Summary:
When a C++ temporary goes out of scope, tag its address in the heap with
a new attribute `AddressOfCppTemporary` so that we can later check that
we don't return it.
Reviewed By: da319
Differential Revision: D13466898
fbshipit-source-id: 8808338b4
Summary:
When assign to the special `return` variable, check that the result is
not the address of a local variable, otherwise report.
Reviewed By: ngorogiannis
Differential Revision: D13466896
fbshipit-source-id: 465da7f13
Summary: Naming it `FP_` was a mistake in the original commit that copied the tests over as pulse has never reported on that method.
Reviewed By: da319
Differential Revision: D13465324
fbshipit-source-id: f8b24ebda
Summary:
In order to avoid FPs due to lack of relational info, we apply a heuristic: proof obligations has a latest pruned values,
then it is instantiated at Call statements. If there is a bottom value in the instantiated pruned values, we can say the
program point where the proof obligation is introduced is unreachable with the given parameters of the function.
Depends on D13414441
Reviewed By: mbouaziz
Differential Revision: D13414483
fbshipit-source-id: 61bd34ebb
Summary:
It's ok to take an address of a field / array access of an invalid object.
This diff calculates the inner most dereference for an access expression starting with `&` and does not report on the dereference even if the address is invalid.
Reviewed By: jvillard
Differential Revision: D13450758
fbshipit-source-id: 18c038701
Summary:
When we create Dereference edge, we also create TakeAddress back edge. This causes false positives for stack variables. When we write to a stack variable and then take its address, the resulting address is the one from the back edge of the written value. See example `push_back_value_ok`. To solve this issue, this diff changes stack to denote a map from address of variables rather than from variables.
We still have issue for fields, see example, FP_push_back_value_field_ok. To solve this, we probably need to remove back edges.
Reviewed By: jvillard
Differential Revision: D13432415
fbshipit-source-id: 9254a1a6d
Summary: Mostly a revert of D13190876 once the disjunctive domain is in place.
Reviewed By: da319
Differential Revision: D13432488
fbshipit-source-id: f1e98ef0d
Summary:
Change join/widen policies to more interesting ones and play around to
find a good tradeoff.
Reviewed By: mbouaziz
Differential Revision: D13432492
fbshipit-source-id: 2c3e498dd
Summary:
Introduce machinery to do disjunctive HIL domains and use it for pulse,
but only in a mode that preserves the existing behaviour.
The disjunctive domain is a functor that turns any (HIL for now)
transfer function module into one operating on sets of elements of the
original domain. The behaviour of joins (and widenings, which are equal
to joins) can be chosen when instantiating the functor among 3
behaviours:
- `` `JoinAfter n`: when the set of disjuncts gets bigger than `n` the
underlying domain's join is called to collapse them into one state
- `` `UnderApproximateAfter n`: when the sest of disjuncts gets bigger
than `n` then just stop adding new states to it, drop any further states
on the floor. This corresponds to an under-approximation/bounded
approach.
- `` `NeverJoin`
The widening is always of the form ``
`UnderApproximateAfterNumIterations max_iter` for now since the only
user is pulse and I'm not sure what else would be useful.
Picking `` `JoinAfter 0` gives the same results as the non-disjunctive
domain since the underlying `join` will always be called. Make pulse use
this mode for now, and tune it in a next diff.
Reviewed By: mbouaziz
Differential Revision: D13431375
fbshipit-source-id: b93aa50e7
Summary:
This will be useful to make the analysis more precise. In particular, it
allows a disjunctive version of pulse to deal will deleting vector
elements in a loop: without this, deleting an array element in one
iteration will make the analysis think that the next array element is
invalid too since they are all the same. By keep track of the index, we
can detect when we are sure that two elements are the same and only
report in that case.
Reviewed By: ngorogiannis
Differential Revision: D13431374
fbshipit-source-id: dae82deeb
Summary:
A lot of functors that take a `Make{SIL,HIL}` can take a `{SIL,HIL}`
directly instead. This makes my head hurt a bit less.
Reviewed By: mbouaziz
Differential Revision: D13416967
fbshipit-source-id: eb0b33bc4
Summary:
When a lambda gets created, record the abstract addresses it captures, then
complain if we see some of them be invalidated before it is called.
Add a notion of "allocator" for reporting better messages. The messages are
still a bit sucky, will need to improve them more generally at some point.
```
jul lambda ~ infer 1 infer -g --pulse-only -- clang -std=c++11 -c infer/tests/codetoanalyze/cpp/pulse/closures.cpp
Logs in /home/jul/infer.fb/infer-out/logs
Capturing in make/cc mode...
Found 1 source file to analyze in /home/jul/infer.fb/infer-out
Found 2 issues
infer/tests/codetoanalyze/cpp/pulse/closures.cpp:21: error: USE_AFTER_DESTRUCTOR
`&(f)` accesses address `s` captured by `&(f)` as `s` invalidated by destructor call `S_~S(s)` at line 20, column 3 past its lifetime (debug: 5).
19. f = [&s] { return s.f; };
20. } // destructor for s called here
21. > return f(); // s used here
22. }
23.
infer/tests/codetoanalyze/cpp/pulse/closures.cpp:30: error: USE_AFTER_DESTRUCTOR
`&(f)` accesses address `s` captured by `&(f)` as `s` invalidated by destructor call `S_~S(s)` at line 29, column 3 past its lifetime (debug: 8).
28. f = [&] { return s.f; };
29. }
30. > return f();
31. }
32.
Summary of the reports
USE_AFTER_DESTRUCTOR: 2
```
Reviewed By: da319
Differential Revision: D13400074
fbshipit-source-id: 3c68ff4ea
Summary: Model more `std::vector` functions that can potentially invalidate references to vector's elements (https://en.cppreference.com/w/cpp/container/vector).
Reviewed By: mbouaziz
Differential Revision: D13399161
fbshipit-source-id: 95cf2cae6
Summary:
Some code calls `this->~Obj()` then proceeds to use fields in the current
object, which previously we would report as invalid uses. Assume people know
what they are doing and ignore destructor calls to `this`.
Reviewed By: mbouaziz
Differential Revision: D13401145
fbshipit-source-id: f6b0fb6ec
Summary:
`AccessExpression.t` represents array accesses as `ArrayOffset of t * Typ.t * t
list`, i.e. the index is represented by a list of access expressions. This is
not precise enough when indices cannot be represented as such. In fact, in
general any `HilExp.t` can be an array index but this type was an approximation
that was good enough for existing checkers based on HIL.
This diff changes the type of access expressions to be parametric in the type
of array offsets, and uses this to record `HilExp.t` into them when translating
from SIL to HIL.
To accomodate the option of not caring about array offsets
(`include_array_indexes=false`), the type of array offsets is an option type.
Reviewed By: mbouaziz
Differential Revision: D13360944
fbshipit-source-id: b01442459
Summary:
`AccessExpression.t` and `HilExp.t` are about to become mutually
recursive, this will help distinguish the actual changes from the moving
of code around.
This deletes the file left around in the previous commit to preserve
callers of `AccessExpression`.
Reviewed By: mbouaziz
Differential Revision: D13377645
fbshipit-source-id: 71338d1f3
Summary:
`AccessExpression.t` and `HilExp.t` are about to become mutually
recursive, this will help distinguish the actual changes from the moving
of code around.
Reviewed By: mbouaziz
Differential Revision: D13377644
fbshipit-source-id: 9d6f290b6
Summary:
This will be useful for proper support of array indexes in pulse and in
HIL in general.
Reviewed By: mbouaziz
Differential Revision: D13377642
fbshipit-source-id: e431121fb
Summary: It weakly updates array when there are more than two contents.
Reviewed By: mbouaziz
Differential Revision: D13318443
fbshipit-source-id: fa740d8b1
Summary:
It materializes symbolic values of function parameters on-demand. The on-demand materialization is triggered when finding a value from an abstract memory and joining/widening abstract memories.
Depends on D13294630
Main idea:
* Symbolic values are on-demand-ly generated by a symbol path and its type
* In order to avoid infinite generation of symbolic values, symbol paths are canonicalized by structure types and field names (which means they are abstracted to the same value). For example, in a linked list, a symbolic value `x->next->next` is canonicalized to `x->next` when the structures (`*x` and `*x->next`) have the same structure type and the same field name (`next`).
Changes from the previous code:
* `Symbol.t` does not include `id` and `pname` for distinguishing symbols. Now, all symbols are compared by `path:SymbolPath.partial` and `bound_end`.
* `SymbolTable` is no longer used, which was used for generating symbolic values with new `id`s.
Reviewed By: mbouaziz
Differential Revision: D13294635
fbshipit-source-id: fa422f084
Summary:
`eval_locs` is like `eval |> get_all_locs` but avoids computing things that aren't necessary.
The goal was not to be an optimization but is needed for Java where array blocks don't have offsets.
Reviewed By: skcho
Differential Revision: D13190939
fbshipit-source-id: 1cc0e6338
Summary: Similarly as `std::vector::push_back`, `std::vector::reserve` can invalidate the references to elements if the new size is bigger than the existing one. More info on `std::vector::reserve`: https://en.cppreference.com/w/cpp/container/vector/reserve
Reviewed By: jvillard
Differential Revision: D13340324
fbshipit-source-id: bf99b6923
Summary: Moving all the files related to nullable type checking under the same directory. The goal is to merge everything into the same backend based on the AI framework and access expressions.
Reviewed By: ngorogiannis
Differential Revision: D13350880
fbshipit-source-id: 8ab3cf81b
Summary: Instead of variable having the value of a single location on stack, we now allow variables to have multiple locations. Consequently, we also allow a memory location to point to a set of locations in the heap. We enforce a limit on a maximum number of locations in a set (currently 5).
Reviewed By: jvillard
Differential Revision: D13190876
fbshipit-source-id: 5cb5ba9a6
Summary:
At function calls, it copies callee's values that are reachable from parameters.
Depends on D13231291
Reviewed By: mbouaziz
Differential Revision: D13231711
fbshipit-source-id: 1e8aed1c4
Summary: It instantiates not only symbols for bound but also symbols for locations at function calls.
Reviewed By: mbouaziz
Differential Revision: D13231291
fbshipit-source-id: ce23a943b
Summary: Recent improvements in join fixed `FP_allocate_in_branch_ok` because the variable was not read after the join.
Reviewed By: mbouaziz
Differential Revision: D13233441
fbshipit-source-id: 89b701e12
Summary:
It adds symbolic locations for paramters, which will be used for fixing instantiations of parameters in the
following diffs.
Reviewed By: mbouaziz, jvillard
Differential Revision: D13214293
fbshipit-source-id: f016ea4c3
Summary: Delete function that would get a linter warning or not depending on the version of Xcode.
Reviewed By: martintrojer
Differential Revision: D13215750
fbshipit-source-id: 886ce397d
Summary: It is not used yet and still manages to cause false positives.
Reviewed By: mbouaziz
Differential Revision: D13102948
fbshipit-source-id: 2122666c2
Summary:
It's useful for checkers to know when variables go out of scope to
perform garbage collection in their domains, especially for complex
domains with non-trivial joins. This makes the analyses more precise at
little cost.
This could have been added as a custom function call to a builtin, but I
decided against it because this instruction doesn't have the semantics
of any function call. It's better for each checker to explicitly not
deal with the custom instruction instead.
Reviewed By: jberdine
Differential Revision: D13102951
fbshipit-source-id: 33be22fab
Summary:
Before, the liveness pre-analysis would place extra instructions in the
CFG for either:
1. marking an `Ident.t` as dead, or
2. marking a `Pvar.t` as `= 0`
But we have no way of marking pvars dead without setting them to 0. This
is bad because setting pvars to 0 is not possible everywhere they are
dead. Indeed, we only do it when we haven't seen their address being
taken anyway. This prevents the following situation, recorded in our tests:
```
int address_taken() {
int** x;
int* y;
int i = 7;
y = &i;
x = &y;
// if we don't reason about taken addresses while adding nullify instructions,
// we'll add
// `nullify(y)` here and report a false NPE on the next line
return **x;
}
```
So we want to mark pvars as dead without nullifying them. This diff
extends the `Remove_temps` SIL instruction to accept pvars as well, and
so renames it to `ExitScope`.
Reviewed By: da319
Differential Revision: D13102953
fbshipit-source-id: aa7f03a52
Summary:
Switches from opam 1 to opam 2.
Opam2 has some cool new features that simplify some of the scripting.
Notable changes:
1. Use the new `opam lock` *plugin* from https://github.com/AltGr/opam-lock/ instead of https://github.com/rgrinberg/opam-lock. This has a simpler interface for our purposes.
2. Change the way `./build-infer.sh` can be called to use an already existing switch: simply pass `--user-opam-switch` to the script and it won't attempt to create/set the current switch. This can be used to build infer in a local switch for instance.
3. Take advantage of automatic pinning where possible, eg to install infer deps without using opam.locked.
Reviewed By: ngorogiannis
Differential Revision: D13167863
fbshipit-source-id: 1a667c270
Summary:
It removes the `represents_multiple_values` parameters when we can know them from `path` values.
Depends on D12939124
Reviewed By: skcho
Differential Revision: D12939130
fbshipit-source-id: 30ff768b2
Summary:
It modifies sizes and offsets of array values on pointer castings.
Currently, it supports only simple castings of pointer-to-integers.
Reviewed By: mbouaziz
Differential Revision: D12920589
fbshipit-source-id: a5ba831b8
Summary: In this diff, it passes the parameter of integer type widths to evaluation functions. The parameter which will be used for casting in the following diff.
Reviewed By: mbouaziz
Differential Revision: D12920581
fbshipit-source-id: 48bbc802b
Summary:
It enables the translation of casting expression. As of now, it
translates only the castings of pointers to integer types, in order to
avoid too much of change, which may mess the checkers up.
Reviewed By: jvillard
Differential Revision: D12920568
fbshipit-source-id: a5489df24
Summary:
Useful to understand the changes in the pre-analysis, or to inspect the
CFG that checkers actually get.
This means that the pre-analysis always runs when we output the dotty,
but I don't really see a reason why not. In fact, we could probably
*always* store the CFGs as pre-analysed.
Reviewed By: mbouaziz
Differential Revision: D13102952
fbshipit-source-id: 89f3102ec
Summary: It fixes the conditions of the `check` function to address `is_collection_add` cases correctly.
Reviewed By: mbouaziz
Differential Revision: D13081281
fbshipit-source-id: 39ae5ef03
Summary: Experimental feature: Use memcached for summaries as a look-aside cache during analysis.
Reviewed By: jvillard
Differential Revision: D12939311
fbshipit-source-id: 9f78994e2
Summary:
Currently, if there are several reports on the same line, the most important one is reported together with a message containing how many reports were suppressed.
This is sometimes causing the bug hash we use believe that a report is introduced (eg if the number of suppressed reports changes).
Reviewed By: mbouaziz
Differential Revision: D13067306
fbshipit-source-id: 1cc0c6d3a
Summary:
Messages emitted by cost-analysis now look like the following:
Complexity of this function has **increased** from `O(1)` to `O(n)`.
Reviewed By: mbouaziz
Differential Revision: D13058008
fbshipit-source-id: 119037703
Summary:
Update clang plugin which now gives names to variables captured by lambdas that were empty before.
update-submodule: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D12979015
fbshipit-source-id: 0b092fb24
Summary:
It turns out keeping attributes (such as invalidation facts) separate
from the memory is a bad idea and leads to loss of precision and false
positives, as seen in the new test (which previously generated a
report).
Allow me to illustrate on this example, which is a stylised version of
the issue in the added test: previously we'd have:
```
state1 = { x = 1; invalids={} }
state2 = { x = 2; invalids ={1} }
join(state1, state2) = { x = {1, 2}; invalids={{1, 2}} }
```
So even though none of the states said that `x` pointed to an invalid
location, the join state says it does because `1` and `2` have been
glommed together. The fact `x=1` from `state1` and the fact "1 is
invalid" from `state2` conspire together and `x` is now invalid even
though it shouldn't.
Instead, if we record attributes as part of the memory we get that `x`
is still valid after the join:
```
state1 = { x = (1, {}) }
state2 = { x = (2, {}) }
join(state1, state2) = { x = ({1, 2}, {}) }
```
Reviewed By: mbouaziz
Differential Revision: D12958130
fbshipit-source-id: 53dc81cc7
Summary:
I hear that this scheduler is better. I want the best scheduler
possible. Also pulse's join is a bit complex so it might matter one day.
whydididothis
Reviewed By: mbouaziz
Differential Revision: D12958131
fbshipit-source-id: 3bd77ccba
Summary: There is a bug on the instantiation of function parameters.
Reviewed By: mbouaziz
Differential Revision: D12973691
fbshipit-source-id: ca7fbc4e6
Summary: The aligned width of bool should be 1-byte, while the range of bool [0,1].
Reviewed By: jvillard
Differential Revision: D12932394
fbshipit-source-id: be1a5d6d1
Summary: For a general case of `operator=` we want to create a fresh location for the first parameter as `operator=` behaves as copy assignment.
Reviewed By: jvillard
Differential Revision: D12940635
fbshipit-source-id: 89c6e530d
Summary:
Whenever `vec.reserve(n)` is called, remember that the vector is
"reserved". When doing `vec.push_back(x)` on a reserved vector, assume
enough size has been reserved in advance and do not invalidate the
underlying array.
This gets rid of false positives.
Reviewed By: mbouaziz
Differential Revision: D12939837
fbshipit-source-id: ce6354fc5
Summary:
Instead of keeping at most one invalidation fact for each address, keep
a set of them and call them "attributes". Keeping a set of invalidation
facts is redundant since we always only want the smallest one, but
makes the implementation simpler, especially once we add more kinds of
attributes (used for modelling, see next diffs).
Reviewed By: mbouaziz
Differential Revision: D12939839
fbshipit-source-id: 4a54c2132
Summary:
Copied on the ownership checker logic: return the initial value of the
domain as return. This can probably be improved.
Reviewed By: mbouaziz
Differential Revision: D12888102
fbshipit-source-id: 9e2dac7fc
Summary:
When initialising a variable via semi-exotic means, the frontend loses
the information that the variable was initialised. For instance, it
translates:
```
struct Foo { int i; };
...
Foo s = {42};
```
as:
```
s.i := 42
```
This can be confusing for backends that need to know that `s` actually
got initialised, eg pulse.
The solution implemented here is to insert of dummy call to
`__variable_initiazition`:
```
__variable_initialization(&s);
s.i := 42;
```
Then checkers can recognise that this builtin function does what its
name says.
Reviewed By: mbouaziz
Differential Revision: D12887122
fbshipit-source-id: 6e7214438
Summary:
Now that arrays are dealt with separately (see previous diff), we can
turn the join back into an over-approximation as far as invalid
locations are concerned.
Reviewed By: skcho
Differential Revision: D12881989
fbshipit-source-id: fd85e49c0
Summary:
Arrays are the main source of false positives that prevent us from
having a better (less under-approximate) join in general. The next diff
improves join and I split this off to make it easier to review.
Reviewed By: mbouaziz
Differential Revision: D12881986
fbshipit-source-id: 5f52dea27
Summary:
This prevents the join from wrongly assuming that we haven't seen a
variable on one side of the join.
Reviewed By: skcho
Differential Revision: D12881987
fbshipit-source-id: 42a776adb
Summary:
Smaller numbers are easier to read and abstract addresses should never
be shared across functions anyway.
Reviewed By: da319
Differential Revision: D12881988
fbshipit-source-id: f9bcfa343
Summary:
As explained in the added comment, clang started adding `-faddrsig` at the end
of every `-cc1` command, which trumps our heuristic for finding the file name
(thus we would write debug scripts to `-faddrsig.ast.sh`, do filename-based
filtering on `-faddrsig` instead of the source path, and more...). We rely on
the file name being the last argument in `-cc1` commands because so far that's
always been the case, and we don't want to parse the clang command line and
have to know about all the clang options...
Thanks martinoluca for the trick of simply passing `-fno-addrsig`!
Reviewed By: martinoluca
Differential Revision: D12921987
fbshipit-source-id: 28bebe647
Summary:
The upcoming ocamlformat has the ability to parse and format
docstrings. This requires that the docstrings conform to the ocamldoc
spec a bit more strongly. If a docstring does not parse, it is left
alone, but if it is morally ill-formed but parses by chance, it can be
reformatted incorrectly. This patch fixes the existing instances of
this problem.
Reviewed By: mbouaziz
Differential Revision: D12911937
fbshipit-source-id: 1c2eb590b
Summary:
For more deduplications of issues, this diff loosens the condition of
similar bounds. The previous condition of similar bounds was too
strict, so [0,0] and [0,+oo] were not similar.
Depends on D10851762
Reviewed By: mbouaziz
Differential Revision: D10866127
fbshipit-source-id: 4ba912a88
Summary: For `operator=(lhs, rhs)` we want to model it as an assignment if rhs is materialized temporary created in the constructor.
Reviewed By: jvillard
Differential Revision: D10462510
fbshipit-source-id: 998341e69
Summary: Do not create a new location for placement new argument if it already exists.
Reviewed By: jvillard
Differential Revision: D12839942
fbshipit-source-id: 758b67a82
Summary:
In order to know whether a global variable is an integral constant
expression in C, this diff adds a field for the results of isInitICE.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: mbouaziz
Differential Revision: D12838521
fbshipit-source-id: 388bff1f3
Summary:
This may help running the id map bookkeeping on its own in the future
and makes the code slightly more readable in my opinion.
Reviewed By: mbouaziz
Differential Revision: D12858066
fbshipit-source-id: fea4aea63
Summary:
HIL wanted to do its own HTML printing, causing code duplication and hacks to
avoid double opening/closing files. Instead, pass a hook to print SIL
instructions or not.
This also makes the debug HTML be printed even in case of raised exceptions,
which is invaluable to debug crashes or even just reports in the case of
checkers that can raise `Stop_analysis` (pulse only for now).
This also print intermediate abstract states between instructions instead of
only at the start and end of nodes, for moar debugging.
Reviewed By: mbouaziz
Differential Revision: D12857425
fbshipit-source-id: 4ee6c88d6
Summary:
Get rid of `USE_AFTER_LIFETIME`. This could be useful to deploy pulse
alongside the ownership checker too.
Reviewed By: da319
Differential Revision: D12857477
fbshipit-source-id: 8e2a2a37c
Summary: Make the whole type private, introduce constructors for each variant, and deal with the consequences.
Reviewed By: da319
Differential Revision: D12825810
fbshipit-source-id: a01922812
Summary:
Keep `USE_AFTER_LIFETIME` for unclassified errors (for now it contains
vector invalidation too because I can't think of a good name for
them, and maybe it makes sense to wait until we have more types of them
to decide on a name).
Reviewed By: da319
Differential Revision: D12825060
fbshipit-source-id: bd75ef698
Summary:
Getting this right will be long and complex so for now the easiest is to
underreport and only consider as invalid the addresses we know to be invalid on
both sides of a join. In fact the condition for an address to be invalid after
a join is more complex than this: it is invalid only if *all* the addresses in
its equivalence class as discovered by the join are invalid.
Reviewed By: skcho
Differential Revision: D12823925
fbshipit-source-id: 2ca109356
Summary: Similarly as for destructors, we provide an address of an object as a first parameter to constructors. When constructor is called we want to create a fresh location for a new object.
Reviewed By: jvillard
Differential Revision: D10868433
fbshipit-source-id: b60f32953
Summary:
There were several lists constructed unnecessarily -- replaced them with find_maps
and hopefully simplified the logic.
Reviewed By: mbouaziz, jvillard
Differential Revision: D12823559
fbshipit-source-id: 1f06b20f3
Summary:
Sometimes in debug mode, the condition set is too big to print in the
log file. This diff limits the maximum number of conditions to print
as 30.
Reviewed By: mbouaziz
Differential Revision: D12836661
fbshipit-source-id: 8ddfe64a7
Summary: We provide an address of an object as a parameter to destructor. When destructor is called the object itself is invalidated, but not the address.
Reviewed By: jvillard
Differential Revision: D12824032
fbshipit-source-id: 516eebcf8
Summary:
Seems useful to know when we're printing one instruction only, but not when we
print lots of them for readability.
Reviewed By: mbouaziz
Differential Revision: D12823481
fbshipit-source-id: 2beb339f2
Summary:
It terminates narrowing when new and old states are not comparable.
Since current narrowing does not use meet operations guaranteeing
termination of narrowing, it tries to terminate narrowing more
conservatively.
Reviewed By: mbouaziz
Differential Revision: D12815419
fbshipit-source-id: e8b45199e
Summary: It tries division on minmax value approximately, rather than just returning infinities. For example, `[0,2+min(6,s)] / 2` returns `[0,4]`.
Reviewed By: mbouaziz
Differential Revision: D10867091
fbshipit-source-id: d3f49987b
Summary:
This diff preserves values of offset and index separately, rather than
one value of their addition, because premature addition results in
imprecise FPs by the limited expressiveness of the domain.
Reviewed By: mbouaziz
Differential Revision: D10851393
fbshipit-source-id: 1685ead36
Summary:
The time has come to keep track of which tests pass and which are FP/FN
for pulse.
Reviewed By: mbouaziz
Differential Revision: D10854064
fbshipit-source-id: 60938e48f
Summary:
Turns out once a vector array became invalid it stayed that way, instead
of the vector getting a new valid internal array.
Reviewed By: skcho
Differential Revision: D10853532
fbshipit-source-id: f6f22407f
Summary:
Now the domain can reason about `&` and `*` too. When recording `&`
between two locations also record a back-edge `*`, and vice-versa.
Reviewed By: mbouaziz
Differential Revision: D10509335
fbshipit-source-id: 8091b6ec0
Summary: This is more flexible and allows us to give more details when reporting.
Reviewed By: mbouaziz
Differential Revision: D10509336
fbshipit-source-id: 79c3ac1c8
Summary: Just to organise PulseDomain a bit more since it's quite big.
Reviewed By: mbouaziz
Differential Revision: D10509334
fbshipit-source-id: a81b36aa6
Summary: This should stop the bleeding until we get a better solution like shared memory + single writer process.
Reviewed By: mbouaziz
Differential Revision: D10868360
fbshipit-source-id: a4d0b064e
Summary: To avoid reporting on private methods, ignore those starting with underscore. Other cleanups.
Reviewed By: jvillard
Differential Revision: D10558970
fbshipit-source-id: 0572f1e70
Summary:
Invalidating addresses for destructors to catch use after destructor errors.
To pass ownership tests for use after destructor errors, we still need to:
(1) fix pointer arithmetic false positives
(2) add model for placement new to fix false positives
(3) add model for operator= to fix false positives
(4) support inter-procedural analysis for destructor_order_bad test
Reviewed By: jvillard
Differential Revision: D10450912
fbshipit-source-id: 2d9b1ee68
Summary:
It uses platform-dependent integer type widths information when
constructing Sizeof expressions which have a field(`nbytes`)
representing the static results of the evaluation of `sizeof(typ)`.
Reviewed By: mbouaziz
Differential Revision: D10504715
fbshipit-source-id: 0c79d37d8
Summary: Reports will now be issued for the class loads of the methods specified by the option `--class-loads-roots`.
Reviewed By: jvillard
Differential Revision: D10466492
fbshipit-source-id: 91456d723
Summary:
Instead of the non-sensical piecewise join we had until now write
a proper one. Hopefully the comments explain what it does. Main one:
```
(* high-level idea: maintain some union-find data structure to identify locations in one heap
with locations in the other heap. Build the initial join state as follows:
- equate all locations that correspond to identical variables in both stacks, eg joining
stacks {x=1} and {x=2} adds "1=2" to the unification.
- add all addresses reachable from stack variables to the join state heap
This gives us an abstract state that is the union of both abstract states, but more states
can still be made equal. For instance, if 1 points to 3 in the first heap and 2 points to 4
in the second heap and we deduced "1 = 2" from the stacks already (as in the example just
above) then we can deduce "3 = 4". Proceed in this fashion until no more equalities are
discovered, and return the abstract state where a canonical representative has been chosen
consistently for each equivalence class (this is what the union-find data structure gives
us). *)
```
Reviewed By: mbouaziz
Differential Revision: D10483978
fbshipit-source-id: f6ffd7528
Summary:
Instead of propagating a partial state give up the analysis of the
function entirely on error. The state after an error is mostly
non-sensical so until we know better just giving up makes sure the
analysis remains sensible and produce fewer spurious warnings.
Reviewed By: mbouaziz
Differential Revision: D10483979
fbshipit-source-id: 171ec8469
Summary: Since we only care about reachability, drop the interpreter and just fold over all instructions in the procdesc.
Reviewed By: mbouaziz
Differential Revision: D10461783
fbshipit-source-id: 3e0b42a48
Summary: We don't need the machinery of HIL, or its complexity for this analysis.
Reviewed By: ddino
Differential Revision: D10461641
fbshipit-source-id: 2e7d3ab8e
Summary: First version of an analyzer collecting classes transitively touched.
Reviewed By: mbouaziz
Differential Revision: D10448025
fbshipit-source-id: 0ddfefd46
Summary: Even though we recognize the lock/unlock methods of various classes in C++, to report we insist that the class must have a `mutex` member. Equalize the two sets of types recognized.
Reviewed By: da319
Differential Revision: D10446527
fbshipit-source-id: f42ae1a35
Summary:
It avoids checking integer overflow when it definitely cannot happen.
For example, it does not check integer overflow of addition when one
of parameters is a negative number, or underflow of subtraction when
its first parameter is a positive number.
Reviewed By: mbouaziz
Differential Revision: D10446161
fbshipit-source-id: b8c86e1b2
Summary: We assume multiplication of 1 is safe. It happens sometimes by multiplying `sizeof(char)`.
Reviewed By: mbouaziz
Differential Revision: D10444680
fbshipit-source-id: 2f33be280
Summary: This diff changes pp of binary operation condition in order to avoid a `make test` failure. For the same `uint64_t` type, it is translated to `unsigned long long` in 64bit mac, but `unsigned long` in 64bit linux, which made a `make test` failure.
Reviewed By: mbouaziz
Differential Revision: D10459466
fbshipit-source-id: 449ab548e
Summary:
`Location` was clashing with the `Location` module, so use `Address`
instead.
When invalidating an address, remember the "actor" of its invalidation,
i.e. the access expression leading to the address and the source
location of the corresponding instruction.
When checking accesses, also pass the actor responsible for the access,
so that when we raise an error we know:
1. when and why a location was invalidated
2. when and why we tried to read it after that
Reviewed By: mbouaziz
Differential Revision: D10446282
fbshipit-source-id: 3ca4fb3d4
Summary:
Model `x[y]` and `x.push_back(i)` to catch the classic bug of "take
reference inside vector, invalidate, then use again".
Reviewed By: da319
Differential Revision: D10445824
fbshipit-source-id: 21ffd9677
Summary:
Do the intersection of the heap and stack domains, and the union of the
invalid location sets. This forgets invalid locations that appear only
in one heap, unfortunately. We can start with this and improve later.
Reviewed By: mbouaziz
Differential Revision: D10445825
fbshipit-source-id: cc24460af
Summary:
It gets built-in integer type widths of C from the clang plugin. For Java, it uses fixed widths.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jvillard
Differential Revision: D10397409
fbshipit-source-id: 73958742e
Summary:
Store the correct version of the proc desc into the DB when specialising
it. This doesn't seem to be used but is useful for investigating after
the fact (eg, if we could print individual cfgs).
Reviewed By: mbouaziz
Differential Revision: D10380708
fbshipit-source-id: fd72dbfc2
Summary:
New analysis in foetal form to detect invalid use of C++ objects after their
lifetime has ended. For now it has:
- A domain consisting of a graph of abstract locations representing the heap, a map from program variables to abstract locations representing the stack, and a set of locations known to be invalid (their lifetime has ended)
- The heap graph is unfolded lazily when we resolve accesses to the heap down to an abstract location. When we traverse a memory location we check that it's not known to be invalid.
- A simple transfer function reads and updates the stack and heap in a rudimentary way for now
- C++ `delete` is modeled as adding the location that its argument resolves to to the set of invalid locations
- Also, the domain has a really crappy join and widening for now (see comments in the code)
With this we already pass most of the "use after delete" tests from the
Ownership checker. The ones we don't pass are only because we are missing
models.
Reviewed By: mbouaziz
Differential Revision: D10383249
fbshipit-source-id: f414664cb
Summary:
In some error paths we may end up querying the state for the instruction
being executed, but that is only populated by biabduction. Now it's
populated by AI checkers too.
Reviewed By: jberdine
Differential Revision: D10381068
fbshipit-source-id: dca1325d7
Summary:
When the backend crashes we print which instruction/file/... we were analysing,
but because of recursion we can end up repeating that information all
the way to the toplevel call.
This makes sure we only print the innermost one, we don't care about the
calling context because the analysis is compositional.
Reviewed By: mbouaziz
Differential Revision: D10381141
fbshipit-source-id: 1c92bb861
Summary:
Trace events would crash when infer subprocesses were spawned by the build
system because they didn't detect if the file was already initialised
correctly.
Also trace the clang capture.
Reviewed By: mbouaziz
Differential Revision: D10380745
fbshipit-source-id: 76e1d4d7e
Summary:
It avoids raising an exception when unexpected arguments are given to
placement new. We will revert this after fixing the frontend to parse
user defined `new` correctly in the future.
Reviewed By: mbouaziz
Differential Revision: D10378136
fbshipit-source-id: d494f781b
Summary:
Use same code for deciding whether two accesses conflict across java/clang, by adapting that of the clang version.
Eliminate/simplify some code.
Reviewed By: mbouaziz, jberdine
Differential Revision: D10217383
fbshipit-source-id: dc0986d05
Summary:
It unsets `var_exp_typ` of `trans_state` during the translations of
placement parameters, so they are translated independently against the
target variable and class of the `new` function.
Reviewed By: mbouaziz, jvillard
Differential Revision: D10161419
fbshipit-source-id: 7f588a91c
Summary: It enables placement_new to get three parameters, which happens when placement_new is overloaded (e.g. Boost).
Reviewed By: mbouaziz
Differential Revision: D10100324
fbshipit-source-id: 0ecb0a404
Summary:
Using debugging on uninit raised an exception. A file was opened twice and closed twice.
This happened because the two abstract interpreters (SIL, LowerHIL) conflicted.
Let's use the LowerHIL-AI directly
Reviewed By: jvillard
Differential Revision: D10126442
fbshipit-source-id: 113c9e131
Summary:
Load proc descs from the "procedures" sqlite table instead of from
file-wide cfgs stored in the "source_files" table. This removes the need
for a cache of these file-wide CFGs, which was needed because loading
them is expensive and potentially needed in case we need to load the
proc descs of several procedures in the same file. Now we can just load
the proc descs one by one and not worry about caching.
Reviewed By: jberdine
Differential Revision: D10173355
fbshipit-source-id: 665636121
Summary:
Fix the logic for computing duplicate symbols. It was broken at some point and some duplicate symbols creeped into our tests. Fix these, and add a test to avoid duplicate symbols detection to regress again.
Also, this removes one use of `Cfg.load`, on the way to removing file-wide CFGs from the database.
Reviewed By: ngorogiannis
Differential Revision: D10173349
fbshipit-source-id: a0d2365b3
Summary:
First step: record the proc desc of each procedure in the "procedures"
table. Update them according to the attributes logic. Bonus: this
proc-desc for a procedure is now always in sync with its attributes.
For now nothing uses these per-procedure cfgs. Later diffs make more and
more use of them and eventually kill off file-wide CFGs from the
database.
Reviewed By: jberdine
Differential Revision: D10173350
fbshipit-source-id: b6d222bee
Summary:
There's nothing to analyse for declared procedures, and if there is then
that's because they are defined outside the source file and should not
be analysed unless ondemand needs them.
Reviewed By: ngorogiannis
Differential Revision: D10173353
fbshipit-source-id: 39c42eb7a
Summary:
In a future commit `Attributes` will depend on `Procdesc` and that
creates a cycle for the functions concerned with specialising proc
descs, which need `Attributes`.
Reviewed By: jberdine
Differential Revision: D10173354
fbshipit-source-id: 6c4ff82f0
Summary: The Nullsafe checker integration is filtering out the pre-existing warnings based on the bug hash only. However, there was a typo in the regexp and the bug hash for methods in anonymous classes was then depending on the name (in the bytecode) of the anonymous class, i.e. depending on the `N` in `ClassName$N.methodName()` where `N` is the occurrence of the anonymous class in `ClassName`. As a consequence, introducing a new anonymous class in a file was leading to all the reports in the subsequent anonymous classes to be marked as introduced.
Reviewed By: jberdine
Differential Revision: D10186651
fbshipit-source-id: 42e27c132
Summary:
An order constraint (A,B) means we take lock A and before releasing it we perform B (whatever that is).
Previously if a method call crossed class boundaries, we removed the callee's order constraints before integrating the callee's summary to that of the caller. The reasoning was that this may lead to reports blaming a caller for something they are very far from, plus a proliferation of reports with the same bad endpoint.
The first reason still applies, but this is a general problem. It may be better to report and let developers deal with it.
The second reason is moot, since in differential mode most of these reports are hidden.
Reviewed By: jberdine
Differential Revision: D10173200
fbshipit-source-id: 9afbf292c
Summary:
Instead of many successive implicit transactions to write each
attributes of the procedures in a file, write them all in a single
transaction.
Reviewed By: jberdine
Differential Revision: D10173351
fbshipit-source-id: 5f2a5ffb5
Summary: It uses big int, instead of 63bits int of OCaml, in the interval domain in order to get preciser numeric values in the future.
Reviewed By: jvillard
Differential Revision: D10123364
fbshipit-source-id: c217f4366
Summary:
Before storing attributes to disk, we fix their location information if needed.
Ideally we wouldn't be creating bogus attributes but sometimes the frontends
are built in a way that makes it difficult to do otherwise, thus we have to
live with this. However, what's aggravating is that attributes are also saved
in the proc descs of these procedures but in their wrong version. This makes
the two versions (inside the procedures sqlite table and inside the procdesc in
the cfg of the source_files table) agree.
Reviewed By: jeremydubreil
Differential Revision: D10084708
fbshipit-source-id: 5bfd5da3a
Summary:
Make distinct reports on strict mode violations.
For now, restrict to direct violations (UI threads calls transitively a violating method).
Will assess impact and enable indirect reports later (via locks).
Reviewed By: mbouaziz
Differential Revision: D10126780
fbshipit-source-id: 9c75930bc
Summary: Option is not needed, just set `default` record to agree with function default arguments.
Reviewed By: da319
Differential Revision: D10050463
fbshipit-source-id: e7d13bbd5
Summary:
The 2nd iteration of analysis of the Android core implementation did not yield actionable models, so delete those.
Turn on strict-mode reporting by default, when doing starvation analysis (which is disabled by default).
Reviewed By: jvillard
Differential Revision: D9991448
fbshipit-source-id: 67504591d
Summary:
New clang in the plugin \o/
Changes that were needed:
- (minor) Some extra AST nodes
- defining a lambda and calling it in the same line (`[&x]() { x = 1; }()`) used to get translated as a call of the literal but now an intermediate variable gets created, which confuses uninit in one test. I added another test to showcase the limitation this is hitting: storing the lambda in a variable then calling it will not get caught by the checker.
The controller you requested could not be found.: facebook-clang-plugins
Reviewed By: jeremydubreil
Differential Revision: D10128626
fbshipit-source-id: 8ffd19f3c
Summary: Before this diff, the analysis would only lookup the attributes with the classname appearing in the instruction. However, it would fail to find those attributes for inherited and not overridden methods. With this diff, the attributes are now searched recursively in the super classes.
Reviewed By: mbouaziz
Differential Revision: D10007469
fbshipit-source-id: 77d721cba
Summary: We may want to use these traces more generally, so put them into their own module.
Reviewed By: mbouaziz
Differential Revision: D10084404
fbshipit-source-id: 8f87c17f4
Summary: This fixes some cases of false positives where the analysis will compare with the wrong overridden methods. This could later be improved with the possibility to do sub-typing comparison on the parameters.
Reviewed By: ngorogiannis
Differential Revision: D9985249
fbshipit-source-id: 7998d8619
Summary:
Sometimes the default timeout of 10s is not enough(!). Make it
configurable while we work on not hitting it anyway.
Reviewed By: da319
Differential Revision: D10083772
fbshipit-source-id: ab949039f
Summary:
Keep `--analyzer` around for now for integrations that depend on it.
Also deprecate the `--infer-blacklist-path-regex`,
`--checkers-blacklist-path-regex`, etc. in favour of
`--report-blacklist-path-regex` which more accurately represents what these do
as of now.
Rely on the current subcommand instead of the analyzer where needed, as most of
the code already does.
Reviewed By: jeremydubreil
Differential Revision: D9942809
fbshipit-source-id: 9380e6036
Summary: If we get to that point, it means we already want to run the analysis so no need for this check.
Reviewed By: mbouaziz
Differential Revision: D9942702
fbshipit-source-id: e89e22c91
Summary:
Goal of the stack: deprecate the `--analyzer` option in favour of turning
individual features on and off. This option is a mess: some of the options are
now subcommands (compile, capture), others are aliases (infer and checkers),
and they can all be replicated using some straightforward combination of other
options.
This diff: stop using `--analyzer` in tests. It's mostly `checkers` everywhere,
which is already the default. `linters` becomes `--no-capture --linters-only`.
`infer` is supposed to be `checkers` already. `crashcontext` is
`--crashcontext-only`.
Reviewed By: mbouaziz
Differential Revision: D9942689
fbshipit-source-id: 048281761
Summary: Use the value of other options instead since we're trying to get rid of it. This should be equivalent.
Reviewed By: jeremydubreil
Differential Revision: D9943274
fbshipit-source-id: 055e1bdd2
Summary: It is common on Android code to recycle the `View` object by nullifying them in the `onDestroy()` or `onDestroyView()` methods. In this case, the outer `Fragment` object structure is preserve while the inner `View` object are set to null for the garbage collect to release the memory. However, if the fields are only set to `null` in the `onDestroy*()` methods, those fields cannot be `null` during the active lifecycle of the `Fragment`, so it is not necessary to annotate those fields with `Nullable`.
Reviewed By: mbouaziz
Differential Revision: D10024458
fbshipit-source-id: b05e538d9
Summary:
The method matcher is now used sufficiently it warrants refactoring out into its own module.
Also, kill dev-android-strict-mode and leave starvation-strict-mode as the stronger option.
Reviewed By: jeremydubreil
Differential Revision: D9990753
fbshipit-source-id: 626a70a19
Summary:
This allows infer devs to see the effects their changes have on the infer manuals.
Check in the manuals for each subcommand + the output of `--help-full` to get a
complete picture. If this is too annoying we can also check in only
`--help-full`.
Reviewed By: mbouaziz
Differential Revision: D9916404
fbshipit-source-id: b981e2c33
Summary:
When a deprecated option is found in .inferconfig, we change it to `--<long>`
on the command line, but that string can be empty. Plumb things through so that
some non-empty string is selected in that case.
Reviewed By: mbouaziz
Differential Revision: D9989189
fbshipit-source-id: c0f46bca9
Summary:
We can fill the gaps in the trace now: they correspond to processes waiting on
pipes. This suggests a more efficient protocol would help perf, at least on the
small example I tried. Anyhow, it shows it's useful to trace pipe operations.
Some small gaps remain but they look like they could be explained by rounding errors.
Reviewed By: mbouaziz
Differential Revision: D9934437
fbshipit-source-id: 1d5f53a6d
Summary: They actually don't take very much time at all but it's good to know that they don't.
Reviewed By: mbouaziz
Differential Revision: D9832277
fbshipit-source-id: 7486fb40c
Summary: Use `PerfEvent` to record the execution time of individual checkers.
Reviewed By: jeremydubreil, mbouaziz
Differential Revision: D9832102
fbshipit-source-id: 678fca155
Summary:
This adds an option `--trace-events` that generates a Chrome trace event[1] to
quickly visualise the performance of infer.
Reviewed By: mbouaziz
Differential Revision: D9831599
fbshipit-source-id: 96a33c627
Summary:
The model for `getcwd` assumes the first argument should be non-null when in fact a NULL pointer is legitimate and results in allocation:
> As an extension to the POSIX.1-2001 standard, glibc's getcwd() allocates the buffer dynamically using mal‐
> loc(3) if buf is NULL. In this case, the allocated buffer has the length size unless size is zero, when buf
> is allocated as big as necessary. The caller should free(3) the returned buffer.
I suggest this glibc extension be used for the getcwd model to reduce false positives.
Pull Request resolved: https://github.com/facebook/infer/pull/925
Reviewed By: mbouaziz
Differential Revision: D9830450
Pulled By: jvillard
fbshipit-source-id: 95c4862b1
Summary:
Now we see which file/procedure/instruction is responsible for a crash in the
backend. Biabduction and eradicate not supported yet for the instruction-level
debug.
Reviewed By: mbouaziz, da319
Differential Revision: D9915666
fbshipit-source-id: 279472305
Summary:
Previously we wouldn't flush the formatter hence the error message would
generally not make it to the log file. Add the backtrace too, although only the
first few lines appear for some reason...
Reviewed By: ngorogiannis
Differential Revision: D9915499
fbshipit-source-id: 43cd9e36e
Summary: This fixes a flaky test where some issues would disappear and re-appear.
Reviewed By: da319
Differential Revision: D9027686
fbshipit-source-id: 5ac314096
Summary: Always read the attributes from the attributes DB instead of trying to read the attributes from the analysis summaries
Reviewed By: mbouaziz
Differential Revision: D9845085
fbshipit-source-id: aef48e6bf
Summary: No longer report inconsistencies with the annotations with subtyping when the super class is in an external packages since those warnings are not necessarily accurate or actionable.
Reviewed By: ezgicicek
Differential Revision: D9845098
fbshipit-source-id: 1f2bcd739
Summary: This allows Eradicate to detect more issues related to inconsistent annotations with sub-typing.
Reviewed By: ngorogiannis
Differential Revision: D9807306
fbshipit-source-id: 159d5d4e8
Summary: Display the errors report as red in the termninal, warnings as yellow, advice as blue and the like as green.
Reviewed By: mbouaziz
Differential Revision: D9828302
fbshipit-source-id: 30315eac2
Summary:
First version of differential for costs, based on polynomial's degree's variation. The rule is very simple:
For a given polynomial that is available before and after a diff, `if degree_before > degree_after`, then the issue becomes `fixed`. Instead, `if degree_before < degree_after`, then the issue becomes `introduced`.
Reviewed By: ezgicicek
Differential Revision: D9810150
fbshipit-source-id: d08285926
Summary: Buck is allowing compiler commands with no source files and skipping them when using the in-memory complier mode. However, those commands are not skipped when using an external compiler. Simulating this behavior at the level of Infer.
Reviewed By: mbouaziz, ngorogiannis
Differential Revision: D9795043
fbshipit-source-id: e80cfa453
Summary: There may be several reasons why we think a method is on the UI thread. Choose to keep the shortest via join.
Reviewed By: jeremydubreil
Differential Revision: D9806944
fbshipit-source-id: 89d27456d
Summary:
Callsites of `Reporting.log_error/warning` always use `Exceptions.Checkers`, let's simplify the API.
Under the hood it still creates an exception, but this can be cleaned up later.
Reviewed By: jeremydubreil
Differential Revision: D9799860
fbshipit-source-id: 6492a60b4
Summary: This feature is not currently used and crashes when enabled.
Reviewed By: ngorogiannis
Differential Revision: D9805110
fbshipit-source-id: db405c79e
Summary:
For some unexplained reason, some of the functions registered in the Epilogues would sometimes be executed several times. I could not figure out why.
This diff fixes that, but also has more explainable benefits:
- Do not run epilogues registered in the parent in the children. Previously it
would do so, but probably only if the children registered some epilogue given
that `at_exit` must be called again once on the child (but the value of the ref
in `Pervasives` would not have been reset).
- Unified behaviour for early and late epilogues given that we now handle both of these directly
We already have all the control needed to run epilogues when needed: we know
when infer exits, and we know when children processes exit.
Reviewed By: mbouaziz
Differential Revision: D9752046
fbshipit-source-id: 13af40081
Summary:
The constructor `` `Typ`` is never used to build values. Removing type
substitutions from Sil.ml had knock-on effect on Typ.ml etc., resulting in more
deleted code around type substitutions \o/
Reviewed By: mbouaziz
Differential Revision: D9769340
fbshipit-source-id: 509cbd284
Summary: Sometimes it's very confusing to see why infer believes a method is running on the UI thread. Make a trace out of all the relevant info.
Reviewed By: mbouaziz
Differential Revision: D9781212
fbshipit-source-id: 6d018e400
Summary:
Turn off by default until mature enough.
Also rename the dev-strict-mode test dir to highlight the dev part.
Reviewed By: mbouaziz
Differential Revision: D9775571
fbshipit-source-id: c3a41bbdf
Summary:
First step in writing an analyzer that is meant to run only on Android core library implementation.
This will, when finished, compute the library entrypoints that may lead to a strict mode violation.
The normal analyzer will use those to statically flag strict mode violations in app code.
Strict Mode is an Android debug mode, where doing certain things (like disk read/write or network activity) on the UI thread will raise an exception. We want to statically catch these, as well as indirect versions (the UI thread takes a lock and another thread holding that lock calls a method that would be a strict mode violation).
Reviewed By: mbouaziz
Differential Revision: D9634407
fbshipit-source-id: c30bcedb3
Summary:
It detaches the Summary module from BufferOverrunDomain.
Depends on D9194130
Reviewed By: jvillard
Differential Revision: D9194375
fbshipit-source-id: 30392b5ce
Summary: It simplifies instantiataion of `ret_alias`. While it got `ret_alias` values by iterating caller's and callee's memory, now it gets `ret_alias` by evaluating symbol paths included in location values.
Reviewed By: mbouaziz
Differential Revision: D9569606
fbshipit-source-id: a3326bb81
Summary: Now that the def file is stored in the issue type (hence in the issue desc), no need for it here any more.
Reviewed By: martinoluca
Differential Revision: D9654109
fbshipit-source-id: 0b3c413bf
Summary:
- Let's call `IssueType.from_string` once only
- Use properly defined issue types for builtin linters
Reviewed By: martinoluca
Differential Revision: D9654105
fbshipit-source-id: 947b50a51
Mehdi Bouaziz
Jules Villard
Jeremy Dubreil
Sungkeun Cho
Nikos Gorogiannis
Ezgi Çiçek
Daiva Naudziuniene
Fabio Milano
David Lively
Ted Reed
Dino Distefano
Martino Luca
Martin Trojer
Josh Berdine
Julian Sutherland
Vincent Siles
Thomas M. DuBuisson
dWiGhT
Andrey Epin