Summary:
Naming a variable `_foo` makes the compiler not warn about them if they are
unused, but there are lots of instances of such variables in the code where
they are in fact used, defeating the warning and introducing confusion for
those used to this naming convention.
Basically `sed -i -e "s/ _\([a-zA-Z][a-zA-Z0-9_']*\)/ \1_/g" **/*.ml` followed
by manual fixing of compilation errors (lots of `compare__foo` ->
`compare_foo_`).
Reviewed By: mbouaziz
Differential Revision: D6358837
fbshipit-source-id: 7ffb4ac
Summary: This information is already available in the procedure name.
Reviewed By: jeremydubreil, jvillard
Differential Revision: D6119459
fbshipit-source-id: f07bfde
Summary:
`infer capture -a checkers ...` would accidentally trigger the analysis phase.
This crashes the Buck flavors integration when used with `--reactive` because
.start never gets created in the infer-out-* subfolders of buck-out.
Reviewed By: dulmarod
Differential Revision: D6336072
fbshipit-source-id: af0ab5e
Summary:
We need to use the procedure description of the callees for lazy dynamic dispatch and for the resolution of the lambda. We may also need this information in other analyses, e.g. for RacerD. This diff makes the procedure description of the callees as part of the summary.
The procedure description has been part of the summary for a while already without noticeable decrease in performance.
Reviewed By: mbouaziz
Differential Revision: D6322038
fbshipit-source-id: 84101cb
Summary:
Change ocamlformat installation procedure to use opam instead of
pinning.
Reformat all code with v0.2, which has a few improvements.
Reviewed By: jvillard
Differential Revision: D6292057
fbshipit-source-id: 759967f
Summary:
This diff adds a new way of executing blocks when they are passed as parameters to a method. So far we just skipped the block in this case.
Now we can execute it. Let's demonstrate with an example. Say we have
//foo has a block parameter that it executes in its body
foo (Block block) { block();}
// bar calls foo with a concrete block
bar() {
foo (^(){
self->x = 10;
});
};
Now, when we call the method foo with a concrete block, we create a copy of foo instantiated with the concrete block, which in itself is translated as a method with a made-up name.
The copy of foo will get a name that is foo extended with the name of the block parameter, the call to the block parameter will be replaced to a call to the concrete block, and the captured variables
of the concrete block (self in this case), will be added to the formals of the specialized method foo_block_name.
This is turned on at the moment for ObjC methods with ObjC blocks as parameters, and called with concrete blocks. Later on we can extend it to other types of methods, and to C++ lambdas, that are handled similarly to blocks.
Another extension is to check when the block has been called with nil instead of an actual block, and raise an error in that case.
After this diff, we can also model various methods and functions from the standard library that take blocks as parameters, and remove frontend hacks to deal with that.
Reviewed By: ddino
Differential Revision: D6260792
fbshipit-source-id: 0b6f22e
Summary:
This confuses the SIOF checker and causes false positives. This dummy deref is
generated for constructors of classes that are modeled as being pointer types
instead of the actual class in infer, typically for smart pointers. I do not
understand how this works.
The biabduction also analyses this code, so might now get confused itself.
Reviewed By: jberdine
Differential Revision: D6221817
fbshipit-source-id: 050c5a9
Summary: The Java bytecode does not contain information about the location of abstract of interface methods. Before this diff, the analysis trace was tuncated and the file where the abstract or interface method was not included in the trace, which makes it harder to understand the Infer report, especially when the method is on a generated file that is not checked in the repository.
Reviewed By: sblackshear
Differential Revision: D6223612
fbshipit-source-id: c80c6f2
Summary:
This diff takes the first step toward a more general filtering
system. This step is concerned only with filtering at the reporting
stage, filtering for the capture and analysis stages is left for
later.
This diff adds a new command line / config option
```
--filter-report +string
Specify a filter for issues to report. If multiple filters are
specified, they are applied in the order in which they are
specified. Each filter is applied to each issue detected, and only
issues which are accepted by all filters are reported. Each filter
is of the form:
`<issue_type_regex>:<filename_regex>:<reason_string>`. The first
two components are OCaml Str regular expressions, with an optional
`!` character prefix. If a regex has a `!` prefix, the polarity is
inverted, and the filter becomes a "blacklist" instead of a
"whitelist". Each filter is interpreted as an implication: an issue
matches if it does not match the `issue_type_regex` or if it does
match the `filename_regex`. The filenames that are tested by the
regex are relative to the `--project-root` directory. The
`<reason_string>` is a non-empty string used to explain why the
issue was filtered.
See also infer-report(1) and infer-run(1).
```
Reviewed By: jvillard
Differential Revision: D6182486
fbshipit-source-id: 9d3922b
Summary: This check is deprecated and will be replaced by a dedicated checker to detect unitialized values.
Reviewed By: mbouaziz
Differential Revision: D6133108
fbshipit-source-id: 1c0e9ac
Summary:
Install ocamlformat from github as part of `make devsetup`, and use it
for formatting OCaml (and jbuild) code.
Reviewed By: jvillard
Differential Revision: D6092464
fbshipit-source-id: 4ba0845
Summary:
Refactor `RegisterCheckers` to give a record type to checkers instead of a tuple type.
Print active checkers with their per-language information.
Improve the manual entries slightly.
Reviewed By: sblackshear
Differential Revision: D6051167
fbshipit-source-id: 90bcb61
Summary:
This will allow most of the checkers, except the bi-abduction, to skip the analysis on the specialized clone of the methods used to handle dynamic dispatch. Doing this, we can run the bi-abduction analysis using:
infer -a checkers --biabduction
without risk of conflicts on the resolution of dynamic dispatch.
Reviewed By: sblackshear
Differential Revision: D6052347
fbshipit-source-id: 0c75bf3
Summary:
1. Mark some Makefile targets as depending on `MAKEFILE_LIST` so they get rebuilt on Makefile changes
2. Do not show boolean options with no documentation in the man pages (like we do for other option types).
3. Default to Lazy dynamic dispatch for the checkers.
4. In the tests, use `--<checker>-only` instead of relying on `--no-default-checkers`
5. `--no-filtering` is redundant if `--debug-exceptions` is passed
Reviewed By: jeremydubreil
Differential Revision: D6030578
fbshipit-source-id: 3320f0a
Summary:
Another step toward running the biabduction analysis as a checker.
Depends on D6038210
Reviewed By: jvillard
Differential Revision: D6038682
fbshipit-source-id: fed45bf
Summary:
The previous version of the code was trying to lookup from disk the procedure description of the procedure to analyze, which was in fact already loaded in memory.
This diff fixes one of the issues preventing the bi-abduction to run as a checker when using the lazy dynamic dispatch algorithm.
Reviewed By: sblackshear
Differential Revision: D6038210
fbshipit-source-id: 10a98ee
Summary:
`pp_instr_list` was not tailrec causing a stack overflow on big code.
Also simplified a few things
Reviewed By: jvillard
Differential Revision: D5995451
fbshipit-source-id: 40a4911
Summary:
The biabduction backend can raise exceptions that will be caught when triggered
from within the biabduction backend itself (eg, `analyze_procedure` called from
Symexec as a result of an ondemand analysis, because Symexec will catch these),
but not caught when called as the result of an ondemand analysis emanating from
another analyzer (eg ThreadSafety).
Make the biabduction more self-contained by wrapping the analysis of a
procedure inside a `try/with` with similar properties as the one of Symexec.
Reviewed By: jeremydubreil
Differential Revision: D5986335
fbshipit-source-id: 36a5d32
Summary:
Running `infer report foo.specs` would overwrite report.json with an empty json.
Only recompute report.json when running `infer-analyze` or `infer-run`.
Reviewed By: mbouaziz
Differential Revision: D5963500
fbshipit-source-id: e579c6f
Summary:
Use a monotonic time source instead.
Also, sleep between retries in the Serialization code.
Reviewed By: jberdine
Differential Revision: D5941697
fbshipit-source-id: 05efbe1
Summary: Not sure if useful but seems sensible. It disappears at the top of the stack when we do merging in SQL.
Reviewed By: mbouaziz
Differential Revision: D5824131
fbshipit-source-id: fd64752
Summary:
Use an SQLite database to store proc attributes, instead of files on disk.
Wrap SQLite operations in two layers:
1. `SqliteUtils` provides helper functions to make sure DB operations succeed
2. `KeyValue` provides a functor to expose a simple and type-safe key/value store backed by the SQLite DB.
Reviewed By: jberdine
Differential Revision: D5640053
fbshipit-source-id: 31050e5
Summary:
This diff does two things:
# Infer no longer add the contrains that the return value of a skip function is never null. This was leading to false negatives and is not necessary as those return value are treated angelically
# Infer now support `Nonnull` on the return value of skip functions.
Reviewed By: jberdine, sblackshear
Differential Revision: D5840324
fbshipit-source-id: bbd8d82
Summary:
`reraise` was error-prone when one forgot to save the backtrace between where the exception is caught and where it is reraised.
If any exception was raised (even caught) in between, the printed backtrace would be the one of the last exception thrown and it would be very confusing.
This diff kills `reraise` and introduces `reraise_after exn ~f` and `reraise_if exn ~f` to be used right after catching the exception.
Also turned some of them to the common pattern `try_finally ~f ~finally`.
Reviewed By: jvillard
Differential Revision: D5911244
fbshipit-source-id: 9883d1e
Summary:
The only language types we have are Java/Clang/Python. The unit of analysis is a source file, and you can't write a source file that mixes two or more of these languages (to the best of my knowledge).
This diff simplifies using the assumption that all procedures in a file are written in the same language.
Reviewed By: jeremydubreil
Differential Revision: D5886942
fbshipit-source-id: 88c3759
Summary:
The only language types we have are Java/Clang/Python. The unit of analysis is a source file, and you can't write a source file that mixes two or more of these languages (to the best of my knowledge).
This diff simplifies using the assumption that all procedures in a file are written in the same language.
Reviewed By: jeremydubreil
Differential Revision: D5886942
fbshipit-source-id: 8555a16
Summary: Only Eradicate uses this, no need to create it for every checker.
Reviewed By: jeremydubreil
Differential Revision: D5886775
fbshipit-source-id: 7242437
Summary:
A Java cluster checker currently defines a "cluster" as all of the procedures in the same class.
But the cluster checker actually knows about all the procedures defined in the same source file.
In some checkers (such as thread-safety), we want to aggregate results across classes in the same file, not just methods in the same class.
This refactoring leaves the behavior the same for now, but will make it easier to do this in the near future.
Reviewed By: jeremydubreil
Differential Revision: D5885896
fbshipit-source-id: 0815fca
Summary:
Calling functions that raise exceptions (even if they get caught) may smudge
the backtraces we get from OCaml. We need to record the original backtrace
*before* calling such fuctions on the path between catching an exception and
reraising it.
Also change the heptuple returned by `Exceptions.recognize_exception` into a
record type, and make that function not raise when classifying exceptions.
Reviewed By: jberdine
Differential Revision: D5882934
fbshipit-source-id: 8e99fe8
Summary: The point of the tracing mode is to compute all the possible path leading to an error state. However, within a method, many of those paths are not feasibile in practice. This leads to many false alarms for the resource leak analysis.
Reviewed By: sblackshear
Differential Revision: D5888695
fbshipit-source-id: 2dbc57b
Summary:
Since D5381239, infer is careful not to delete directories that do not "look
like" results directories on startup, in case the user passed, eg, `-o /`.
In our repo, lots of results dir are created by build/test of infer, and when
the version of infer changes and the expected contents of results directories
change then it might start refusing to delete the results directories created
with another version of infer.
Add an option to force infer to delete the results directory no matter how
dodgy it looks, and use it in our repo by adding the option in every
.inferconfig.
Reviewed By: mbouaziz
Differential Revision: D5870984
fbshipit-source-id: 09412de
Summary:
This can be a long-running step and it's useful to know how long it took. We
already dump some statistics on stderr after merging is done, this just adds
one more line.
Reviewed By: mbouaziz
Differential Revision: D5833580
fbshipit-source-id: 70e19ab
Summary:
Simple instance of the problem: analyzing the following program times out.
```
#include <tuple>
void foo() {
std::tuple<std::tuple<int>> x;
}
```
Replacing `std::tuple<std::tuple<int>>` by `std::tuple<int>` makes the analysis
terminate.
In the AST, both tuple<tuple<int>> and tuple<int> have the same template
specialization type: "Pack" (which means we're supposed to go look into the
arguments of the template to get their values). This is not information enough
and that's the plugin fault.
On the backend side, this means that two types have the same Typ.Name.t, namely
"std::tuple<_>", so they collide in the tenv. The definition of
tuple<tuple<int>> is the one making it into the tenv. One of the fields of the
corresponding CxxRecord is of type "tuple<int>", which we see as the same
"tuple<_>", which causes the loop.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D5775840
fbshipit-source-id: 0528604
Summary:
Sort the complete set of warnings by everything except procname, then de-duplicate.
This scheme prevents reporting identical error messages on the same line/same file.
This is important for avoiding duplicate reports on multiple instantiations of the same template.
Reviewed By: jberdine
Differential Revision: D5819467
fbshipit-source-id: 984f47f
Summary: The resolution was previously only happening for constructors, but calls to private methods or to `super` are also neither static calls nor virtual calls. In this case, the resolution logic should be the same as for constructors.
Reviewed By: sblackshear
Differential Revision: D5830376
fbshipit-source-id: 9b56f80
Summary:
The reporting phases iterates over each procedure summary and print all the issues from each procedure.
That's nice because we don't have to build a big list of the issues in-memory, but it's not so nice if you want to ouput the reports in a certain order or de-duplicate them.
This diff builds the in-memory list and outputs the issues afterward. By itself, this isn't very useful. But in the near future it will allow us to:
- Group all of the issues from the same file (finally!!!)
- Get rid of duplicate issues on multiple instantiations of the same C++ template
- Probably other cool stuff too
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D5816646
fbshipit-source-id: 799bcd0
Summary:
"Running as clang" was its own infer subcommand. That's not terribly good
because it makes it hard to specify another subcommand, and in particular it
broke the `compile` subcommand in some integrations because "running as clang"
would always do capture. The cmake tests required to run with `--keep-going`
because of this.
Instead of having its own fake subcommand, simply add a new boolean in the
config for "infer runs as clang", as we do for javac already (used in the mvn
integration).
Also make logging of the environment better.
Reviewed By: jberdine
Differential Revision: D5813986
fbshipit-source-id: 72b96cd
Summary: I often find myself needing a generic `Pp.seq` where I can specify the separator.
Reviewed By: jeremydubreil
Differential Revision: D5803915
fbshipit-source-id: fb8d30d
Summary: Try to preserve the original backtrace. Introduce `reraise` in the global namespace.
Reviewed By: jberdine
Differential Revision: D5804121
fbshipit-source-id: 0947a47
Summary: With this diff, the analysis trace will jump to the definition of the skipped methods when the location is known. This is especially useful when the analysis is relying on the method annotations.
Reviewed By: sblackshear
Differential Revision: D5783428
fbshipit-source-id: 561b739
Summary: With Logging.exit you have more control of the code that invokes exit, for example when forking and running certain functions that may in turn invoke exit, and you want to handle the execution flow differently - like invoking certain callbacks before exiting, or not exiting at all.
Reviewed By: jvillard
Differential Revision: D5746914
fbshipit-source-id: 596fba1
Summary:
We supported globals as sources before, but we did so by allowing ClangTrace etc. to match against any access path in the footprint of the trace.
This is very powerful/flexible, but it's ultimately not a good idea because it leads to traces that are hard to read.
This is because a footprint source doesn't have any information about its provenance: we might know that the value came from a global, but we don't know where the read occurred.
The mechanism for handling procedure calls as sources already knows how to solve this problem.
This diff implements globals as sources as a special case of procedure call sources instead.
This will give us much nicer traces with full provenance of the read from the global.
Reviewed By: mbouaziz
Differential Revision: D5772299
fbshipit-source-id: 491ae81
Summary: It is not clear to me what the removed code was for in the first place. Basically, it was replacing the pure part of propositions in a semantically equivalent way, e.g. replacing `a = b /\ Attribute(a)` to `a = b /\ Attribute(b)`, and `a = b /\ Attribute(b)` to `a = b /\ Attribute(a)`.
Reviewed By: jberdine
Differential Revision: D5657366
fbshipit-source-id: 93cd9e0
Summary: We used to crash whenever we hit these. The simple translation implemented here is not particularly inspiring, but it is better than crashing.
Reviewed By: jvillard
Differential Revision: D5702095
fbshipit-source-id: 3795d43
Summary: This adds an option to only translate the body of a method when the file matches the give pattern. This is especially intended to be use for generated files.
Reviewed By: jvillard
Differential Revision: D5729120
fbshipit-source-id: 1e28469
Summary: With this, we can now get now get inter-procedural issues involving native methods.
Reviewed By: sblackshear
Differential Revision: D5730638
fbshipit-source-id: 3bdbdbd
Summary: Atoms of the form `identifier = footprint var` naturally occurs with the angelic analysis mode. So it is not clear to me why we should drop those.
Reviewed By: sblackshear
Differential Revision: D5654754
fbshipit-source-id: 9dd2eb5
Summary:
- failwith police: no more `failwith`. Instead, use `Logging.die`.
- Introduce the `SimpleLogging` module for dying from modules where `Logging`
cannot be used (usually because that would create a cyclic dependency).
- always log backtraces, and show backtraces on the console except for usage errors
- Also point out in the log file where the toplevel executions of infer happen
Reviewed By: jeremydubreil
Differential Revision: D5726362
fbshipit-source-id: d7a01fc
Summary: This makes the traces more readable when involving skipped functions.
Reviewed By: sblackshear
Differential Revision: D5731683
fbshipit-source-id: 49d363b
Summary:
This simplifies the jbuild files: no need to list these files explicitly
anymore, nor to exclude them explicitly from the main `InferModules` library
(due to their different compilation flags).
Isolate common parts into jbuild.common do `cat`-based code inclusion into
jbuild files to factorize code.
Reviewed By: jberdine
Differential Revision: D5678328
fbshipit-source-id: 6d7d925
Summary: In case of syntax errors in AL files, stdout will contain a JSON list with all files affected by the errors, including info like filename and line number.
Reviewed By: dulmarod, jvillard
Differential Revision: D5640272
fbshipit-source-id: 569b16d
Summary: This check is not possible in Java as it natirally happens in the totally legit case of the `try ... finally`.
Reviewed By: sblackshear
Differential Revision: D5568802
fbshipit-source-id: 24ca074
Summary:
Instead of a whitelist and blacklist and default issue types and default
blacklist and filtering, consider a simpler semantics where
1. checkers can be individually turned on or off on the command line
2. most checkers are on by default
3. `--no-filtering` turns all issue types on, but they can then be turned off again by further arguments
This provides a more flexible CLI and is similar to other options in the infer
CLI, where "global" behaviour is generally avoided.
Dynamically created checkers (eg, AL linters) cause some complications in the
implementation but I think the semantics is still clear.
Also change the name of the option to mention "issue types" instead of
"checks", since the latter can be confused with "checkers".
Reviewed By: jberdine
Differential Revision: D5583238
fbshipit-source-id: 21de476
Summary:
This gives additional information to users. For instance:
```
--biabduction
Activates: the separation logic based bi-abduction analysis using
the checkers framework (Conversely: --no-biabduction)
This option is relevant to infer-analyze(1).
```
Reviewed By: sblackshear
Differential Revision: D5583197
fbshipit-source-id: 2960b90
Summary:
The only path to the `MergeCaptured.slink` function is when we should merge, so
it doesn't make sense to check `Config.merge` again. In the case of `infer run
--flavors -- buck ...`, this would create regular symlinks instead of the much
faster multilinks.
Reviewed By: jberdine
Differential Revision: D5574020
fbshipit-source-id: df710ca
Summary:
This is a needed step in the direction of making prenalysis functional: it will return a view of the CFG rather than mutating the CFG.
ProcCfg already works by providing a view on the underyling CFG, but the bi-abduction can't leverage this because it uses the "raw" CFG.
This diff does a partial swap of the raw CFG for an exceptional ProcCfg. The goal is to make sure the bi-abduction never calls `Procdesc.get_instrs`; it should use the `ProcCfg` wrapper instead.
That way, preanalyses that add instructions (like the liveness prenalysis) will work.
There's still some calls to `Procdesc.get_succs` etc., but we can remove those in a future diff.
They're not on the critical path because the current preanalyses only add instructions, not nodes or edges.
Reviewed By: jeremydubreil
Differential Revision: D5556387
fbshipit-source-id: 4ffda00
Summary: Useful for identifying user-controlled array accesses that could lead to buffer overflows
Reviewed By: mbouaziz
Differential Revision: D5520985
fbshipit-source-id: 92984f6
Summary: This is unused, as far as I can tell. If we want to revive it, we can do it in AL or as a simple checker; it certainly doesn't require the full might of bi-abduction.
Reviewed By: jeremydubreil
Differential Revision: D5556325
fbshipit-source-id: e3895c2
Summary:
Replace `inferTraceBugs` with `infer-explore` with a similar CLI. Some options changed:
- --max-level -> --max-nesting, and "max" is the default value instead of a possible value
- --no-source -> --no-source-preview
Reviewed By: mbouaziz
Differential Revision: D5526651
fbshipit-source-id: 8383f37
Summary:
In some cases we normalize expressions to check some facts about them. In these
cases, trying to keep as much information as possible in the expression, such
as the fact it comes from a `sizeof()` expression, is not needed. Doing
destructive normalization allows us to replace `sizeof()` by its
statically-known value.
closes#706
Reviewed By: mbouaziz
Differential Revision: D5536685
fbshipit-source-id: cc3d731
Summary:
Do not use the deprecated (and slower) `#infer` flavor. Instead, `infer-run`
runs capture with the `#infer-capture-all` flavor, followed by merging targets,
followed by the analysis.
Move the call to `MergeCapture` around to make this change easier.
Reviewed By: mbouaziz
Differential Revision: D5547199
fbshipit-source-id: 53c9996
Summary: Those are not particularly relevant for the biabduction analysis. It would be easy to have a dedicated checker for this if we happen to need one day.
Reviewed By: sblackshear
Differential Revision: D5530834
fbshipit-source-id: 316e60f
Summary:
The Eradicate `Nullable` checker should now be run using:
infer -a checkers --eradicate ...
Reviewed By: mbouaziz
Differential Revision: D5529226
fbshipit-source-id: 0de2956
Summary:
This is unsound but will help the analysis to report less false alarms with the common pattern:
if (a.get() != null) {
a.get().foo();
}
Reviewed By: sblackshear
Differential Revision: D5528227
fbshipit-source-id: 750db4a
Summary:
Previously, only the bug type + file name (up to renaming) were taken into
account, which was too coarse. The key is file-independent and provides
additional signal.
Reviewed By: martinoluca
Differential Revision: D5536858
fbshipit-source-id: 70b732b
Summary: This was reusing the side effects of the `add_constraints_on_retval` for the final purpose of being angelic and just assigning a fresh value to the lhs of the load.
Reviewed By: sblackshear
Differential Revision: D5507037
fbshipit-source-id: ec1c89c
Summary: This seems more in line with the expectations of the JSON format.
Reviewed By: mbouaziz
Differential Revision: D5500939
fbshipit-source-id: 76dcc47
Summary: This used to be in a different module but now that `driver_mode` is in `Driver` it should really be called `Driver.mode`.
Reviewed By: mbouaziz
Differential Revision: D5499575
fbshipit-source-id: ab96473
Summary:
If you run `infer report --issues-txt ilovecats.txt ...` then bugs may mysteriously miss from `ilovecats.txt`, unless you flush. (See rules of thumb for `Format` module.)
Closes https://github.com/facebook/infer/pull/694
Reviewed By: mbouaziz
Differential Revision: D5442335
Pulled By: jvillard
fbshipit-source-id: 73272a0
Summary: Using a dedicated abstract domain, like Quandary does, is more suitable for taint analysis.
Reviewed By: sblackshear
Differential Revision: D5473794
fbshipit-source-id: c917417
Summary:
Both `stringWithUTF8String` and `stringWithString` implements copy semantics that copies the content of their parameter into a newly allocated buffer. We modeled this as pointer assignment in the past, which means that once we write
```
NSString* foo() {
char buf[...];
...
return [NSString stringWithUTF8String:buf];
}
```
We are going to get a spurious stack variable address escape report because local pointer `buf` is assigned to the newly created string and the string gets returned.
This diff tries to address the issue by heap-allocating a buffer and `memcpy` the contents in `stringWithUTF8String` and `stringWithString`. But this change will create another problem: the allocated buffer will be reported as leaked by the backend, while in reality those buffers won't actually be leaked as they are allocated in a region that will be periodically autoreleased. To suppress spurious memory leak FPs, I added another attribute `Awont_leak` that will suppress the leakage report on any expressions that get tagged with it.
Reviewed By: jeremydubreil
Differential Revision: D5403084
fbshipit-source-id: df6de7f
Summary:
First steps towards implementing diff analysis functionalities inside infer
itself. What works: run infer, checkout parent, re-run infer, checkout top
revision, compute the reportdiff (but no final surfacing on the console). Lots
of TODO still, inlined in the code.
Reviewed By: jberdine
Differential Revision: D5364226
fbshipit-source-id: 5b7f9a5
Summary:
Allowing the user to configure where to store the JSON report is asking for
trouble. In fact, some places in the code hardcoded "results.json" anyway.
Someone wanting to have results.json somewhere else can still copy report.json
once infer has run.
Reviewed By: jberdine
Differential Revision: D5415079
fbshipit-source-id: 9439cb6
Summary: Introduce `Logging.die` to try and exit with consistent error codes depending on what failed.
Reviewed By: mbouaziz
Differential Revision: D5406642
fbshipit-source-id: 25d98fc
Summary: This will allow us to gradually get rid of the exceptions thrown during the analysis while detecting the regressions earlier
Reviewed By: jberdine, jvillard
Differential Revision: D5385154
fbshipit-source-id: 605e3f5
Summary:
Conversion and reformat of infer source using ocamlformat
auto-formatting tool.
Current status:
- Because Reason does not handle docstrings, the output of the
conversion is not 'Warning 50'-clean, meaning that there are
docstrings with ambiguous placement. I'll need to manually fix
them just before landing.
Reviewed By: jvillard
Differential Revision: D5225546
fbshipit-source-id: 3bd2786
Summary: This will allow to replace type vars into concrete types in expressions.
Reviewed By: jvillard, mbouaziz
Differential Revision: D5209276
fbshipit-source-id: c1650f8
Summary: This is useful when we only want to examine the html for some but not all source files.
Reviewed By: jvillard
Differential Revision: D5334786
fbshipit-source-id: 774c23c
Summary: Rename historical option to its new form, since the old form was no longer accepted by infer.
Reviewed By: martinoluca
Differential Revision: D5329033
fbshipit-source-id: 4fa9402
Summary:
We keep track of both `beginPtr` and `endPtr` but the modelling was mostly
about `beginPtr` as some sort of approximation I guess. This shouldn't change
much but will be useful later when doing more iterator stuff.
Reviewed By: mbouaziz
Differential Revision: D5255772
fbshipit-source-id: 0f6e3e8
Summary:
This will be needed to re-use the functions now in Driver.ml in other contexts
without always adding to infer.ml. For instance, this is used in a later diff
to do a diff-analysis orchestrator that needs to run the capture and analysis
several times.
Reviewed By: jberdine
Differential Revision: D5319862
fbshipit-source-id: caf9551
Summary: Needed in a later diff to be able to compute the set of changed files *during* an infer execution.
Reviewed By: jberdine
Differential Revision: D5319667
fbshipit-source-id: 226ec91
Summary:
Thanks to the logging introduced in D5293334 (or because of, depending on your liking of spam), I noticed that there lots of errors being logged of the form
Couldn't read multilink file '/home/jul/infer/infer/tests/codetoanalyze/cpp/errors/infer-out/attributes/d0/multilink.txt': /home/jul/infer/infer/tests/codetoanalyze/cpp/errors/infer-out/attributes/d0/multilink.txt: No such file or directory
I don't think it makes sense to care about multilink files except when `--merge` is specified.
Also introduced a .mli and self-documented a function.
Reviewed By: akotulski
Differential Revision: D5310129
fbshipit-source-id: c3a6276
Summary:
Once the fixed/preexisting/introduced sets have been computed, they endure
further filtering which may decide that more of them are equal. These bugs just
get dropped on the floor. Put these into preexisting as well instead, at least
in the case of the "skip_duplicated_types_on_filenames" filter.
Reviewed By: martinoluca
Differential Revision: D5274248
fbshipit-source-id: 99b3f3d
Summary: This change introduces the a new argument that lets you restrict the results of a differential report to only certain files.
Reviewed By: mbouaziz
Differential Revision: D5236626
fbshipit-source-id: 52711e9
Summary:
Only one instance will win in the end so it's not useful to double register.
Log when that happens. Currently it happens in the Java tests on
`InferBuiltins` but I don't understand why so I left it alone.
Reviewed By: jberdine
Differential Revision: D5217928
fbshipit-source-id: dc7ccca
Summary:
This avoids race conditions when two processes or more try to lock a file for
writing. It could be that the process losing the race writes less than the
winner, then we get rubbish at the end of the file. Calling `ftruncate(2)` inside the critical section makes sure the
contents of the file are erased first. The harmful race was observed in
xcodebuild sometimes, as it can call infer on the same file several times in
parallel (!).
Reviewed By: jberdine
Differential Revision: D5209177
fbshipit-source-id: 744169c
Summary: I tested on Fresco and this reduced the number of calls to Prover.check_disequal by 30%.
Reviewed By: cristianoc
Differential Revision: D5237774
fbshipit-source-id: 377545e
Summary:
Now that we can run several inter-procedural analyses at the same time, we should no longer use the function `Reporting.log_error_deprecated` as it logs the errors in the specs table. This specs table is normally used for caching and will be deprecated in favor of having a cache summaries for the callees in the `Ondemand` module (to avoid deserialising a callee more than once within the same process).
This revision just renames the reporting functions.
Reviewed By: sblackshear
Differential Revision: D5205009
fbshipit-source-id: b066549
Summary:
This messes up with the Buck cache: if infer recaptures a file with only trivial changes that shouldn't affect the capture Buck will still believe it has to reanalyze everything that depends on that file if there's non-deterministic data in infer's output.
Re-use the `--buck` flag used by the Java Buck integration for mostly the same purposes. Add a few special cases for the flavours integration (eg: keep capture data).
Change perf stats registration to take `Config.buck_cache_mode` into account instead of relying on each call site to handle that peculiarity correctly. Also, there's no need to create the perf stats directories before calling the registration function since it will do that too.
Reviewed By: jeremydubreil
Differential Revision: D5192311
fbshipit-source-id: 334ea6e
Summary:
It is not used, so one fewer thing to track inside Python.
Note that Python does pass `--buck` to OCaml infer to make it aware that it is
running from within Buck, and the OCaml code uses that flag to trim infer-out
to only what's strictly necessary (and especially to remove non-deterministic
output that would mess with Buck's cache).
Reviewed By: jberdine
Differential Revision: D5200043
fbshipit-source-id: 1c84442
Summary:
Change the API of `Logging` wrt to writing to files and to the console (see
changes in logging.mli).
Write only to one log file: infer-out/log. Prefix each line with the kind of
warning and the PID of the process emitting it. Writing with `O_APPEND` is
atomic so the file should not get garbled by concurrent writes. To get the
output of a single process, find out which one interests you by looking at
infer-out/log, then `grep ^[<PID>] infer-out/log`.
Introduce 3 log levels for debug output and command-line options to set them
for various categories individually.
Change tons of `"\n"` to `"@\n"` so the `Format` module is aware of newlines
without us having to look through every character of every logged string for
`\n` characters.
Reviewed By: mbouaziz
Differential Revision: D5165317
fbshipit-source-id: 93c922f
Summary:
Introduce a new option `--no-report` (conversely `--report`) to stop reporting
after the analysis. This is useful to call sub-`infer-analyze` processes with
as they shouldn't compute "result.json" or report bugs to stderr. This bug
would only manifest itself when per-procedure parallelism disabled, which
explains why it was noticed only on Java.
Reviewed By: jberdine
Differential Revision: D5182110
fbshipit-source-id: a892470
Summary:
The logic is not that simple and this will be needed in a later diff to create
the log file as early as possible.
Reviewed By: jberdine
Differential Revision: D5173128
fbshipit-source-id: 830f105
Summary: This also allows us to better test that the new commands will keep working.
Reviewed By: jeremydubreil
Differential Revision: D5172891
fbshipit-source-id: 169bd6f
Summary:
Now `infer analyze` really has the same behaviour as `infer -- analyze`.
Previously it wouldn't create report.json or report.
Reviewed By: jeremydubreil
Differential Revision: D5172875
fbshipit-source-id: 8f9ddd1
Summary:
This will be needed higher up in the stack because the new `ProcessPool` module
will need to call into `Logging` to refresh the logging formatters to get the
right PID when writing to the log file.
+remove dead code `iter_parallel`
Reviewed By: jberdine
Differential Revision: D5165130
fbshipit-source-id: 95c949b
Summary: Allow type variables in `Typ.desc`. It will be used to store template type arguments.
Reviewed By: jberdine
Differential Revision: D5154757
fbshipit-source-id: 55b8e81
Summary: The previous error message recommended annotating the method in question with `GuardedBy`, which doesn't actually work.
Reviewed By: jeremydubreil
Differential Revision: D5149661
fbshipit-source-id: d935aec
Summary:
A recent diff tried to replace `L.out "error message"; assert false` with
`failwith "error message"` but infer relies on the type of raised exceptions to
sometimes keep going. A more careful change will be needed but in the meantime
restore the old behaviour.
Reviewed By: jberdine
Differential Revision: D5112969
fbshipit-source-id: 713fe20
Summary: There were some leftover uses of the `Tracing` analyzer option. While I was at it, I also rename the `Config` option name.
Reviewed By: jberdine
Differential Revision: D5113489
fbshipit-source-id: 68d5cc8
Summary:
Try and enforce the following rules:
- stderr is for updating the user about progress or errors
- Introduce Logging.progress that outputs to stderr, but honours --quiet
- Logging.stderr is as before
- Logging.out now prints to stderr (or to log files as before if set up) and
not stdout. If some information should go on stdout then the user should be
able to rely on it (ie, it's not just some progress message). For now only
the summary of the errors is printed on stdout by default.
- Logging.err* functions are gone. If the error is user-visible, it should be
Logging.stderr, or `failwith`. If not, go to the same log file as other
output, which personally I find much more convenient than having to dig through
2 log files every time I'm looking for some output.
Reviewed By: jberdine
Differential Revision: D5095720
fbshipit-source-id: 68999c9
Summary:
`infer analyze ...` (and `InferAnalyze` before it) was not actually running the
analysis in parallel, unlike `infer -- analyze`, which we want to deprecate.
Reviewed By: jberdine
Differential Revision: D5095676
fbshipit-source-id: ec28465
Summary:
After:
```
$ infer run -- clang -c examples/hello.c
Capturing in make/cc mode...
Found 1 source file to analyze in /home/jul/infer/infer-out
Starting analysis...
legend:
"F" analyzing a file
"." analyzing a procedure
F.
Found 1 issue
examples/hello.c:14: error: NULL_DEREFERENCE
pointer `s` last assigned on line 13 could be null and is dereferenced at line 14, column 3
12. void test() {
13. int* s = NULL;
14. > *s = 42;
15. }
Summary of the reports
NULL_DEREFERENCE: 1
```
Before, legend and analysis run were separated by 2 lines, one is now before
and the other is in the log files only:
```
Capturing in make/cc mode...
Starting analysis...
legend:
"F" analyzing a file
"." analyzing a procedure
Found 1 (out of 1) source files to be analyzed in /home/jul/infer/infer-out
per-procedure parallelism jobs:4
F.
Found 1 issue
examples/hello.c:14: error: NULL_DEREFERENCE
pointer `s` last assigned on line 13 could be null and is dereferenced at line 14, column 3
12. void test() {
13. int* s = NULL;
14. > *s = 42;
15. }
Summary of the reports
NULL_DEREFERENCE: 1
```
Reviewed By: mbouaziz
Differential Revision: D5069590
fbshipit-source-id: 8843422
Summary: The issues that are not reported by default are all experimental issues from the biabduction analysis. In that case, it is easier to use a blacklist of errors to filter out so that the issues found by the checkers based on the AI framework can be reported by default without having to add them to the whitelist.
Reviewed By: jvillard
Differential Revision: D5051327
fbshipit-source-id: 2a93b11
Summary:
An array has a static or dynamic length (number of elements), but it also has a
stride, determined by the type of the element: `sizeof(element_type)`. We don't
have a good `sizeof()` function available on SIL types, so record that stride
in the array type.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D4969697
fbshipit-source-id: 98e0670
Summary:
Introduce `infer-<command>` for each command, except for internal commands
(only `infer-clang` for now) which are not exported. Install these executables
(which are just symlinks to `infer`) on `make install`. The main executable
looks at the name it was invoked with to figure out if it should behave as a
particular command.
Get rid of `InferClang`, `InferAnalyze`, and `InferPrint`. As a bonus, we now
only need to build one executable: `infer`, which should be a few seconds
faster (less link time).
`InferAnalyze` is now `infer-analyze` and `InferPrint` is `infer-print`. To run
`InferClang`, use a symlink named `clang`, `clang++`, etc. to `infer`. There
are such symlinks available in "infer/lib/wrappers/" already.
I also noticed that the scripts in xcodebuild_wrappers/ don't seem useful
anymore, so use wrappers/ instead, as for `make`.
Reviewed By: mbouaziz
Differential Revision: D5036495
fbshipit-source-id: 4a90030
Summary:
Glorious, glorious man pages.
This changes a bunch of things that were hard to break up from the diff, so the
resulting diff is big.
Use `Cmdliner.Manpage` to format man pages (and also format a bit ourselves
since it is so stubborn).
As a bonus, introduce the following subcommands:
```
infer run ... # same as default mode with -- before
infer capture ... # -a capture
infer compile ... # -a compile
infer analyze ... # InferAnalyze
infer report ... # InferPrint
infer diff ... # this one is not new
infer clang ... # InferClang, not that you should use it
```
The man pages can still be improved a lot. Notable missing sections:
`ENVIRONMENT`, stuff about .inferconfig, some example usage, `DESCRIPTION`, ...
Reviewed By: jberdine
Differential Revision: D4921083
fbshipit-source-id: 9602230
Summary:
With this change, running the biabduction analysis with
infer -a infer -- ...
or with:
infer -a checkers --biabduction -- ...
take the same time and give the same list of results.
Reviewed By: sblackshear
Differential Revision: D5026676
fbshipit-source-id: ef23911
Summary:
In the case of the Buck integration for Java, the summary of the procedure may be found from the classpath even though the procedure description is not available.
Depends on D5027049
Reviewed By: jvillard
Differential Revision: D5027188
fbshipit-source-id: b1a6095
Summary: The procedure description is available when initializing the analysis summary, so it is simpler to use it than to rely on loading the data from the attributes.
Reviewed By: jvillard
Differential Revision: D5027049
fbshipit-source-id: 92cac5c
Summary: Stops Quandary errors from getting dropped on the floor when it runs alongside the other checkers.
Reviewed By: jeremydubreil
Differential Revision: D5010801
fbshipit-source-id: 2847f61
Summary: This actually fixes issues of infinite loop as the function `Specs.set_status` was saving the `Active` status in the summary from the specs table which could differ from the summary passed as argument to the checkers
Reviewed By: sblackshear
Differential Revision: D5025923
fbshipit-source-id: c23a6f9
Summary:
Now,
infer -a infer -- ...
and
infer -a checkers --biabduction -- ...
will return the same list of errors
Reviewed By: sblackshear
Differential Revision: D5023223
fbshipit-source-id: f52ce5d
Summary:
Ran the build with -w,-32 , delete code, repeat, until a fixpoint of no more warnings is reach.
Unfortunately we cannot fatal on w32 because ppx_compare can generate dead code (eg `compare_t` and only `compare` is used).
Reviewed By: mbouaziz
Differential Revision: D4945800
fbshipit-source-id: c95afb6
Summary:
The bufferoverrun checkers can now be run with:
infer -a checkers --bufferoverrun -- ...
Reviewed By: jeremydubreil
Differential Revision: D5010689
fbshipit-source-id: 2eaa396
Summary:
The Siof checkers can now be run with:
infer -a checkers --siof -- ...
and also runs by default using:
infer -a checkers -- ...
Reviewed By: jberdine
Differential Revision: D5009731
fbshipit-source-id: e0e2168
Summary:
First step to be able to enable and disable the checkers to run in the following form:
> infer -a checkers --checker1 --checker2 --checker3 -- ...
and have a predefined list of checkers that are run by default with:
> infer -a checkers -- ...
Reviewed By: sblackshear
Differential Revision: D5007377
fbshipit-source-id: d7339ef
Summary:
This gives the option to run the biabduction analysis together with the other Clang-based checkers with the command:
infer -a checkers --biabduction -- ...
The filtering does not work yet because the filtering for the biabduction analysis matches the analyzer `Infer`, and does not filter much when the analyzer is `Checkers`, which is the case here.
Reviewed By: sblackshear
Differential Revision: D4773834
fbshipit-source-id: 16300cc
Summary:
`Location.dummy` is often used in a situation where we know the source file, but not the line/column.
Use `Location.none` for this instead.
Reviewed By: jeremydubreil
Differential Revision: D4991232
fbshipit-source-id: fc361a4
Summary: The name of the source file was passed around everywhere but can also be accessed from the location associated to every node.
Reviewed By: sblackshear
Differential Revision: D4981848
fbshipit-source-id: 2ee592e
Summary: Now, all the summary access functions in the module `Specs` are of the form: `Specs.summary -> 'a`. This is a step toward making the analysis flow stateless.
Reviewed By: sblackshear
Differential Revision: D4976126
fbshipit-source-id: 28b6da1
Summary: This code only runs when Infer is running and is not reached when any other analyzer is used
Reviewed By: sblackshear
Differential Revision: D4973824
fbshipit-source-id: 700e24b
Summary: The Java frontend creates a single `tenv` file per `javac` invocation, but the code loading the `tenv` for a given Java procedure in the backend was not taking advantage of it. Also, with the lazy dynamic dispatch algorithm, the procedure name can be created on-demand and therefore defeat the approach to load the tenv by looking at the call graph to associate existing procedure names to the corresponding serialized tenv file. This diff should also fix this last point.
Reviewed By: sblackshear
Differential Revision: D4969254
fbshipit-source-id: 66ed318
Summary:
Modify the type of `Exp.Sizeof ...` to include the value that the expression
evaluates to according to the compiler, or None if it cannot be known
statically.
Use this information in inferbo.
Mostly unused in the BiAbduction checker for now, although it could be useful
there too.
update-submodule: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D4953634
fbshipit-source-id: be0999d
Summary: Sometimes reports need traces to be fully understood, but sometimes reporting where the exception takes place can save time to developers.
Reviewed By: jvillard
Differential Revision: D4914037
fbshipit-source-id: 039ab63
Summary: The analysis logic was split between the treatment of the instructions and the definition of the domain, making the code more complicated that it should. This diff moves more of the logic into the domain definition and change to variable names to more descriptive ones
Reviewed By: sblackshear
Differential Revision: D4936414
fbshipit-source-id: ff59de7
Summary: This is necessary to create a `report` subcommand (see later diffs).
Reviewed By: jberdine, dulmarod
Differential Revision: D4937488
fbshipit-source-id: 3fec0b5
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary:
OCaml 4.04.0 new warnings raised a few valid points!
Fixing warning 57 in two ways:
- best way: introduce an auxiliary function to avoid code duplication
- not-so-best way: introduce code duplication. I did that when the branches body are small. Typically the number of bound variables in the pattern is high, so an auxiliary function would need to take many arguments and the whole thing will not be readable (we'd still duplicate the arguments we pass to the function for instance).
Reviewed By: jberdine
Differential Revision: D4851006
fbshipit-source-id: fbf1867
Summary:
Limit the use of `SourceFile.invalid` (renamed from `SourceFile.empty`) as much
as possible. In particular, do not generate bogus procnames for external global
variables: their translation unit was set to the invalid source file, now we
distinguish between extern/non-extern global variables more explicitly.
`SourceFile.invalid` is still used in too many places to actually remove it, often as a dummy initial value that never gets used, but sometimes as an actual value... Worse, we cannot fail on all operations on `SourceFile.Invalid` yet: the `SourceFile.to_string` method is used in too many places where it could get `SourceFile.Invalid` as argument. It's easy to see where it's used by making it raise in the code, then running the tests. This results in spaghetti backtraces that are hard to trace back to a root cause.
Reviewed By: akotulski, jeremydubreil
Differential Revision: D4860019
fbshipit-source-id: 45be040
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary: This is required to upgrade OCaml as our ancient Reason is not available on 4.04.0.
Reviewed By: yunxing
Differential Revision: D4851582
fbshipit-source-id: 994a9a8
Summary:
It's distracting to see the debug HTML for the preanalysis when you're trying to debug something else.
Also, it breaks the nice bi-abduction debug feature of marking the visited nodes as green.
Reviewed By: akotulski
Differential Revision: D4858578
fbshipit-source-id: 8e77976
Summary:
We shouldn't encourage contributors to run only a subset of the tests with
`make test`, but it's more helpful to complain clearly should they try to do
so.
Now `make test` will ensure that both the clang and the Java analyzers are
enabled, otherwise it will refuse to run and suggest to run `make config_tests`
instead.
It can still be useful to be able to run only the Java or Clang tests. The diff
also fixes the cases where that previously failed.
Fixes#634
Reviewed By: jberdine
Differential Revision: D4826515
fbshipit-source-id: 4b76029
Summary:
Make it possible to write one model which will be used by all template instantiations.
There is one big missing piece: infer never tries to do template instantiation by itself. With current code, it's possible to use generic models
as long as header contains `__infer_generic_model` annotation (see the test as an example).
This is not viable to modify all headers with this annotation hence infer will try to do template instantiation for generic models in later diffs.
Reviewed By: jberdine
Differential Revision: D4826365
fbshipit-source-id: 2233e42
Summary:
Currently --per-procedure-parallelism defaults to a chunk size of 1
procedure, which has a high overhead. Add a command line option to
control it, and raise the default value.
Reviewed By: jvillard
Differential Revision: D4794692
fbshipit-source-id: 7715a40
Summary:
This is step further simplify the code to avoid cases where the summary of the procedure being analyzed can exist in two different versions:
# one version is the summary passed as parameter to every checker
# the other is a copy of the summary in the in-memory specs table
This diff implements:
# the analysis always run through the `Ondemand` module (was already the case before)
# the summary of the procedure being analyzed is created at the beginning of the on-demand analysis call
# all the checkers run in sequence, update their respective part of the payload and log errors to the error table
# the summary is store at the end of the on-demand analysis call
Reviewed By: sblackshear
Differential Revision: D4787414
fbshipit-source-id: 2d115c9
Summary:
Adds a new type and branching for a missing path of execution.
closes#575
Reviewed By: jvillard
Differential Revision: D4738681
fbshipit-source-id: f72344c
Summary:
Improve type of `Fieldname.t` in `Clang` variant - make it store qualified classname and method name.
Based on those changes, fix matching in `Errdesc` to use `QualifiedCppName.Match` instead of string comparisons
Reviewed By: jberdine
Differential Revision: D4746735
fbshipit-source-id: 6f52413
Summary:
Split Fieldname.t into `Java` and `Clang`. Each of them have different naming conventions and this way it's easier to differentiate between them.
Make `Java` variant store string instead of mangled since mangled part was always empty
Changes to `Clang` variant are coming in the next diff
Reviewed By: jeremydubreil
Differential Revision: D4746708
fbshipit-source-id: c5858a8
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary: There was a lot of indirection going on in `Typ.Name` type definition. Inline all those indirections into single variant type
Reviewed By: jberdine
Differential Revision: D4737644
fbshipit-source-id: c5e181b
Summary:
It is definitely useful to collect information about how long the analysis of every procedure takes. It allows to detect and focus on outliers when trying to improve performance. However, this kind of information could be collected using a standard logging mechanism and does not need to be stored within the analysis artifacts.
I intend to add some form of similar logging in the context of #16348004 once we can get every analysis procedure analyzed through the `Ondemand` module. In this case, it would be easy to have a single place to log how does the analysis of a procedure take.
Reviewed By: jberdine
Differential Revision: D4636755
fbshipit-source-id: 01f3bca
Summary: Fail early when there is no registered callbacks to run the analysis of a procedure on-demand
Reviewed By: sblackshear
Differential Revision: D4573726
fbshipit-source-id: a8ee74b
Summary: Run all the checkers one after each other, which allows the Infer AI framework to run several checkers together, including the possibility for them to collaborate.
Reviewed By: sblackshear
Differential Revision: D4621838
fbshipit-source-id: e264d67
Summary:
This option is not needed anymore as it was introduced to counter an uncovered
perf issue with creating human readable reports. The perf issue has been
addressed.
Instead of this option, one can use `infer --report-hook /bin/true ...` to
disable reporting. However, right now the Buck integration doesn't honor it so
this would need to be fixed to be a true equivalent of `--disable-bug-list`.
Reviewed By: jberdine
Differential Revision: D4712877
fbshipit-source-id: a09304f
Summary:
Changes every checker to take a summary as parameter and return the updated summary to the next checker. Since several operations, like `Reporting.log_*` are modifying the summary in memory by loading them from the in-memory cache of summaries, we currently need to rely on `Specs.get_summary_unsafe` to return the updated version of the summary.
This diff allows to change the API of `Reporting` to take a summary as input and progressively remove all the calls `Specs.get_summary_unsafe` independently from adding the possibility to run several checkers at the same time. The final objective to have every checker just passing around the summary of the procedure being analyzed, and having the in-memory cache only use to store the summaries of the callees.
Reviewed By: sblackshear
Differential Revision: D4649252
fbshipit-source-id: 98f7ca7
Summary:
Add a new command-line option `--per-procedure-parallelism`, to change the granularity of parallelism of the analysis from file to procedure.
This is intended for `--reactive` mode where e.g. a single file is changed and the analysis currently uses just one core.
When the option is used, the Makefile mechanism is replaced by using forking instead.
The parent process does as little allocation as possible, to avoid taxing the kernel.
Caveats:
- Not active in Java, (issues with camlzip).
- Not active in checkers, yet.
Example use:
```
infer --reactive --changed-files-index index.txt --per-procedure-parallelism -- analyze
```
Reviewed By: jberdine
Differential Revision: D4634884
fbshipit-source-id: e358c18
Summary: I noticed we don't have `T` or `S` to denote timeouts in debug mode anymore. Today I saw it's still in `--stats` mode. Bring this feature back to `--debug` as well.
Reviewed By: cristianoc
Differential Revision: D4681669
fbshipit-source-id: 16ef19b
Summary:
Provide proper constructor functions for all Typenames following `Typename.Java` module.
Always use those constructor functions.
Reviewed By: jeremydubreil
Differential Revision: D4673943
fbshipit-source-id: 81625c2
Summary: This allows to run the analysis of every procedure on-demand separately from the cluster callbacks
Reviewed By: sblackshear
Differential Revision: D4664936
fbshipit-source-id: d218328
Summary: On Java Buck projects, InferPrint was loading all the specs files from all the jars in the classpath. This was affecting the performance a lot when the analysis was reporting a lot of issues.
Reviewed By: cristianoc
Differential Revision: D4673226
fbshipit-source-id: 6927836
Summary:
It used to be string which:
1. Doesn't have enough information for parametric models
2. Doesn't have good type
Changing this blows up in clang frontend, but I think it's for the better
Reviewed By: jberdine
Differential Revision: D4667633
fbshipit-source-id: 9f61bf1
Summary: I encountered cases where the class name part of the method name was passed as `(None, "package.Class")` instead of `("package", "Class")` and therefore incorrectly failing some inequality checks
Reviewed By: sblackshear
Differential Revision: D4662617
fbshipit-source-id: 98ee3e3
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary: The implementation of `touch_start_file` was not updating the timestamp when the file exists.
Reviewed By: jvillard
Differential Revision: D4657708
fbshipit-source-id: 0a88ebc
Summary: I accidentally save a summary with the wrong procedure name, which was affecting the analysis in some weird way. This makes this case no longer possible
Reviewed By: cristianoc
Differential Revision: D4654002
fbshipit-source-id: 9fcbe4e
Summary:
This is part of the plan to have every checker take a summary as input, and return the updated sumamry as output. Doing so, we can run all the registered checkers in sequence for every method
This diff change the type of `Ondemand.analyze_ondemand` to return the analysis summary.
Reviewed By: sblackshear
Differential Revision: D4626918
fbshipit-source-id: f8ad928
Summary:
All intermediate `.exp` files used for tests can be generated with custom info, based on what is needed for the tests purposes.
This customisation happens via command-line argument `--issues-fields`.
Reviewed By: cristianoc, jvillard
Differential Revision: D4628062
fbshipit-source-id: feaa382
Summary:
For writes of serialized data, write directly to the file instead of using a temporary one, and lock the file before writing.
Also added an `update` function to the API, to update an existing version of the data file instead of just replacing it with a new value.
Reviewed By: jberdine
Differential Revision: D4619958
fbshipit-source-id: 9642408
Summary: This seems to only be used for stats and for the concept of call rank that is not used right now
Reviewed By: cristianoc
Differential Revision: D4624681
fbshipit-source-id: 7406496
Summary:
With the ondemand analysis framework, the concept of timestamp was only being use to check if a procedure has already been analyzed. There was already a concept of "active" procedure for the procedure that were already being analyzed. This revision removes the concept of timestamp and merge it with the concept of analysis status.
This can be simplified further once the analysis always goes through `Ondemand.analyze`.
Reviewed By: cristianoc
Differential Revision: D4610371
fbshipit-source-id: 0fc516b
Summary:
Polymorphic models, and type environment refinements, need mutual
references between general types and struct types.
Reviewed By: cristianoc
Differential Revision: D4620076
fbshipit-source-id: f9d01e6
Summary: The summary was stored to disk at the end of the on-demand analysis, unless an exception was raised in which case it was only updated in the in-memory cache.
Reviewed By: sblackshear
Differential Revision: D4612369
fbshipit-source-id: 1c8d75b
Summary: The function `Checkers.ST.store_summary` was only used in one place. This revision moves the functionality to the only place where this function was used, except the part swallowing `Sys_error` which may have the bad side-effect of making issues like race-conditions silent.
Reviewed By: cristianoc
Differential Revision: D4608790
fbshipit-source-id: b84c8ce
Summary: This check is redundant and already happens in `Ondemand`.
Reviewed By: sblackshear
Differential Revision: D4605613
fbshipit-source-id: d249212
Summary:
It seems that what `Checkers.ST.store_summary` was called witin on-demand was actually redundant with what `Ondemand` is doing before storing the summaries.
This also makes the `Ondemand` module no longer depend on `Checkers` as the dependency is expected to be the other way around.
Reviewed By: sblackshear
Differential Revision: D4595006
fbshipit-source-id: d62187e
Summary: Shorter is better. `--compilation-database` was taken, renaming it to `--buck-compilation-database`.
Reviewed By: dulmarod
Differential Revision: D4567028
fbshipit-source-id: 011cd6f
Summary:
A good first step in order to run multiple checkers together is to prevent the analysis the analysis to side effect on the summaries of the method being analyzed from disk, or the shared specs summary. The idea is that `Ondemand` creates a summary for the procedure being analyzed and only saves the summary once all the checkers have been run. The summary for the caller (i.e. the procedure being analyzed) should never be looked up from disk during the analysis. In other words, the analysis should only ever lookup the summaries of the callees and the proposed solution to enforce this is to have `Ondemand.analyze_proc_name` be the only way to lookup the summary of a procedure.
Another objective is to make sure that the summaries are never saved to disk more than once.
Reviewed By: sblackshear
Differential Revision: D4549764
fbshipit-source-id: f0a6e21
Summary:
This simplifies a bit the code to run the analysis on all the prcedures in the cluster. Before, the functions procedure_should_be_analyzed, which loads the attributes, and get_proc_desc were called twice for the analysis of every procedure.
The objective is to remove the calls to procedure_should_be_analyzed and hide it from the ondemand API since it is already called before the analysis of every procedure.
Reviewed By: sblackshear
Differential Revision: D4553397
fbshipit-source-id: 02cffaf
Summary:
One gets very obscure errors when trying to run infer for clang when it was
compiled for Java, or vice-versa. This diff makes sure we crash early with the
appropriate error message. For instance:
```
$ ./build-infer java
$ infer -- clang -c hello.c
Uncaught exception:
(Failure
"Unsupported build mode: make/cc\
\nInfer was built with clang analyzers disabled.\
\nPlease rebuild infer with clang enabled.\
\n")
Raised at file "pervasives.ml", line 30, characters 22-33
Called from file "backend/infer.ml", line 398, characters 6-48
Called from file "backend/infer.ml", line 449, characters 20-38
$ infer --clang-compilation-db-files foo.json
Uncaught exception:
(Failure
"Unsupported build mode: clang compilation database\
\nInfer was built with clang analyzers disabled.\
\nPlease rebuild infer with clang enabled.\
\n")
Raised at file "pervasives.ml", line 30, characters 22-33
Called from file "backend/infer.ml", line 392, characters 8-65
Called from file "backend/infer.ml", line 449, characters 20-38
```
Reviewed By: sblackshear
Differential Revision: D4566641
fbshipit-source-id: d9a118f
Summary:
- inferbo introduced a dependency to extlib. When building Java analyzers, this
is implicitly pulled in by javalib, but it's missing when building only the
clang analyzers. Add `extlib` to the packages we build against.
- infer.ml and Javac.ml depend on Javalib, but it's easy to push down the code
that needs it to `jMain.ml` so that we can build without javalib for the
clang-only case.
- jMain.mli had 2 copies: one in java/ and one in java_stubs/. Make one a symlink to the other.
Reviewed By: jeremydubreil
Differential Revision: D4566581
fbshipit-source-id: 214a4eb
Summary:
Sevel auxiliary files made it to the output directory of the analysis of individual targets when analyzing Java projects build with Buck. However, these files are then taken into account= to compute the target rule key and then to decide whether to analyze the dependent targets. Since these auxiliary files were containing time sentive information, every cach miss on a given target would then invalitate the cache entries for all the dependent targets.
This diff cleans up the output directory to only keep the specs files, the `global.tenv` and the `report.json` files which are the only artifacts needed to analyze the dependent targets
This diff makes a minimal number of changes to see how it behaves in prod, but I intend to refoctor this more when continuing to add support for running Infer with genrules
Reviewed By: sblackshear
Differential Revision: D4562615
fbshipit-source-id: 4628420
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary:
At one point I thought we'd want to have lots of different schedulers for things like exploring loops in different orders, but that hasn't materialized.
Let's make the common use-case simpler by hiding the `Scheduler` parameter inside the `AbstractInterpreter` module.
We can always expose `MakeWithScheduler` later if we want to.
Reviewed By: jberdine
Differential Revision: D4508095
fbshipit-source-id: 726e051
Summary:
Clients should use `Config.parse_action` instead to figure in what mode they
are operating.
In particular, the biggest change is in logging. Take the `parse_action` into
account instead of the exe, and change the log/ subdirectories to be "capture",
"driver", "analyze", and "print", corresponding to the various phases of an
infer run.
Reviewed By: jberdine
Differential Revision: D4474943
fbshipit-source-id: 6d33ad3
Summary:
Infer used to report null dereference when field was accessed later:
```
vector<int> v;
int& a = v[0]; // should be EMPTY_VECTOR_ACCESS here, but it wasn't reported
int b = a; // was NULL_DEREFERENCE here
```
To avoid this problem, model all accesses to vector as dereference of its internal `beginPtr` field.
Reviewed By: jberdine
Differential Revision: D4481942
fbshipit-source-id: 2142894
Summary:
One of the things that confuses me about the current annotations API is that there's a lot of ways to do the same thing.
Some of the concepts like `annotated_signature` are only really needed by Eradicate.
This diff removes usages of `annotated_signature` outside of Eradicate (everyone else was just using `get_annotated_signature` as a roundabout way to get the return annotation of a procedure).
In the future, I'll move `get_annotated_signature` and other Eradicate-specific functionality into its own module inside the Eradicate directory.
Reviewed By: jberdine
Differential Revision: D4472058
fbshipit-source-id: 5bb0846
Summary:
`pdesc_has_annot` checks the annotations of both the return values and the parameters, which seems like a bad idea in general.
The client should have to specify which annotations they actually care about.
Converting existing uses of `pdesc_has_annot` to what I read as the intended behavior (checking the return annotation).
Will make better use of the other new functions in a follow-up.
Reviewed By: jeremydubreil
Differential Revision: D4469885
fbshipit-source-id: de5531e
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Summary:
Epilogue tasks such as closing logs or putting files back were we found them
run automatically at the end of our executables by registering them with
`at_exit`. They do not run if the program is interrupted by a signal. This diff
makes sure they are run when the user stops infer with Ctrl-C (SIGINT).
Reviewed By: cristianoc
Differential Revision: D4435575
fbshipit-source-id: c3ab702
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
Also make sure we don't introduce deprecated options in our repo, eg when
calling infer from infer.
Reviewed By: jeremydubreil
Differential Revision: D4430379
fbshipit-source-id: 77ea7fd
Summary:
Make the html output available to checkers when -g is used on the command-line.
A checker needs to call a function to start and finish the processing of each node,
and add prints during the processing.
This diff illustrates the case for Eradicate, by adding printing of the pre-state
and post-states.
Reviewed By: sblackshear
Differential Revision: D4421379
fbshipit-source-id: 67501ba
Summary:
Previously, we would first compute which build command is at hand, based on the
first argument after "infer --", then do everything depending on that piece of
information. However, the build command alone is not enough to know in which
"build mode" we are operating. For instance, there are several build modes
corresponding to "buck" build commands.
This led to duplication of the logic (to retrieve which build mode we are in in
the various phases of an infer run), and some invariants that had to be
re-asserted at various points in the code, eg that the arguments are not empty.
This diff adds a `build_mode` type (renaming the previous `build_mode` to
`build_system`) that identifies the various integrations we support. We compute
the build mode at the start of infer, then pass the build mode around.
Also, move `run_javac` to a new `integration/Javac.ml` file given that it's a
bit large.
Reviewed By: jberdine
Differential Revision: D4415074
fbshipit-source-id: db854a0
Summary:
Currently, if we don't find `-d` or `-classes_out` on the command line then we
tell javac to redirect the compiled classes in some other directory, by default
the initial working directory. But we don't detect when these arguments are
hidden inside files (`foo` arguments on the javac command line) so the
heuristic was incomplete. Look inside these files to better tell whether we need
to make up an output directory or not.
Reviewed By: jeremydubreil
Differential Revision: D4397716
fbshipit-source-id: 30c5e4f
Summary:
Sometimes we don't want to analyze but a message gets printed that there was
nothing to analyze and we exit with error, which is confusing.
Reviewed By: jberdine
Differential Revision: D4398120
fbshipit-source-id: 43ce3ab
Summary:
Add more debug output to be able to trace the calls to javac more easily
when --stats or --debug is passed to infer.
Reviewed By: sblackshear
Differential Revision: D4398100
fbshipit-source-id: 3012900
Summary:
This would fail before and works as expected now:
```
$ infer -- clang -c hello.c
$ cd infer-out/ && ln -s ../foo && cd ..
$ infer -- clang -c hello.c # crashes because it fails to delete infer-out/foo
```
Reviewed By: jberdine
Differential Revision: D4398763
fbshipit-source-id: 38465f8
Summary:
One of the tests was failing without `make clean` because infer-out didn't get
deleted when rerunning the clang db test. This was because infer thinks it's in
`Analyze` mode when capturing clang db files.
Reviewed By: akotulski
Differential Revision: D4397731
fbshipit-source-id: 26f423a
Summary:
This error message is confusing when the user is not actually running
InferPrint, eg `infer foo`: `Load Error: file foo: arguments must be .specs
files`.
With this diff, we don't get any error for `infer foo`, which is not great
either and will need to be addressed (do we support all the python arguments in
OCaml now too and are able to turn on argument parsing errors in OCaml land?).
Reviewed By: jberdine
Differential Revision: D4397765
fbshipit-source-id: e7ca48f
Summary:
A domain should not definite its initial state, since distinct users of the domain may want to choose different initial values.
For example, one user might want to bind all of the formals to some special values, and one user might want the initial domain to be an empty map
This diff makes this distinction clear in the types by (a) requiring the initial state to be passed to the abstract interpreter and (b) lifting the requirement that abstract domains define `initial`.
Reviewed By: jberdine
Differential Revision: D4359629
fbshipit-source-id: cbcee28
Summary:
Force clients to specify the path relative to which relative paths
should be made absolute.
Reviewed By: akotulski
Differential Revision: D4370262
fbshipit-source-id: 36a2807
Summary:
There is not much to redirect except for an uninformative line before proper
logging files are set up. This is from before the current logging system, which
has builtin support for logging into custom files.
Reviewed By: jberdine
Differential Revision: D4365988
fbshipit-source-id: 044290a
Summary:
Instead of opening new log files each time with non-deterministic names, keep
appending to the same log files. This only removes the randomized part of the
names in the files. In particular, it keeps the name prefixes for, eg, clang
source files.
Also changed most "<executable>/<executable>-out.log" to simply "<executable>/out.log".
Reviewed By: jberdine
Differential Revision: D4365983
fbshipit-source-id: 46792dc
Summary: This more easily allow to switch between the different modes for handeling dynamic dispatch
Reviewed By: sblackshear
Differential Revision: D4367556
fbshipit-source-id: 795d2c4
Summary: 957b243 removed the last use of `Exe_env.get_tenv ~create:true`
Reviewed By: jeremydubreil
Differential Revision: D4364521
fbshipit-source-id: 819efee
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary: Adding the information that a procedure has been modelled as part of the attributes, during the translation, instead of getting this information from where is the summary loaded from. This is more consistent with the use of the attributes in other parts of the analysis, but is also useful in the context of the lazy dynamic dispatch algorithm where the procedures, including the models, are cloned and reanalyzed with more specialized parameters. The information about whether a procedure is a model must persist when cloning the procedures.
Reviewed By: sblackshear
Differential Revision: D4356892
fbshipit-source-id: 40ff5ca
Summary:
When you try to log an error on a procedure P and a summary for P doesn't exist, the error gets quietly dropped on the floor.
But we should fail loudly instead, because this should only happen in the case of a user error.
Got burned by this today; I was trying to log an error on the *caller* of `Integer.parseInt`, but was accidentally logging it to `Integer.parseInt` itself instead.
Since no summary for that method exists, my error wasn't appearing.
Reviewed By: jvillard, jeremydubreil
Differential Revision: D4355546
fbshipit-source-id: db2a0e6
Summary:
The two concepts are not negation of each other. The type environment created by the different frontends is not guaranteed to contain a full view of the type hierarchy. In this case, there can be holes preventing Infer to prove that `t <: t'` if the type definition between `t` and `t'` is missing. There are now two functions:
# `is_known_subtype` when the subtyping relation can be proven
# `is_known_not_subtype` when it can be proven that there is no subtyping relation between two types
This diff is intended to make no functional changes but to add functionality to detect cast error angelically, i.e. assuming that the program is probably fine where there is not enough information to prove the cast error.
Reviewed By: jberdine
Differential Revision: D4345803
fbshipit-source-id: 39b79bc
Summary: Different analyses need different preanalyses to run. It doesn't make sense for all of the pre-analyses to be bundled together into one package.
Reviewed By: jvillard
Differential Revision: D4348243
fbshipit-source-id: 46a8ebd
Summary:
Adding #infer-capture-all et al. by hand is annoying and I always forget to do
it. Let infer figure that out.
Reviewed By: dulmarod
Differential Revision: D4339799
fbshipit-source-id: 55e52dc
Summary: reactive capture spawns clang from within analysis. Time it takes to compile source code shouldn't be counted towards timout
Reviewed By: jvillard, cristianoc
Differential Revision: D4334037
fbshipit-source-id: 64f417d
Summary:
Most of the time code outside of project root is not interesting to the user - it's either system library or infer C++ model. Skip all of them.
Previous logic was doing something similar, but in more selective way.
I also need this change for D4313428
Reviewed By: jvillard
Differential Revision: D4339298
fbshipit-source-id: c7b5544
Summary:
This will simplify the InferPrint logic of checking what should/should-not be reported.
I will remove the issue names in Localise in a next diff.
Reviewed By: ddino
Differential Revision: D4334327
fbshipit-source-id: ebcfd6c
Summary:
SuppressWarnings annotations are hardly used and add considerable
complexity due to requiring recompilation with an annotation processor.
Reviewed By: jvillard
Differential Revision: D4312193
fbshipit-source-id: c4fc07e
Summary:
This option is only useful if you want to treat casts angelically, but nothing else.
Since angelic is on by default and this option is off by default, it's basically useless.
Reviewed By: jeremydubreil
Differential Revision: D4334030
fbshipit-source-id: 3c0b0ed
Summary:
Most of the diff adds a way to run an existing test with different infer
options.
Also, do not run the Python script when capturing "analyze".
fixes https://github.com/facebook/infer/issues/518
Reviewed By: jberdine
Differential Revision: D4333762
fbshipit-source-id: 642acff
Summary:
Change the domain of SIOF to be based on sets of pvar * location instead of
single pvars. This allows us to group several accesses together. However, we
still get different trace elems for different instructions in a proc. We do two
things to get around this limitation and get a trace where all accesses within
the same proc are grouped together, instead of one trace for each access:
1. A post-processing phase at the end of the analysis of one proc collects all
the globals directly accessed in the proc into a single trace elem.
2. When creating the error trace, unpack this set into several trace elements
to see each access (at its correct location) separately in the trace.
This is a bit hacky and another way would be to extend the API of traces to
handle in-procedure accesses natively instead of shoe-horning them. However
since SIOF is the only one to use this, it introduces less boilerplate to do it
that way for now.
Also, a few .mlis for good measure.
Reviewed By: sblackshear
Differential Revision: D4299070
fbshipit-source-id: 3bbb5c2
Summary:
Turns out that swapping stdout and stderr using a temporary fd 3 was screwing
up with make's jobserver, who also uses fd 3!
Also, infer is partly to blame as it also calls `make`. Unsetting `MAKEFLAGS`
in infer tells `make` that the way infer calls `make` is independent from
parent `make` invocations.
Also, simplify the rules for direct tests and build system tests.
Reviewed By: jberdine
Differential Revision: D4328979
fbshipit-source-id: 96818e8
Summary:
We don't need to have separate `--` integration for compilation database. Instead use:
infer --compilation-db-files db.json <other_infer_options> // no -- anywhere!
Reviewed By: jberdine
Differential Revision: D4327570
fbshipit-source-id: caf0dc9
Summary: This is required to maintain a set of owned access paths in a subsequent diff.
Reviewed By: jberdine
Differential Revision: D4318859
fbshipit-source-id: bd1a9fa
Summary: Allow backend to trigger compilation of extra files when it needs them. This will allow infer to capture less files initally and possibly speed up compilation
Reviewed By: cristianoc, jberdine
Differential Revision: D4231581
fbshipit-source-id: 181abea
Summary:
This diff adds basic support for parsing the arguments passed to the
build command directly from Config.
Reviewed By: dulmarod
Differential Revision: D4201480
fbshipit-source-id: bba6056
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
Functions related to source files were already namespaced by `source_file_` prefix. Make separate module for them.
In high level it replaces all `source_file_` with `SourceFile.` and then fixes all remaining compilation errors
Reviewed By: jvillard
Differential Revision: D4299053
fbshipit-source-id: 20b1d39
Summary:
When calling function g_realloc(gpointer mem,gsize n_bytes) one of the spec considers the case
whereby n_bytes is zero. In that case g_realloc would return null.
If we call with sizeof(int), infer would compare sizeof(int) with zero. But the prover would fail to
understand that sizeof(int) != 0.
This diff fix this. We try to convert expression to constant when they can be converted (eg in case of sizeof).
The method currently make a partial set of conversion. This could be extended.
Reviewed By: jberdine
Differential Revision: D4166944
fbshipit-source-id: 3ec4fd7
Summary: When infer runs on preprocessed source, original files may not be around anymore. Don't crash infer when that happens.
Reviewed By: jvillard, jberdine
Differential Revision: D4258285
fbshipit-source-id: a19569c
Summary:
source_file_[to|from]_string were dangerous. While removing source_file_to_string is hard/impossible, source file should never be created from string.
Also include many random changes related to `source_file`:
- improve comments in DB.mli
- define behavior of changed-files-index and improve its description
- move some of the "dangerous" code inline to discourage its reuse
This mostly concludes cleanup of DB.source_file, the last bit is to unify filtering by filename (we have duplicated logic in `InferConfig`, `CLocation` and `JMain`)
Reviewed By: jvillard
Differential Revision: D4258795
fbshipit-source-id: 36735a8
Summary:
`DB.source_file_to_string` is very easy to misuse and it shouldn't even exist.
In preparation for that day, replace most of `source_file_to_string` with `source_file_pp`
Reviewed By: jvillard
Differential Revision: D4258390
fbshipit-source-id: 447cf5a
Jules Villard
Sam Blackshear
Jeremy Dubreil
Josh Berdine
Dulma Churchill
Stephan Walters
anuolu
Martino Luca
Mehdi Bouaziz
Dino Distefano
Daiva Naudziuniene
Jia Chen
Radu Grigore
Andrzej Kotulski
Don Stewart
Paco Estevez Garcia
Cristiano Calcagno
Ben Hudson
Kihong Heo
Peter O'Hearn