Also, it is nice to see that we can identify most of the impure functions correctly in the purity dir. There are a lot of FNs though.
Reviewed By: skcho
Differential Revision: D17906237
fbshipit-source-id: 15308d285
Summary:
By some unfortunate logic, OCaml often decides to use
`sexp_list`/`sexp_option` instead of just `list`/`option`. Sometimes
these get copy/pasted in interface files.
It would be good to tell OCaml not to do that in the first place but in
the meantime: this diff.
Reviewed By: ngorogiannis
Differential Revision: D17907938
fbshipit-source-id: 7546834a2
Summary:
This diff introduces inequality for the iterator alias target, as we
did for the size target before.
Reviewed By: ezgicicek
Differential Revision: D17879208
fbshipit-source-id: cc2f6a723
Summary: If we have no pulse summary (most likely caused by pulse finding a legit issue with the code), let's consider the function as impure.
Reviewed By: jvillard
Differential Revision: D17906016
fbshipit-source-id: 671d3e0ba
Summary:
Describe what the --report-*-* options actually do instead of their
outdated documentation from the time where this was
`--checkers-blacklist-regex`, `--infer-blacklist-regex` and the like.
Reviewed By: dulmarod, mityal
Differential Revision: D17906015
fbshipit-source-id: 204349e9e
Summary:
This diff revises the semantics of hasNext model to add the lengths of
arrays, rather than join them to top.
Reviewed By: ezgicicek
Differential Revision: D17882388
fbshipit-source-id: f5edaedb3
Summary: Not used feature and with no obvious roadmap anymore.
Reviewed By: jberdine, jvillard
Differential Revision: D17855860
fbshipit-source-id: fd75b9d62
Summary: This makes more explicit what we are talking about here. Also, in extending test determinator to clang, the name is incorrect, but the set is generic procnames which is fine to use for clang, just the name is wrong.
Reviewed By: ngorogiannis
Differential Revision: D17855338
fbshipit-source-id: e93bae083
Summary: This diff models the cost of `ImmutableSet.chooseTableSize(setSize)` as `O(log setSize)` and `construct(n, ...)` as `O(n)`.
Reviewed By: ezgicicek
Differential Revision: D17829850
fbshipit-source-id: 0ee318cc3
Summary:
This diff fixes a data race in ProcessPool: out channel flush was
outside of the critical section.
Reviewed By: ezgicicek
Differential Revision: D17853991
fbshipit-source-id: ac0fd2a69
Summary:
[androidx.collection.SimpleArrayMap](https://developer.android.com/reference/androidx/collection/SimpleArrayMap.html) also has `keySet` and `entrySet` methods which make them eligible for inefficient keyset checker. Let's add it.
Title
Reviewed By: skcho
Differential Revision: D17831594
fbshipit-source-id: 32e831e18
Summary:
Starvation analysis keeps a trace documenting why a method is seen as on the UI thread (many reasons possible, often confusing). This was a call-stack plus string, for keeping the explanation of why the last callee is on the UI thread. This is bad, because it takes too much memory/storage (each string is custom-made to the classes/method involved), and is effectively untyped.
Switch to a proper type for explaining this, so the cost is just a few pointers plus shared procnames/types, and then convert to string only when reporting. This will also allow to push the UI trace inside each element of the starvation domain, so as to allow path sensitivity etc, without blowing up summary size.
Reviewed By: ezgicicek, artempyanykh
Differential Revision: D17810007
fbshipit-source-id: cdd743975
Summary:
This diff proceeds work for consolidating nullsafe logic and making it
type-agnostic
Reviewed By: artempyanykh
Differential Revision: D17808485
fbshipit-source-id: 85356c625
Summary:
The current usage has several issues reducing code maintainability and
readability:
1. Null_field_access was misleading: it was used for checking accesing
to arrays as well!
2. But actually, when checking access to array via `length`, we sometimes
pretended it is a field access (hence very tricky code in rendering the
error).
3. "Call receiver consistency" is unclear name, was not obvious that it is all about
calling a method in an object.
Let's also consolidate code.
Reviewed By: artempyanykh
Differential Revision: D17789618
fbshipit-source-id: 9b0f58c9c
Summary:
This proceeds work on abstracting out operations requiring raw
nullability operations from infer core code. This will simplify coming
introducing of intermediate nullability levels
Reviewed By: artempyanykh
Differential Revision: D17789612
fbshipit-source-id: 9a2bea2ed
Summary:
In previous refactoring stages, we operated on AnnotatedNullability
(nullability of a field or method signature together with its origin),
and InferredNullability (nullability of a value in typestate together
with its origin).
Now it is time to extract common Nullability as a type system concept,
together with `<:` and `join` functionality. This was sketched in
`NullsafeRules`, so this diff consolidates this as well.
In follow up diffs, we will reduce/get rid of direct usages of things like
`InferredNullability.is_nullable`. This will simplify introducing
intermediate Nullability types.
Reviewed By: artempyanykh
Differential Revision: D17789599
fbshipit-source-id: f1b9d2dd0
Summary: StarvationModels depended on StarvationDomain which is the wrong way around, and forbids using *Models from *Domain.
Reviewed By: mityal
Differential Revision: D17809431
fbshipit-source-id: 5aa369e7c
Summary: The type hierarchy was traversed multiple times when searching for annotations: once for methods/overrides annotated and once for superclasses. This can be done in one pass.
Reviewed By: dulmarod
Differential Revision: D17787172
fbshipit-source-id: 248dd4c27
Summary: Before, we didn't track litho framework callees on client code which was wrong. Now, we replace this with the following: If the callee is `build()` itself or doesn't contain a `build()` in its summary, then we want to track it in the domain. The former makes sense since we always want to track `build()` methods. The latter also makes sense since such a method could be a setter for a prop (as in the case of `prop1` in `buildPropLithoOK` which we were missing before due to the imprecise heuristic that prevented picking up callees in litho).
Reviewed By: ngorogiannis
Differential Revision: D17810704
fbshipit-source-id: 87d88e921
Summary: As a heuristic, litho library calls on non-litho callers are not tracked. This is very imprecise and results in FPs and FNs as exemplified by newly added tests. Instead, we should check to see if the summary contains a `build()` method as will be done in the next diff. This diff adds these tests and refactors the test code.
Reviewed By: skcho
Differential Revision: D17809536
fbshipit-source-id: 6dff1868c
Summary:
Improve the trace by incorporating the callees and their locations in the call chain (i.e. chain of methods starting from `build()` call)
- extend the domain to contain the callee location
- replace the test results with the new traces
This makes our job much easier to debug FPs in a big codebase.
Reviewed By: skcho
Differential Revision: D17788996
fbshipit-source-id: 31938b5fe
Summary: `litho` checker contained two checkers: required-props and graphQL field accesses. Although they use the same domain, their reporting conditions and analysis details are different. However, they were bundled into the same analysis by adding disjunctions to `exec_instr` to handle both cases. Let's separate them into two different checkers, keeping a modular transfer function and analyzer that is reused by these two checkers.
Reviewed By: skcho
Differential Revision: D17788834
fbshipit-source-id: 47d77063b
Summary: The regexp would match `ge` and is also unnecessary and was compiled on every call. Save some cpu cycles while fixing it.
Reviewed By: jvillard
Differential Revision: D17789586
fbshipit-source-id: a3f6612c6
Summary:
At some point it was thought that we can assume that any annotation starting with "On" means the method is on the UI thread.
That's too imprecise and has led to false positives and negatives. Restrict to a well-known safe set.
Reviewed By: ezgicicek
Differential Revision: D17769376
fbshipit-source-id: 0f8fee059
Summary:
Currently, lock state is a map from locks to stacks of lock acquisitions.
Since we now have the separate acquisitions component, we no longer need to
remember the stack of acquisitions for a lock. Instead we only need a lock count,
thus reducing the memory footprint.
At the same time, change acquire and release so that they make one tree operation per
component (map/acquisition) as opposed to two (search/update) operations.
Reviewed By: ezgicicek
Differential Revision: D17736727
fbshipit-source-id: 7579eb61e
Summary:
If we acquire n nested locks we end up with n critical pairs, and for each pair the held-locks component goes up linearly, thus total space/time is O(n^2).
If the sets of held-locks are constructed with maximal sharing (intuitively, if they derive from the same set by additions) then the total space/time is O(n logn).
To do this, we must avoid constructing a new set every time we ask what the currently held locks are. Here we maintain (care is needed in the presence of recursive locks) that set across lock acquisitons and removals.
Reviewed By: skcho
Differential Revision: D17736252
fbshipit-source-id: 0f9b292c4
Summary:
This diff tries to narrowing the fixpoint of outermost loops, so that over-approximated widened values do not flow to the following code.
Problem: There are two phases for finding a fixpoint, widening and narrowing. First, it finds a fixpoint with widening, in function level. After that, it finds a fixpoint with narrowing. A problem is that sometimes an overly-approximated, imprecise, values by widening are flowed to the following loops. They are hard to narrow in the narrowing phase because there is a cycle preventing it.
To mitigate the problem, it tries to do narrowing, in loop level, right after it found a fixpoint of a loop. Thus, it narrows before the widened values are flowed to the following loops. In order to guarantee the termination of the analysis, this eager narrowing is applied only to the outermost loops.
Reviewed By: ezgicicek
Differential Revision: D17740265
fbshipit-source-id: e2d454036
Summary:
This diff extends the alias domain to analyze loop with list comprehensions form in Java precisely.
```
list2 = new List();
for (Element e : list1) {
list2.add(e);
}
```
1. `IteratorOffset` is a relation between a iterator offset and a length of another array. For example, in the above example, after n-times of iterations, the offset of the iterator (if it exists) and the length of `list2` are the same as `n`.
2. `IteratorHasNext` is a relation between iterator and its `hasNext` result.
3. At the conditional nodes, it prunes the alias list length of `list2` by that of `list1`.
* if `hasNext(list1's iterator)` is true, `list2`'s length is pruned by `< list1's length`
* if `hasNext(list1's iterator)` is false, `list2`'s length is pruned by `= list1's length`
Reviewed By: ezgicicek
Differential Revision: D17667128
fbshipit-source-id: 41fb23a45
Summary: This diff fixes a potential race in writing to pipe channel.
Reviewed By: ngorogiannis
Differential Revision: D17710123
fbshipit-source-id: 477492750
Summary:
The old domain keeps two sets:
- `events` are things (including lock acquisitions) which eventually happen during the execution of a procedure.
- `order` are pairs of `(lock, event)` such that there is a trace through the procedure which at some point acquires `lock` and before releasing it performs `event`.
A deadlock would be reported if for two procedures, `(lock1,lock2)` is in `order` of procedure 1 and `(lock2,lock1)` is in `order` of procedure 2. This condition/domain allowed for the false positive fixed in the tests, as well as was unwieldy, because it required translating between the two sets.
The new domain has only one set of "critical pairs" `(locks, event)` such that there is a trace where `event` occurs, and *right before it occurs* the locks held are exactly `locks` (no over/under approximation). This allows keeping all information in one set, simplifies the procedure call handling and eliminates the known false positive.
Reviewed By: mityal
Differential Revision: D17686944
fbshipit-source-id: 3c68bb957
Summary: Holding a master lock and then acquiring two other locks inside can generate a false positive as shown.
Reviewed By: mityal
Differential Revision: D17710076
fbshipit-source-id: 5bc910ba2
Summary:
Previously deduplication was always on which is not great for testing.
Also split tests so that we can still test deduplication separately.
Reviewed By: mityal
Differential Revision: D17686877
fbshipit-source-id: 280d91473
Summary:
The documentation and uses of filtering disagree. One typical usage is deduplication.
Split that where obvious, add comments where not obvious, and leave alone when obviously unrelated to deduplication.
Reviewed By: mityal
Differential Revision: D17715329
fbshipit-source-id: ec757927b
Summary:
Ideally the analyser should equate locks `this.x.f` and `a.x.f` in different methods if they can alias.
The heuristic removed here was rarely used and is in the way of a re-write of the analysis.
It was also badly implemented, as this should ideally be the comparison relation of `Lock`.
Reviewed By: mityal
Differential Revision: D17602827
fbshipit-source-id: 4f4576c1a
Summary:
This diff generates a symbolic value when a function returns only
exceptions. Previously, the exception expression is evaluated to top,
thus it was propagated to other functions, which made those costs as
top. For preventing that situation, this diff changed:
* exception expressions are evaluated to bottom, and
* if callee's return value is bottom, it generates a symbolic value
for it.
Reviewed By: ezgicicek
Differential Revision: D17500386
fbshipit-source-id: 0fdcc710d
Summary: This diff introduces an inequality for the size alias targets, in order to get preciser array lengths after loops. The alias domain in inferbo was able to express strict equality between alias source and its targets, e.g. x=size(array). Now, for the size alias target, it can express less than or equal relations, e.g. x>=size(array).
Reviewed By: ezgicicek
Differential Revision: D17606222
fbshipit-source-id: 2557d3bd0
Summary: Component.Builder has its own non-required props that are inherited by the MyComponent.Builder. Add tests where these common props are set in the chain of calls.
Reviewed By: Katalune
Differential Revision: D17710294
fbshipit-source-id: f3c5ef28c
Summary:
This reverts commit 9d5c322202a479e73b60f00ffb318f1c7948e407.
INFERVERSION forcing a version check proved to be problematic for
integrations, thus is reverted.
Reviewed By: ngorogiannis
Differential Revision: D17627638
fbshipit-source-id: f988207aa
Summary:
This diff is to refactoring some stuffs for the following diff.
* revised pretty print of the alias domain
* moved `eval_array_locs_length` to `BufferOverrunSemantics`.
Reviewed By: jvillard
Differential Revision: D17667123
fbshipit-source-id: c95611df5
Summary:
Sawja and Javalib have recently released new versions that drop off
the camlp4 dependency. This is a minimal diff in order to update infer
opam depedencies.
Last (1.5.7) generates invokedynamic, but work on InvokeDynamic is still
in progress in Infer and not activated here yet. In this version, the
Java frontend will still replace any InvokeDynamic by a dummy
InvokeStatic call (as introduced by Jeremy a long time ago).
Reviewed By: jvillard
Differential Revision: D17662979
fbshipit-source-id: f686ba442
Summary:
Unfortunately it is very hard to predict when
`Typ.Procname.describe` will add `()` after the function name, so we
cannot make sure it is always there.
Right now we report clowny stuff like "error while calling `foo()()`",
which this change fixes.
Reviewed By: ezgicicek
Differential Revision: D17665470
fbshipit-source-id: ef290d9c0
Summary:
Having just numbers for abstract values is a tad confusing. The change
is also needed for having actual constant values later.
Reviewed By: ezgicicek
Differential Revision: D17665469
fbshipit-source-id: 20dff7bbe
Summary: `Prop(varArg = myProp) List <?> myPropList` can also be set via `myPropList()` or `myProp()`. Add support for picking up the `varArg` and checking this form of required props.
Reviewed By: ngorogiannis
Differential Revision: D17571997
fbshipit-source-id: 7956cb972
Summary:
Turns out `Memory.add_attributes` was only used to add singletons so
deleted that in the process.
Reviewed By: skcho
Differential Revision: D17627725
fbshipit-source-id: 0abe3889d
Summary:
This was bogus: when evaluating `e[e']` we were checking that `e'` is a
valid pointer.
Reviewed By: ezgicicek
Differential Revision: D17627727
fbshipit-source-id: 536384e95
Nikos Gorogiannis
Sungkeun Cho
Artem Pianykh
Ezgi Çiçek
Jules Villard
David Pichardie
Radu Grigore
Mitya Lyubarskiy
Martin Trojer
Artem Pyanykh
Dulma Churchill
Josh Berdine