Summary:
The Siof checkers can now be run with:
infer -a checkers --siof -- ...
and also runs by default using:
infer -a checkers -- ...
Reviewed By: jberdine
Differential Revision: D5009731
fbshipit-source-id: e0e2168
Summary: Pass the classpath infromation from the javac command line option file to allow the dection of errors accros Buck targets
Reviewed By: sblackshear
Differential Revision: D5018329
fbshipit-source-id: cf13198
Summary:
First step to be able to enable and disable the checkers to run in the following form:
> infer -a checkers --checker1 --checker2 --checker3 -- ...
and have a predefined list of checkers that are run by default with:
> infer -a checkers -- ...
Reviewed By: sblackshear
Differential Revision: D5007377
fbshipit-source-id: d7339ef
Summary:
This gives the option to run the biabduction analysis together with the other Clang-based checkers with the command:
infer -a checkers --biabduction -- ...
The filtering does not work yet because the filtering for the biabduction analysis matches the analyzer `Infer`, and does not filter much when the analyzer is `Checkers`, which is the case here.
Reviewed By: sblackshear
Differential Revision: D4773834
fbshipit-source-id: 16300cc
Summary: Sometimes reports need traces to be fully understood, but sometimes reporting where the exception takes place can save time to developers.
Reviewed By: jvillard
Differential Revision: D4914037
fbshipit-source-id: 039ab63
Summary: This will be needed to generate man pages with an accurate date.
Reviewed By: jberdine, mbouaziz
Differential Revision: D4937498
fbshipit-source-id: b5ebd31
Summary:
We won't be needing to know the terminal size when we move the help to
manpages. Hopefully if we need C stubs again in the future we can refer back to
this diff to revive them.
Reviewed By: jberdine
Differential Revision: D4937491
fbshipit-source-id: 99139fa
Summary: This is necessary to create a `report` subcommand (see later diffs).
Reviewed By: jberdine, dulmarod
Differential Revision: D4937488
fbshipit-source-id: 3fec0b5
Summary:
As an interprocedural checker, SIOF should not run unless explicitly required.
Make it a new type of analyzer like other similar checkers.
Reviewed By: mbouaziz
Differential Revision: D4937820
fbshipit-source-id: a9e2d38
Summary:
Running `infer --help` with spacetime showed that `Str` was a hog. And indeed perf is 74% better now:
```
before:
bash -c 'for i in $(seq 100); do infer --help > /dev/null 2>/dev/null; done' 28.02s user 0.62s system 98% cpu 29.205 total
after:
bash -c 'for i in $(seq 100); do infer --help > /dev/null 2>/dev/null; done' 6.34s user 0.64s system 92% cpu 7.557 total
```
Running on many files one after the other is now 64% faster too:
```
$ cd infer/tests/codetoanalyze/c/errors
$ # before
$ rm -fr infer-out && time bash -c 'for src in */*.c; do infer -a capture --continue -- clang -c $src; done'
bash -c 7.77s user 0.66s system 97% cpu 8.647 total
$ # after
$ rm -fr infer-out && time bash -c 'for src in */*.c; do infer -a capture --continue -- clang -c $src; done'
bash -c 2.35s user 0.56s system 93% cpu 3.119 total
$ time infer -a capture -- clang -c */*.c
infer -a capture -- clang -c */*.c 0.54s user 0.20s system 99% cpu 0.737 total
```
Reviewed By: mbouaziz
Differential Revision: D4875803
fbshipit-source-id: cfcfa69
Summary:
OCaml 4.04.0 new warnings raised a few valid points!
Fixing warning 57 in two ways:
- best way: introduce an auxiliary function to avoid code duplication
- not-so-best way: introduce code duplication. I did that when the branches body are small. Typically the number of bound variables in the pattern is high, so an auxiliary function would need to take many arguments and the whole thing will not be readable (we'd still duplicate the arguments we pass to the function for instance).
Reviewed By: jberdine
Differential Revision: D4851006
fbshipit-source-id: fbf1867
Summary:
Limit the use of `SourceFile.invalid` (renamed from `SourceFile.empty`) as much
as possible. In particular, do not generate bogus procnames for external global
variables: their translation unit was set to the invalid source file, now we
distinguish between extern/non-extern global variables more explicitly.
`SourceFile.invalid` is still used in too many places to actually remove it, often as a dummy initial value that never gets used, but sometimes as an actual value... Worse, we cannot fail on all operations on `SourceFile.Invalid` yet: the `SourceFile.to_string` method is used in too many places where it could get `SourceFile.Invalid` as argument. It's easy to see where it's used by making it raise in the code, then running the tests. This results in spaghetti backtraces that are hard to trace back to a root cause.
Reviewed By: akotulski, jeremydubreil
Differential Revision: D4860019
fbshipit-source-id: 45be040
Summary:
Try to read .inferconfig in the current directory, then in .., then in ../..,
etc. This can be overriden with the `INFERCONFIG` environment variable.
This removes the need for two-phase parsing, so clean up that code too.
Paths in .inferconfig are interpreted relative to where .inferconfig is located.
This does not apply to other path-sensitive things like regexpes... this is not
a show stopper because regexpes can account for the fact that infer may be
called from different project roots.
Make sure we fail when .inferconfig exists but cannot be read.
Reviewed By: jberdine
Differential Revision: D4843142
fbshipit-source-id: 340a63f
Summary: This is required to upgrade OCaml as our ancient Reason is not available on 4.04.0.
Reviewed By: yunxing
Differential Revision: D4851582
fbshipit-source-id: 994a9a8
Summary:
- Do not print OCaml backtrace unless in developer mode.
- Print javac output when it fails.
- Refactor Javac.ml so that rerunning the command doesn't duplicate code.
The output of the clang and Javac integration is good, the output for mvn is
ok, the output for Buck is still fairly "meh".
Reviewed By: jberdine
Differential Revision: D4818722
fbshipit-source-id: 1973b93
Summary:
Currently --per-procedure-parallelism defaults to a chunk size of 1
procedure, which has a high overhead. Add a command line option to
control it, and raise the default value.
Reviewed By: jvillard
Differential Revision: D4794692
fbshipit-source-id: 7715a40
Summary:
This checker was always running by default but was apparently never reporting.
This checkers can always be run using:
infer -a checkers --checkers-repeated-calls -- ...
Reviewed By: sblackshear
Differential Revision: D4782472
fbshipit-source-id: 5ec77f4
Summary:
All tests were redirecting `stderr` into duplicates.txt which made it much harder to see other error messages in stderr (such as uncaught exceptions).
To mitigate it, write duplicates to separate file and don't redirect `stderr` to another file.
Reviewed By: jvillard
Differential Revision: D4728938
fbshipit-source-id: 8ad2fc8
Summary:
This removes the dependency of libffi, and gives better guarantees at
compile-time. A bit overkill to retrieve the width of the terminal but what do
you know...
Reviewed By: jberdine
Differential Revision: D4700003
fbshipit-source-id: 036989b
Summary:
Two issues in the previous code:
1. We'd just tack on `#compilation-database` so if there already are `#flavors`
in a Buck target then we get a malformed `#flavors#compilation-database`
instead of `#flavors,compilation-database`. There's already code to deal
with that for other flavors (`#infer-capture-all`), so extend and reuse that.
2. The code didn't work if there are spaces in target names (sigh). Harden the
code a bit so that it works. Unfortunately Buck doesn't escape spaces at all
in its `buck targets --show-output` output, so the parsing still relies on
there being no spaces in flavors to work correctly. Sample output:
```
$ buck targets --show-full-output //clang_compilation_database:Hel\ lo#compilation-database
Not using buckd because watchman isn't installed.
[+] PROCESSING BUCK FILES...0.1s [100%] 🐳 New buck daemon
//clang_compilation_database:Hel lo#compilation-database /home/jul/infer/infer/tests/build_systems/codetoanalyze/buck-out/gen/clang_compilation_database/__Hel lo#compilation-database.json
```
Also, some code in codetoanalyze/clang-compilation-database/ didn't compile, so
fix that.
Reviewed By: dulmarod
Differential Revision: D4714338
fbshipit-source-id: b8ae324
Summary:
These are mentioned on fbinfer.com so IMHO should be displayed when running infer -h
Closes https://github.com/facebook/infer/pull/617
Differential Revision: D4697682
Pulled By: jvillard
fbshipit-source-id: 3d7dd7b
Summary:
It is definitely useful to collect information about how long the analysis of every procedure takes. It allows to detect and focus on outliers when trying to improve performance. However, this kind of information could be collected using a standard logging mechanism and does not need to be stored within the analysis artifacts.
I intend to add some form of similar logging in the context of #16348004 once we can get every analysis procedure analyzed through the `Ondemand` module. In this case, it would be easy to have a single place to log how does the analysis of a procedure take.
Reviewed By: jberdine
Differential Revision: D4636755
fbshipit-source-id: 01f3bca
Summary:
This option is not needed anymore as it was introduced to counter an uncovered
perf issue with creating human readable reports. The perf issue has been
addressed.
Instead of this option, one can use `infer --report-hook /bin/true ...` to
disable reporting. However, right now the Buck integration doesn't honor it so
this would need to be fixed to be a true equivalent of `--disable-bug-list`.
Reviewed By: jberdine
Differential Revision: D4712877
fbshipit-source-id: a09304f
Summary: This is dead code, and depends on libffi which we could get rid of otherwise.
Reviewed By: jberdine
Differential Revision: D4705645
fbshipit-source-id: efd28ef
Summary:
We want to stop supporting '-multiletter' options altogether in the future as
they are not standard.
For boolean switches, we used to have '-short' for true and '-nshort' for
false, but that second form is necessarily > 1 letters, which doesn't work in
this scheme. Replace these by '-s' for true and '-S' for false.
Reviewed By: jberdine
Differential Revision: D4674079
fbshipit-source-id: 95bacfe
Summary:
Add a new command-line option `--per-procedure-parallelism`, to change the granularity of parallelism of the analysis from file to procedure.
This is intended for `--reactive` mode where e.g. a single file is changed and the analysis currently uses just one core.
When the option is used, the Makefile mechanism is replaced by using forking instead.
The parent process does as little allocation as possible, to avoid taxing the kernel.
Caveats:
- Not active in Java, (issues with camlzip).
- Not active in checkers, yet.
Example use:
```
infer --reactive --changed-files-index index.txt --per-procedure-parallelism -- analyze
```
Reviewed By: jberdine
Differential Revision: D4634884
fbshipit-source-id: e358c18
Summary:
There was a race in serialization code where a reader could try to deserialize a partially overwritten value.
Here we use a `file.lock` to synchronize the writers, while the readers are not synchronized.
The atomic `rename` is used to move `file.lock` to `file` and make it available to readers.
Since `rename` is atomic, readers should see possibly stale, but not corrupted, data.
Reviewed By: sblackshear
Differential Revision: D4689664
fbshipit-source-id: dc5b546
Summary: I noticed we don't have `T` or `S` to denote timeouts in debug mode anymore. Today I saw it's still in `--stats` mode. Bring this feature back to `--debug` as well.
Reviewed By: cristianoc
Differential Revision: D4681669
fbshipit-source-id: 16ef19b
Summary:
When parsing .inferconfig and the env var, allow all modes of infer. This
allows people to provide default values for options in .inferconfig. This
requires subcommands' options to be all distinct, but that's already the case.
Reviewed By: jberdine
Differential Revision: D4674672
fbshipit-source-id: 992b454
Summary:
Turns out that we were special-casing the `Infer Driver` case for no particular
reason and that was preventing `infer --diff --help` from working as expected.
Reviewed By: martinoluca
Differential Revision: D4666988
fbshipit-source-id: 0868d4b
Summary:
Given two analysis results, it's now possible to compare them with the following command:
infer --diff --report-current reportA.json --report-previous reportB.json --file-renamings file_renamings.json
this command will then generate 3 files in `infer-out/differential/{introduced, fixed, preexisting}.json`, whose meaning is the following:
- `introduced.json` has all issues in `current` that are not in `previous`
- `fixed.json` has all issues in `previous` that are not in `current`
- `preexisting.json` has all issues that are in both `current` and `previous`
The json files generated can then be used to categorise results coming from incremental analyses of a codebase.
Reviewed By: jvillard
Differential Revision: D4482517
fbshipit-source-id: 1f7df3e
Summary:
All intermediate `.exp` files used for tests can be generated with custom info, based on what is needed for the tests purposes.
This customisation happens via command-line argument `--issues-fields`.
Reviewed By: cristianoc, jvillard
Differential Revision: D4628062
fbshipit-source-id: feaa382
Summary:
For writes of serialized data, write directly to the file instead of using a temporary one, and lock the file before writing.
Also added an `update` function to the API, to update an existing version of the data file instead of just replacing it with a new value.
Reviewed By: jberdine
Differential Revision: D4619958
fbshipit-source-id: 9642408
Summary:
With the ondemand analysis framework, the concept of timestamp was only being use to check if a procedure has already been analyzed. There was already a concept of "active" procedure for the procedure that were already being analyzed. This revision removes the concept of timestamp and merge it with the concept of analysis status.
This can be simplified further once the analysis always goes through `Ondemand.analyze`.
Reviewed By: cristianoc
Differential Revision: D4610371
fbshipit-source-id: 0fc516b
Summary:
This gives a way for users to flag safe methods regarding SIOF, for instance if
the problematic paths in the method cannot happen before `main()` has started.
Reviewed By: akotulski
Differential Revision: D4578700
fbshipit-source-id: 6542dcf
Summary: Shorter is better. `--compilation-database` was taken, renaming it to `--buck-compilation-database`.
Reviewed By: dulmarod
Differential Revision: D4567028
fbshipit-source-id: 011cd6f
Summary:
Two options to do the same thing, one for Java and and one for clang, become
one option to do the same thing.
Reviewed By: akotulski
Differential Revision: D4578472
fbshipit-source-id: fb0f21b
Summary:
One gets very obscure errors when trying to run infer for clang when it was
compiled for Java, or vice-versa. This diff makes sure we crash early with the
appropriate error message. For instance:
```
$ ./build-infer java
$ infer -- clang -c hello.c
Uncaught exception:
(Failure
"Unsupported build mode: make/cc\
\nInfer was built with clang analyzers disabled.\
\nPlease rebuild infer with clang enabled.\
\n")
Raised at file "pervasives.ml", line 30, characters 22-33
Called from file "backend/infer.ml", line 398, characters 6-48
Called from file "backend/infer.ml", line 449, characters 20-38
$ infer --clang-compilation-db-files foo.json
Uncaught exception:
(Failure
"Unsupported build mode: clang compilation database\
\nInfer was built with clang analyzers disabled.\
\nPlease rebuild infer with clang enabled.\
\n")
Raised at file "pervasives.ml", line 30, characters 22-33
Called from file "backend/infer.ml", line 392, characters 8-65
Called from file "backend/infer.ml", line 449, characters 20-38
```
Reviewed By: sblackshear
Differential Revision: D4566641
fbshipit-source-id: d9a118f
Summary:
Sevel auxiliary files made it to the output directory of the analysis of individual targets when analyzing Java projects build with Buck. However, these files are then taken into account= to compute the target rule key and then to decide whether to analyze the dependent targets. Since these auxiliary files were containing time sentive information, every cach miss on a given target would then invalitate the cache entries for all the dependent targets.
This diff cleans up the output directory to only keep the specs files, the `global.tenv` and the `report.json` files which are the only artifacts needed to analyze the dependent targets
This diff makes a minimal number of changes to see how it behaves in prod, but I intend to refoctor this more when continuing to add support for running Infer with genrules
Reviewed By: sblackshear
Differential Revision: D4562615
fbshipit-source-id: 4628420
Summary:
Xcode's compilation databases follows a different convention than cmake's and
escape the `"file"` and `"dir"` fields of each unit to make them shell-ready.
We need to treat them differently when reading them.
This adds a new `--clang-compilation-db-files-escaped` option and makes the
code related to reading compilation databases deal correctly with both
conventions.
Reviewed By: akotulski
Differential Revision: D4559239
fbshipit-source-id: 51120ae
Summary:
This reorganises the contents of `infer --help`:
- Headings are more prominent (start with `**`)
- New "Java" section
- Delete "Analysis" section, distribute contents over other sections
- New "Quandary" section
- Under the hood, new "Buffer Overruns" and "Crashcontext" sections, but do not show them as we don't expect external use yet, although that may be a bit arbitrary
- typo: `--bufferoverrn` -> `--bufferoverrun`
- move some options from one section to another
Reviewed By: jberdine
Differential Revision: D4537500
fbshipit-source-id: a789375
Summary: Being forced to separately define `pp_element`/`pp_key` is uneccessary and makes it more cumbersome to create a set/map from an existing module that already defines `pp`.
Reviewed By: jeremydubreil
Differential Revision: D4517308
fbshipit-source-id: 9b17c9c
Summary:
Propagating the arguments read in .inferconfig shouldn't be necessary as they
are parsed by each executable. There are corner cases where I think this diff
could change the behaviour of infer (eg, .inferconfig redefines project-root
and subsequent exes read a different .inferconfig thanks to the project-root in
INFER_ARGS), but I don't think there are good use cases like that.
Reviewed By: jberdine
Differential Revision: D4475092
fbshipit-source-id: 5c020d0
Summary:
Clients should use `Config.parse_action` instead to figure in what mode they
are operating.
In particular, the biggest change is in logging. Take the `parse_action` into
account instead of the exe, and change the log/ subdirectories to be "capture",
"driver", "analyze", and "print", corresponding to the various phases of an
infer run.
Reviewed By: jberdine
Differential Revision: D4474943
fbshipit-source-id: 6d33ad3
Summary:
Support several parsing modes: Infer, Javac, NoParse
The "Infer" mode specifies a list of sections, ie the parts of infer that are affected by an option (corresponds to the old notion of "exes"):
analysis, clang frontend, print, ...
- .inferconfig and INFER_ARGS always parsed
- outside .inferconfig and INFER_ARGS, do not parse subcommand arguments before the subcommand has been activated
- command-line is parsed or not based on the subcommand/executable selected
- executable dictates subcommand, so almost nothing depends on the executable outside of Config. Another diff will restrict the API around exes to reflect this.
Reviewed By: jberdine
Differential Revision: D4474886
fbshipit-source-id: 442dfef
Summary:
Remove the remaining uses of polymorphic equality `=`.
In case of basic types, this is replaced by String.equal or Int.equal.
In case of `= []`, this is replaced by `List.is_empty`.
In case of `= None`, this is replaced by `is_none`.
In case of a datatype definition such as `type a = A | B`,
a `compare_a` function is defined by adding `type a = A | B [@deriving compare]`
and a `equal_a` function is defined as `let equal_a = [%compare.equal : a]`.
In case of comparison with a polymorphic variant `= `Yes`, the equality
defined in `PVariant.(=)` is used. Typically, `open! Pvariant` is added
at the beginning of the file to cover all the uses.
Reviewed By: jberdine
Differential Revision: D4456129
fbshipit-source-id: f31c433
Summary: Also updated the doc comment of `parse`, it had gone a bit out of sync.
Reviewed By: jberdine
Differential Revision: D4435580
fbshipit-source-id: bb1a6f2
Summary:
Epilogue tasks such as closing logs or putting files back were we found them
run automatically at the end of our executables by registering them with
`at_exit`. They do not run if the program is interrupted by a signal. This diff
makes sure they are run when the user stops infer with Ctrl-C (SIGINT).
Reviewed By: cristianoc
Differential Revision: D4435575
fbshipit-source-id: c3ab702
Summary:
This replaces the previous integration written in Python, which consisted in 1)
run the mvn command and parse its output to locate "directories containing
source files", 2) run on files named "*.java" in these directories. This meant
we had to run javac twice on each source file, and more importantly this
mechanism of finding source files was very fragile. In fact, I could not make
it work on several mvn projects I tried.
The new integration is based on parsing "pom.xml" to add an "infer-capture"
profile which instructs mvn to run `/path/to/infer` instead of `javac`. We also
add this profile to each maven submodule.
Users can specify an "infer-capture" profile themselves if the default one
doesn't work; in that case we don't inject our own "infer-capture" profile.
Reviewed By: jeremydubreil
Differential Revision: D4409613
fbshipit-source-id: d664274
Summary:
Also make sure we don't introduce deprecated options in our repo, eg when
calling infer from infer.
Reviewed By: jeremydubreil
Differential Revision: D4430379
fbshipit-source-id: 77ea7fd
Summary:
We only ever use very few of the possible `Arg.spec` constructors and,
crucially, all of them declare a function to pass argument values to. This is
needed for the next diff, which adds deprecation messages.
Reviewed By: jeremydubreil
Differential Revision: D4430217
fbshipit-source-id: c5ffe5f
Summary:
Make the html output available to checkers when -g is used on the command-line.
A checker needs to call a function to start and finish the processing of each node,
and add prints during the processing.
This diff illustrates the case for Eradicate, by adding printing of the pre-state
and post-states.
Reviewed By: sblackshear
Differential Revision: D4421379
fbshipit-source-id: 67501ba
Summary: `Toplevel` name is confusing - in ocaml world it means interactive ocaml shell (we call that "interactive"). In infer it meant "Toplevel infer binary". We already call it "driver" to avoid confusion, let's rename the code as well.
Reviewed By: jvillard
Differential Revision: D4415111
fbshipit-source-id: 1002f27
Summary:
This makes it more obvious why infer would force a path to be absolute since we
base that decision on the resolved path. For instance:
```
$ mkdir foo
$ cd foo
$ ln -s ../examples goo
$ infer -- clang -c goo/hello.c
[...]
/home/jul/infer/examples/hello.c:14: error: NULL_DEREFERENCE
```
We see that the path is outside of the current directory clearly, whereas
before infer would report on "goo/hello.c".
Reviewed By: akotulski
Differential Revision: D4409579
fbshipit-source-id: 7172005
Summary:
Currently, if we don't find `-d` or `-classes_out` on the command line then we
tell javac to redirect the compiled classes in some other directory, by default
the initial working directory. But we don't detect when these arguments are
hidden inside files (`foo` arguments on the javac command line) so the
heuristic was incomplete. Look inside these files to better tell whether we need
to make up an output directory or not.
Reviewed By: jeremydubreil
Differential Revision: D4397716
fbshipit-source-id: 30c5e4f
Summary:
Change Utils.filename_to_relative to return None in case the filename
is not under root, rather than returning the filename unchanged.
Reviewed By: akotulski
Differential Revision: D4391075
fbshipit-source-id: bf753af
Summary:
This diff allows to use the linters written in DSL to check for bugs.
Now new checkers can be written directly in the DSL.
The diff also remove some weirdness and simplify the CTL semantics.
For example no need to unwrap a node when evaluating the IN operator.
Also no need to distinguish anymore between stmt and decl in the
semantics of EX and EF.
Moreover, the diff de-couple hard-coded checkers (eg checks on component kit)
from those checkers parsed in the .al files.
Reviewed By: martinoluca
Differential Revision: D4375207
fbshipit-source-id: 9ac2d47
Summary: The logic for filtering reports based on their buckets lives in InferPrint, so this code isn't doing anything.
Reviewed By: jvillard
Differential Revision: D4379966
fbshipit-source-id: 5a69304
Summary:
Force clients to specify the path relative to which relative paths
should be made absolute.
Reviewed By: akotulski
Differential Revision: D4370262
fbshipit-source-id: 36a2807
Summary:
Now that the toplevel driver's cwd is passed through realpath, the
dance to preserve symlinks is redundant.
Reviewed By: jeremydubreil
Differential Revision: D4371055
fbshipit-source-id: c8aebaf
Summary:
For example: `infer --print-logs --stats -- clang -c hello.c`.
The option is not on by default.
This forwards all the output to log files to stdout or stderr as appropriate.
The multiplexing is very crude and can be improved later if needed if
stdout/err is too garbled by concurrent partial writes.
Reviewed By: jberdine
Differential Revision: D4365996
fbshipit-source-id: 7f2ab98
Summary:
Remove the need for a dummy initialization of log files.
The fact that we were not setting log files in some cases doesn't seem to be
relevant so I killed it. I observed no difference in output on simple clang and
javac examples. It will be easy to restore a better version of it in the next
diff if needed.
Also fix an fd leak: when opening new log files, previous ones were not being
flushed and closed (except at exit).
Reviewed By: jberdine
Differential Revision: D4365992
fbshipit-source-id: 940bc16
Summary:
Instead of opening new log files each time with non-deterministic names, keep
appending to the same log files. This only removes the randomized part of the
names in the files. In particular, it keeps the name prefixes for, eg, clang
source files.
Also changed most "<executable>/<executable>-out.log" to simply "<executable>/out.log".
Reviewed By: jberdine
Differential Revision: D4365983
fbshipit-source-id: 46792dc
Summary: This more easily allow to switch between the different modes for handeling dynamic dispatch
Reviewed By: sblackshear
Differential Revision: D4367556
fbshipit-source-id: 795d2c4
Summary: Use the lazy dynamic dispatch by default in prod for the Java analysis
Reviewed By: sblackshear
Differential Revision: D4356872
fbshipit-source-id: 491e92e
Summary: Different analyses need different preanalyses to run. It doesn't make sense for all of the pre-analyses to be bundled together into one package.
Reviewed By: jvillard
Differential Revision: D4348243
fbshipit-source-id: 46a8ebd
Summary:
Adding #infer-capture-all et al. by hand is annoying and I always forget to do
it. Let infer figure that out.
Reviewed By: dulmarod
Differential Revision: D4339799
fbshipit-source-id: 55e52dc
Summary: Access to std::vector shouldn't be treated as SKIP. Implementation is simple enough to use one from std:: headers
Reviewed By: jvillard
Differential Revision: D4339577
fbshipit-source-id: d1fbbee
Summary: pattern matching we had before allowed many unintended functions to pass (such as `max_element`). Make matching much more strict
Reviewed By: jvillard
Differential Revision: D4313428
fbshipit-source-id: 189c522
Summary:
This diff parses the build command args to directly handle the -version
option passed to java and javac, to make the integration with buck more
robust by ensuring that the version and no additional debug logging is
generated for `infer --debug -- javac -version`.
Reviewed By: jeremydubreil
Differential Revision: D4158011
fbshipit-source-id: e7d6b4d
Summary:
SuppressWarnings annotations are hardly used and add considerable
complexity due to requiring recompilation with an annotation processor.
Reviewed By: jvillard
Differential Revision: D4312193
fbshipit-source-id: c4fc07e
Summary:
This option is only useful if you want to treat casts angelically, but nothing else.
Since angelic is on by default and this option is off by default, it's basically useless.
Reviewed By: jeremydubreil
Differential Revision: D4334030
fbshipit-source-id: 3c0b0ed
Summary:
The list of argument specs is a global ref inside `CommandLineOptions`, which
need to be reset to the empty list every time `parse` is called. Otherwise, we
get duplicated sections:
```
$ infer --help
Infer version v0.9.4-84d61cb
Copyright 2009 - present Facebook. All Rights Reserved.
Toplevel options
--inferconfig-home <dir> Path to the .inferconfig file
--project-root | -pr <dir> Specify the root directory of the project (default: /home/jul/infer)
Analysis (backend) options
Clang frontend options
Java frontend options
Toplevel options
[... the rest of the options -- without --inferconfig-home or --project-root,
with all the section headers again ...]
```
Reviewed By: jberdine
Differential Revision: D4333448
fbshipit-source-id: f91ea66
Summary:
The javac -classes_out option is used to set the results directory for
the buck build system integration.
Reviewed By: jeremydubreil
Differential Revision: D4162907
fbshipit-source-id: 75d0a6d
Summary: Turns out I forgot to close the fd returned by dup(2) so we were leaking a lot.
Reviewed By: jeremydubreil
Differential Revision: D4327389
fbshipit-source-id: 74574ac
Summary:
C stubs were causing issues with building:
- need OCaml stubs of the C stubs for byte compilation!
- brittle (to remain polite) support in ocamlbuild
Ctypes is awesome, use it instead.
Slight wrinkle on the previous statement:
- ioctl(2) is variable arguments, which is not officially supported by Ctypes but should work in our use-case
- I'm hardcoding the value of a C macro found in system headers
Reviewed By: jberdine
Differential Revision: D4319507
fbshipit-source-id: 352804a
Summary:
<ugly shameful hack>
Temporarily redirect stderr to /dev/null before calling `Javalib.get_class` so
as to avoid getting spammed with "Warning: unexpected attribute: Code" messages
when parsing Java files.
</ugly shameful hack>
I suspect that now that Javalib handles Java 8 this issue is more prevalent. An
issue/PR should be sent to Javalib too so that it's fixed upstream and we can
eventually remove the hack (t15039096).
Reviewed By: jberdine
Differential Revision: D4319466
fbshipit-source-id: af855ba
Summary:
Substituting modules into Core.Std breaks the linking behavior of
module aliases, and so does including the module type of Core.Std in a
signature. So, for now, this diff exposes the broken functions in
Core's Gc, Signal, and Sys modules.
Reviewed By: cristianoc
Differential Revision: D4313140
fbshipit-source-id: d8fea00
Summary:
This diff adds basic support for parsing the arguments passed to the
build command directly from Config.
Reviewed By: dulmarod
Differential Revision: D4201480
fbshipit-source-id: bba6056
Summary:
Several Core functions silently wrap argument functions with catch-all
exception handlers that exit. This diff protects against these from
ever being used by deprecating them, which causes compilation failure if
they are used.
Reviewed By: jvillard
Differential Revision: D4271781
fbshipit-source-id: a096171
Summary:
Use In_channel and Out_channel operations instead of those in Pervasives. Don't
use physical equality on values that aren't heap-allocated since it doesn't help
the compiler generate faster code and the semantics is unspecified. Also use
phys_equal for physical equality.
Reviewed By: sblackshear
Differential Revision: D4232459
fbshipit-source-id: 36fcfa8
Summary:
Utils contains definitions intended to be in the global namespace for
all of the infer code-base, as well as pretty-printing functions, and
assorted utility functions mostly for dealing with files and processes.
This diff changes the module opened into the global namespace to
IStd (Std conflict with extlib), and moves the pretty-printing
definitions from Utils to Pp.
Reviewed By: jvillard
Differential Revision: D4232457
fbshipit-source-id: 1e070e0
Summary:
Functions related to source files were already namespaced by `source_file_` prefix. Make separate module for them.
In high level it replaces all `source_file_` with `SourceFile.` and then fixes all remaining compilation errors
Reviewed By: jvillard
Differential Revision: D4299053
fbshipit-source-id: 20b1d39
Summary: Enabling `--cxx` flag makes C++ analysis much better. It's time to turn it on by default
Reviewed By: dulmarod, jvillard
Differential Revision: D4285327
fbshipit-source-id: 261359a
Summary:
Whenever header file is in changed-files-index, it should be captured and analyzed on demand.
It was already being captured, but ondemand analysis wasn't triggered for code in header file. This diff does it.
Use hacky header->source mapping to go from header to source (cluster) and then analyze everything in that cluster (inlucing code coming from header)
Reviewed By: jberdine
Differential Revision: D4265495
fbshipit-source-id: 61606f4
Summary: When infer runs on preprocessed source, original files may not be around anymore. Don't crash infer when that happens.
Reviewed By: jvillard, jberdine
Differential Revision: D4258285
fbshipit-source-id: a19569c
Summary:
source_file_[to|from]_string were dangerous. While removing source_file_to_string is hard/impossible, source file should never be created from string.
Also include many random changes related to `source_file`:
- improve comments in DB.mli
- define behavior of changed-files-index and improve its description
- move some of the "dangerous" code inline to discourage its reuse
This mostly concludes cleanup of DB.source_file, the last bit is to unify filtering by filename (we have duplicated logic in `InferConfig`, `CLocation` and `JMain`)
Reviewed By: jvillard
Differential Revision: D4258795
fbshipit-source-id: 36735a8
Summary:
`DB.source_file_to_string` is very easy to misuse and it shouldn't even exist.
In preparation for that day, replace most of `source_file_to_string` with `source_file_pp`
Reviewed By: jvillard
Differential Revision: D4258390
fbshipit-source-id: 447cf5a
Summary:
Currently cfg nodes are written into dot files in whatever order they
appear in a hash table. This seems unnecessarily sensitive, so this
diff sorts the nodes.
Reviewed By: dulmarod
Differential Revision: D4232377
fbshipit-source-id: a907cc6
Summary: Add some basic command line API to run Infer using Buck genrules. Remains to fix issues with absolute vs relative paths and to see how to create these genrules on the fly for a given java or android library.
Reviewed By: sblackshear
Differential Revision: D4245622
fbshipit-source-id: 1cda4ee
Summary:
Clean up code related to --changed-files-index option:
1. Store DB.SourceFileSet.t in DB.changed_source_files_set
2. Refactor rest of the code to use it
3. Bunch of minor changes to make code more consise
Reviewed By: jberdine
Differential Revision: D4238736
fbshipit-source-id: 51e5684
Summary:
Dealing with symbolic links in project root is tricky. To avoid it, always normalize all paths to sources with `realpath`.
Changes to tests are expected - infer started to resolve symbolic links which screws up with our testing mechanism.
Reviewed By: jberdine
Differential Revision: D4237587
fbshipit-source-id: fe1cb01
Summary:
Implement heuristics to get from corresponding source files for header files.
We already had initial implementation for CaptureCompilationDatabase - moved it and extended it
to handle C/C++/objC/objC++
Reviewed By: jberdine
Differential Revision: D4231864
fbshipit-source-id: 4516287
Summary: Make backend know filenames of compilation database. It will allow it to compile extra files when needed
Reviewed By: cristianoc
Differential Revision: D4231521
fbshipit-source-id: c462448
Summary:
`abs_source_file_from_path` is dangerous because
1. It's not trying to make path relative to `project_root` - you can't compare two files created with two different methods
2. It's making relative paths relative to `getcwd` instead of `project_root` which is different from `from_string` function.
Also remove unused `DB.inode_equal`
Reviewed By: cristianoc
Differential Revision: D4204891
fbshipit-source-id: c4c2f99
Summary:
1. Always store cpp model source_file with relative path. This will make them cache friendly independent of infer location
2. Distinguish between "relative to project root" and "relative to infer models src"
3. Unify `source_file_from_path` used by java and C frontends into one function. There are no improvements to that logic yet
4. Move `is_cpp_model_file` to use `source_file` instead of `filename`
Reviewed By: jberdine
Differential Revision: D4204548
fbshipit-source-id: 6e21771
Summary: This option is unused and it's making DB.source_file_* API harder to simplify
Reviewed By: cristianoc
Differential Revision: D4219803
fbshipit-source-id: 23ce697
Summary:
This diff adds a dependency on ctypes.foreign and uses the example
binding of fts to implement remove_directory_tree.
Reviewed By: yunxing
Differential Revision: D4115569
fbshipit-source-id: 3509955
Summary:
This diff implements enough of the functionality in the python code in
the OCaml toplevel driver that executing `infer -- analyze` is done
with direct procedure calls instead of forking the python interpreter.
Except for some reporting code that remains in report.py.
Reviewed By: jvillard
Differential Revision: D4074718
fbshipit-source-id: 56a794d
Summary:
Record an abstraction of the bug traces in the tests. The abstraction of a
trace is the sequence of descriptions. In practice, descriptions are either
empty, or of the form "start/end/return from/call to procedure X". They seem
pretty stable.
Motivation: there is nothing testing the traces reported by Infer right now,
even though they are surfaced to developers. For instance, Quandary uses
--issues-txt instead of --issues-tests to make sure the traces do not regress.
This change would make this approach more widespread.
Reviewed By: sblackshear
Differential Revision: D4159597
fbshipit-source-id: 9c83952
Summary: clang has very complicated logic what to translate based on `project_root` and filename. Add tests for different situations in regard of symbolic links in path/project_root
Reviewed By: jvillard
Differential Revision: D4168551
fbshipit-source-id: 586b364
Summary: The thread safety checker is run independently of other analyses, using the command "infer -a threadsafety -- <build-command>".
Reviewed By: sblackshear
Differential Revision: D4148553
fbshipit-source-id: bc7b3f9
Summary: Speed up capture on MacOS by caching results of realpath. Improvements to lint speed on MacOS will be sent later
Reviewed By: jvillard
Differential Revision: D4166902
fbshipit-source-id: 4d065bc
Summary:
In some error conditions, it could happen that the log file directory
was created early in execution, and then deleted, causing the creation
of log files to then fail.
Reviewed By: sblackshear
Differential Revision: D4157986
fbshipit-source-id: 1548b08
Summary:
Only the python code passes --models, always does so, and only ever
passes Config.models_jar.
Reviewed By: jeremydubreil
Differential Revision: D4151094
fbshipit-source-id: 8f21c03
Summary: Also use the executable as a default name prefix.
Reviewed By: akotulski, jvillard
Differential Revision: D4135539
fbshipit-source-id: 84ba011
Summary:
Location.nLOC was introducing a lot of complexity for little benefit (and edge cases were wrong anyway).
We can restore it in some simplified way if we find that we need it
Reviewed By: jeremydubreil
Differential Revision: D4139868
fbshipit-source-id: 4f8e033
Summary:
Fix potential performance problems in `CLocation` module
1. Don't call `Unix.stat` to compare files if it's enough to compare paths
2. Use C implementation of `realpath` and call it only when it's really necessary
This diff breaks `Location.nLOC` information for whole clang frontend, but it's going away soon anyway
Reviewed By: jvillard, jberdine
Differential Revision: D4132526
fbshipit-source-id: f01afe8
Summary:
This will be useful to migrate the existing tests to using report.json to
output the list of bugs found by Infer. This will make the tests reflect what
happens in prod more faithfully: right now running with --issues-tests does its
own filtering starting from the specs.
Moreover, this will allow --issues-tests to support the Buck integration, where
the specs/ directory is not populated after a run (although I suppose we could
also copy them from buck-out/ for InferPrint's benefit).
Reviewed By: jeremydubreil
Differential Revision: D4130851
fbshipit-source-id: 0457fba
Summary:
If the project root contains ".." then it doesn't work as expected, eg
infer --project-root .. -- clang hello.c
doesn't report at all. Now it works.
Reviewed By: jeremydubreil
Differential Revision: D4125489
fbshipit-source-id: 06b10ad
Summary:
This diff moves the implementation that considers the default value of
--models to be Config.models_jar if it exists from analyze.py to ZipLib.
Reviewed By: cristianoc
Differential Revision: D4100421
fbshipit-source-id: 322fbcf
Summary:
This diff unifies the --specs-library and --zip-specs-library options,
delaying the point where their relative order gets lost to at least
after option parsing. This also moves the treatment of non-cached jar
libraries from Config to where they are used in ZipLib. The
implementation of expanding the cached jars is slightly simplified and
untangled from option parsing.
Reviewed By: jvillard
Differential Revision: D4100015
fbshipit-source-id: cf840a7
Summary:
Now that it's possible to run clang wrapper as a function from another process,
Logging module cannot rely on `Config.current_exe` to determine which directory
it should write to.
Reviewed By: jeremydubreil
Differential Revision: D4095455
fbshipit-source-id: d989b06
Summary:
Change command line options for dynamic dispatch to capture that the
alternatives are mutually exclusive.
Reviewed By: jeremydubreil
Differential Revision: D4074540
fbshipit-source-id: c329717
Summary: The lazy dynamic dispatch algorithm works by re-analyzing the generic methods with the more specialized types encountered during the symbolic execution. In order to do that, the analysis must access the procedure description of the method to reanalyze in order to run the analysis of the specialized procedure description on demand. This diff adds the procedure description on the summary as the summary are stored in the Buck cache and can easily be retrieved by procname.
Reviewed By: sblackshear
Differential Revision: D4077415
fbshipit-source-id: c2f1cc8
Summary: For some reason, the frontend was always caching the name of the translated classes even when the `--dependencies` was not passed
Reviewed By: jberdine
Differential Revision: D4074225
fbshipit-source-id: 8aa2c79
Summary:
Merging the results directories of targets on buck projects involved creating symbolic links into buck-out.
The bulk of files are .attr files: one per procedure. Creating these links can be a bottleneck, and the merge phase can be slower than the analysis phases on projects with many procedures.
This diff introduces multilinks to speed up merge.
A multilink is a file `multilink.txt` containing a sequence of paths
```
path/to/file1.ext
path/to/file2.ext
...
```
A multilink file is a compact way to represent a link for each entry.
This diff creates a multilink file for each `attributes/dir` directory, instead of one symbolic link for each file.
Reviewed By: jberdine
Differential Revision: D4067428
fbshipit-source-id: 911f8a9
Summary: Fix the resolution of symbolic links. The previous version did not work if the path itself was not a symbolic link, but there was a symbolic link somewhere up in the path tree. For example: `path/to/file` where `file` is not a symbolic link, but `to` is a symbolic link.
Reviewed By: jberdine
Differential Revision: D4062947
fbshipit-source-id: 394221d
Summary: This code is an old experiement and has never really be used in prod because it was creating false positive. Dealing static final fields should be done in the backend instead so that it can used by the different languages C, Objective C, C++ and Java.
Reviewed By: jberdine
Differential Revision: D4055292
fbshipit-source-id: f1dc715
Summary:
Config.analyze_models, set by the INFER_ANALYZE_MODELS environment
variable, is redundant with Config.models_mode.
Reviewed By: jvillard
Differential Revision: D4047338
fbshipit-source-id: 4522d65
Summary:
Also be more careful when escaping arguments and create a module for shared
functionality between the clang frontend and the buck compilation database.
Reviewed By: jberdine
Differential Revision: D4036627
fbshipit-source-id: c981184
Summary:
Fix an issue where, when `-reactive` mode is used, files captured in the first second are not considered modified, and are not analyzed. This happens because file timestamps are used, and the resolution is one second.
Change the front-ends to change the timestamp of the directory where artifacts are created, so that the timestamps are 1 second in the future.
Small reactive commands such as the following now analyze correctly:
rm -rf infer-out && infer --reactive -- clang -c test.c
Reviewed By: jberdine
Differential Revision: D4050689
fbshipit-source-id: 6271860
Summary:
The integration would not work if other arguments were passed to Buck via infer
using Xbuck.
Reviewed By: akotulski
Differential Revision: D4044371
fbshipit-source-id: 742b5b3
Summary: failing to resolve was making the Java analysis to report errors with absolute paths instead of relative paths.
Reviewed By: sblackshear
Differential Revision: D4032764
fbshipit-source-id: e316193
Summary:
This also adds `-a compile` support to `InferClang`. This is needed for the
`xcodebuild` integration, which is hard to fold into the same binary as the
rest.
Reviewed By: jberdine
Differential Revision: D4008262
fbshipit-source-id: 0bbd53f
Summary:
Create dummy functions representing the initializers of global variables. This
is so we can implement checks in the backend that can look at the initializer
expressions of global variables. We try not to create these dummy functions
when the initializer is not present, although for some reason we sometimes end
up with empty initializers.
Also add source file info to global variables in the backend (Pvar.re).
Reviewed By: sblackshear
Differential Revision: D3780238
fbshipit-source-id: 2dca87e
Summary:
There's no reason for infer to be in lib/ anymore, move it to the same place as
the other binaries. Thus all binaries are in the same directory and Config.ml
can better know where things are.
Reviewed By: jberdine
Differential Revision: D4015958
fbshipit-source-id: c5e851f
Summary: `tput cols` spams the terminal when it finds `$TERM` confusing. Reimplement what we need, which is very little, in C.
Reviewed By: jberdine
Differential Revision: D3960620
fbshipit-source-id: afe357e
Summary: when a method has writes to a field outside of synchrnoization, issue an appropriate error message identifying the fields
Reviewed By: sblackshear
Differential Revision: D4015612
fbshipit-source-id: 4f697fc
Summary:
During the development/debugging of AST checks, it will be possible to emit dotty graphs with a representation of the evaluation of formulas.
The formulas, expressed using the notation of CTL (https://en.wikipedia.org/wiki/Computation_tree_logic) are represented in a graph alongside the current ast-node and their final evaluation result (green for true, red for false)
To get the dotty graph, run infer with the `--debug` flag
Reviewed By: ddino
Differential Revision: D3937787
fbshipit-source-id: 163e17d
Summary: Avoid polluting stdout and stderr for executables that are always supposed to log into files.
Reviewed By: dulmarod
Differential Revision: D4008888
fbshipit-source-id: 1366498
Summary:
This changes executions of the former InferClang into a function call. In
particular, it can be called several times per execution.
The new InferClang must be called as if it was clang, and knows how to run
clang with our plugin to get the AST of the source file.
Reviewed By: akotulski
Differential Revision: D3981017
fbshipit-source-id: 7af6490
Summary:
This diff removes the unused support for reporting props, which enables
refactoring so that the 'base' directory has no dependencies, and the
'IR' directory depends only on 'base'.
Reviewed By: jvillard
Differential Revision: D3981352
fbshipit-source-id: 3700a23
Summary:
This changes the algorithm for pure join to keep the constraints that,
after normalization, occur in both arguments. Previously pure join
would normalize, filter, and then union the constraints of the
arguments.
Reviewed By: sblackshear
Differential Revision: D3970394
fbshipit-source-id: 3dc1672
Summary:
This is needed for later: InferClang will no longer be started once for each
source file to be analysed. Instead, it will be called to analyse several files
at once, and will analyse them one by one. Thus, `clang_lang` and `source_file`
are moved to `cFrontend_config` as references.
The biggest change this entailed was the new logging infrastructure, which was
depending on `Config.source_file`. This diff moves the logic entirely to
`Logging`, and changes the API so that executables wishing to log into files
have to set it up using `Logging.set_log_file_identifier`. This can be called
several times during the execution, allowing to dynamically change the log file
(eg, when analysing several source files one by one!).
Reviewed By: jberdine
Differential Revision: D3944148
fbshipit-source-id: 6129090
Summary:
Let's start migrating some of our bash script to OCaml to make them easier to
maintain and extend.
For now replace just one script and put it in lib/clang_wrappers/ at compile
time, where the former script used to be. Further simplifications will come
later.
Reviewed By: jberdine
Differential Revision: D3929988
fbshipit-source-id: b2d8b37
Summary:
Move most of common dependencies out of backend/ into base/
Diff doesn't change any code and hence files in base/ may still depend on
code outside of base/. There will be followup diff cleaning those up.
There are also files that maybe should be in common/ but haven't been moved there yet.
Reviewed By: jberdine
Differential Revision: D3950695
fbshipit-source-id: 00612b1
Jeremy Dubreil
Sam Blackshear
Martino Luca
Dulma Churchill
Jules Villard
Andrzej Kotulski
Josh Berdine
Matthew Haughton
Cristiano Calcagno
Kihong Heo
Dino Distefano
Ryan Rhee
Peter O'Hearn